首钢烧结配加扬地粉试验研究

介绍了首钢原料条件下配加扬地粉对烧结生产影响的实验室研究.随着扬地粉配入量的增加,烧结矿转鼓强度、成品率改善,燃耗有少量上升,利用系数增加,低温还原粉化指数变差.研究结果表明:在首钢目前条件下,配入10%～20%的扬地粉是可行的.二烧车间进行了扬地粉工业试验,其最高配比达到30%,工业试验时烧结各项指标变化与实验室试验结果基本一致.     

三峡库区滑坡地质力学模型试验技术研究

在三峡库区滑坡地质力学模型试验研究基础上，阐述了滑坡地质力学模型试验的研究现状。指出时间相似比在滑坡模型相似判据研究中须慎重选择；提出以重晶石粉系相似材料能较好模拟软土体滑坡；并介绍了模型相似材料测试中低参数指标测试存在的问题以及模型试验测试技术中的最新进展。     

电镀工艺条件变化对片状铁吸收剂吸波性能的影响

通过电镀法制备片状磁性吸收剂，用SEM、XRD等手段对其进行表征。用网络分析仪测试了不同工艺条件下吸收剂样品2～18GHz的电磁参数，并结合晶粒尺寸因素研究了不同工艺条件下对吸收剂电磁参数的影响．结果表明，不同的工艺条件对吸收剂电磁参数的影响具有规律性，可通过合理配置工艺参数来提高吸收剂的吸波性能。     

Influence of nano-scaled dispersed second phase on substructure of deformed dispersion strengthened copper alloy

The deformation behavior of dispersion strengthened copper alloy Cu-Al2O3 was studied by TEM. The results show that nano-scaled dispersed second phase not only increases dislocation density in matrix, but also has an important influence on the dislocation substructure. The presence of fine dispersed Al2 O3 particles results in a uniform and random dislocation distribution in matrix copper and causes the difficulty in formation of dislocation cell structure and the decrease in the amount of cell structure during deformation. Deformation gives rise to much more dislocations and dislocation cells form more difficultly and the decrease in the cell size with the increase of dispersion degree.     

试论当代大学生IT素质的培养

从IT素质的涵义出发，论述了IT素质的涵盖内容、培养大学生IT素质的重要性以及IT素质的本质与特点．对高校树立人才培养新理念、培养优秀IT人才提出了有关建议及应对措施。     

河北省水安全现状分析及对策探讨

从水资源与水环境两方面分析了河北省水安全的现状,指出影响水安全的因素在于自然因素、人为因素及人与自然的不协调因素,并针对水安全问题可能引发的健康安全、粮食安全、经济安全、生态环境安全进行了讨论,最后探讨了解决河北省水安全问题的对策。     

Time Characterization of High Density Gas Jet from a Pulsed Supersonic Nozzle via Laser Produced Plasma

A high-density gas jet supersonic nozzle is reported in this paper. The jitter and actuation time of the nozzle is determined by the pin discharge and laser spark radiation respectively. The jitter time of the nozzle is within 10μs with the backing pressure as high as 25 bar. With a nanosecond laser pulse focused on the gas jet about 1 mm below the nozzle, the actuation time is calculated to be about 15 ms by detecting the laser produced spark radiation, which reveals the existence of the gas jet and the relative gas density evolving with time. Consequently the gas density is estimated to be well above 10^19 cm^-3, compared with theoretical simulations from the nozzle parameters.     

合金钢连铸机生产工艺分析及实践

对新钢特殊钢有限责任公司整个合金钢连铸机的生产工艺进行了分析，提出了提高钢水质量和优化连铸工艺参数的有效措施，使铸坯的质量得到了有效控制和改善。     

透反液晶显示器

兼有透射型和反射型液晶显示优点的透反液晶显示可工作于透射和反射两种显示模式，它将广泛应用于手机、PDA等通讯领域。透反液晶显示可分为单盒厚和双盒厚两大类。又可分为扭曲型和非扭曲型两种。为了研制出高性能透反液晶显示器，需解决透反两个显示区的响应时间、光效率、色饱和度的差异以及视角等问题。文中介绍了Sharp公司开发的2种基本的透反液晶显示。以及3种新近开发的高性能透反液晶显示。随着应用市场的扩大和技术的进步，透反液晶显示将会进一步得到发展。     

Electrochemical C-V Characteristics and Photoluminescence of a-C∶N Films

Amorphous carbon (a-C) films and amorphous carbon films incorporating with the nitrogen (a-C∶N) were deposited on silicon substrates in a radio-frequency driven plasma enhanced chemical vapour deposition system, while the surface electrical properties of films were investigated by electrochemical capacitance-voltage measurements. It was examined the effect of the interface defects on the properties and deduced that the conducting type of a-C∶N films was n-type. Subsequently, a comparative studies of a-C and a-C∶N films were performed by photoluminescence spectra depending on the temperature. With the decrease of the temperature, the main band with peak energy of 2.48 eV in the a-C∶N films was more intense compared with the other three bands caused by amorphous C in the a-C films.