Wear Resistance of Coatings from Self‐Fluxing Alloys after Laser Doping under Dry Friction Conditions

The wear resistance of Ni–Cr–B–Si–C coatings after laser treatment with a doping covering under dry friction conditions has been investigated. The microstructure of coatings after fusion by a gas burner and a laser beam and the roughness and waviness parameters of the friction surfaces before and after wear have been investigated.     

Stress State of Bent Buried Pipelines

The authors consider edge effects in buried pipelines that occur in the region of joining of a straight buried pipe and a bent insert (factory bend, elbow, or an elastically bent segment). The action of those effects results in the appearance of additional bending moments, which are proportional to the difference between the axial force in an infinite straight pipeline and that in a closed-end pipe, and depend on the geometrical parameters of the pipeline and physical-mechanical characteristics of the soil. Specific examples of analysis of elastic interaction of a pipeline with the soil for pipe bends with various radii of the bend arc are offered. It is shown that additional bending stresses may exceed appreciably the stresses from the axial force, and therefore, they should be taken into account when designing and building pipelines. The solution for an elastically bent segment has been obtained and analyzed.     

The Role of Network Topologies in the Optical Core of IP-over-WDM Networks with Static Wavelength Routing

In this paper, we present a performance analysis of network topologies for the optical core of IP-over-WDM networks with static wavelength routing. The performance analysis is focused on regular degree four topologies, and, for comparison purposes, degree three topologies are also considered. It is shown that the increase of the nodal degree from three (degree three topology with smallest diameter) to four (degree four topology with smallest diameter) improves the network performance if a larger number of wavelengths per link is available. However, the influence of wavelength interchange on the nodal degree gain is small. The performance of regular degree four topologies with smallest diameter is also compared with the performance of mesh–torus topologies (which are also degree four topologies), and it is shown that the blocking probability of degree four topologies with smallest diameter is about two orders of magnitude lower than the blocking probability of mesh–torus topologies. It is also presented a performance comparison of WDM-based networks with nodal degrees ranging from two to five and it is shown that the increase of the nodal degree from two to three leads to high nodal degree gains, while de increase of the nodal degree from four to five leads to low nodal degree gains. These results show that degree three and degree four topologies are very attractive for use in the optical core of IP-over-WDM networks.     

Surface electronic states in metal-porous silicon-silicon structures

The character of electronic states in porous silicon (PS)-Si, Pd-PS interfaces, and/or PS bulk at the formation of the metal-PS-silicon heterostructure was studied. The energy parameters were estimated using the deep-level transient spectroscopy and capacitance-voltage characteristics at the accounting of the voltage drop distribution along the structure. The analytical expression for voltage drop distribution along dielectric layer, porous layer and space charge region in silicon was obtained by solving the equation for continuity of the electrostatic induction vector. The electronic states studied were shown to manifest the quasi-continuous sub-band in the energy gap if the porous layer was 30-nm thick. Their density increased, as the energy position was being transformed to a deeper energy level of E_v+0.81 eV at the PS layer growing to 90 nm wide.     

Standardization of Technological Parameters for Drawing Optical Rods Using Experimental Models

A method for constructing experimental models of drawing optical rods based on experimental data is considered. The models obtained make it possible to identify admissible technological parameter fluctuations in the range selected.     

Nanoscale Crystallization in the Amorphous Alloy Fe79P14.2Si4.4Mn2.2V0.2 upon Pulsed Photon Annealing

The effect of pulsed photon annealing with energy densities from 1.4 to 42 J/cm² for various lengths of time on the structure of the amorphous alloy Fe₇₉P_14.2Si_4.4Mn_2.2V_0.2 was studied by x-ray diffraction, differential scanning calorimetry, and transmission electron microscopy. The results demonstrate that short-term irradiation with low energy densities leads to surface relaxation of the amorphous alloy, increases the strength of the surface layer, and reduces the internal-friction peak. Longer term photon annealing leads to crystallization of the alloy throughout the sample thickness.     

An efficient TDMA start-up and restart synchronization approach for distributed embedded systems

A desired attribute in safety-critical embedded real-time systems is a system time and event synchronization capability on which predictable communication can be established. Focusing on bus-based communication protocols, we present a novel, efficient, and low-cost start-up and restart synchronization approach for TDMA environments. This approach utilizes information about a node's message length that forms a unique sequence to achieve synchronization such that communication overhead can be avoided. We present a fault-tolerant initial synchronization protocol with a bounded start-up time. The protocol avoids start-up collisions by deterministically postponing retries after a collision. We also present a resynchronization strategy that incorporates recovering nodes into synchronization.