Method for Production of α-Alumina Whiskers via Vapor-Liquid-Solid Deposition

α-alumina (α-Al₂O₃, corundum) fibers exhibit high thermal and chemical stability, as well as good mechanical properties, even at high temperatures. Such characteristics make them good candidates for use in composites. Nevertheless, very few methods of producing α-Al₂O₃ fibers are available. In the present work, we describe a method that uses aluminum pieces deposited on SiO₂ powder, in an argon atmosphere, at temperatures in the range 1300°–1600°C. The α-Al₂O₃ fibers are obtained via vapor-liquid-solid deposition. The novel addition of nickel and cobalt (or their oxides) allows the use of temperatures >1500°C, resulting in improved fiber production. We demonstrate that the metals do not contaminate the fibers produced in this way. Finally, we also estimate the tensile strength of the Al₂O₃ fibers produced through this method.     

Bio-based sustainable films from the Algerian Opuntia ficus-indica cladodes powder: Effect of plasticizer content

The present study investigated the fabrication and characterization of bio-based sustainable films composed of a terrestrial plant raw material, namely Opuntia ficus-indica (OFI) cladodes powder (CP) and a marine seaweed derivative, namely agar (A). The effect of glycerol concentration on the properties of the casted films was evaluated at four different contents, namely 30, 40, 50 and 60 wt%. The films present UV-blocking properties, as well as moderate mechanical performance, thermal stability, and water vapor transmission rate (WVTR). The results point to an increase in thickness, elongation at break, moisture content, water solubility, and WVTR with increasing glycerol content. On the contrary, Young's modulus, tensile strength, and water contact angle decreased as glycerol concentration increased. The best combination is obtained for the film with 30% glycerol, based on an intermediate compromise between physical, mechanical, thermal, and barrier properties. All these outcomes express the potentiality of the powder obtained from grinding the OFI cladodes as raw material to produce low-cost films for the development of sustainable packaging materials.     

When a Tritrophic Interaction Goes Wrong to the Third Level: Xanthoxylin From Trees Causes the Honeybee Larval Mortality in Colonies Affected by the River Disease

The “River Disease” (RD), a disorder impacting honeybee colonies located close to waterways with abundant riparian vegetation (including Sebastiania schottiana, Euphorbiaceae), kills newly hatched larvae. Forager bees from RD-affected colonies collect honeydew excretions from Epormenis cestri (Hemiptera: Flatidae), a planthopper feeding on trees of S. schottiana. First-instar honeybee larvae fed with this honeydew died. Thus, we postulated that the nectars of RD-affected colonies had a natural toxin coming from either E. cestri or S. schottiana. An untargeted metabolomics characterization of fresh nectars extracts from colonies with and without RD allowed to pinpoint xanthoxylin as one of the chemicals present in higher amounts in nectar from RD-affected colonies than in nectars from healthy colonies. Besides, xanthoxylin was also found in the aerial parts of S. schottiana and the honeydew excreted by E. cestri feeding on this tree. A larva feeding assay where xanthoxylin-enriched diets were offered to 1^st instar larvae showed that larvae died in the same proportion as larvae did when offered enriched diets with nectars from RD-colonies. These findings demonstrate that a xenobiotic can mimic the RD syndrome in honeybee larvae and provide evidence of an interspecific flow of xanthoxylin among three trophic levels. Further, our results give information that can be considered when implementing measures to control this honeybee disease.

     

GraftFast Surface Engineering to Improve MOF Nanoparticles Furtiveness

Controlling the outer surface of nanometric metal–organic frameworks (nanoMOFs) and further understanding the in vivo effect of the coated material are crucial for the convenient biomedical applications of MOFs. However, in most studies, the surface modification protocol is often associated with significant toxicity and/or lack of selectivity. As an alternative, how the highly selective and general grafting GraftFast method leads, through a green and simple process, to the successful attachment of multifunctional biopolymers (polyethylene glycol (PEG) and hyaluronic acid) on the external surface of nanoMOFs is reported. In particular, effectively PEGylated iron trimesate MIL‐100(Fe) nanoparticles (NPs) exhibit suitable grafting stability and superior chemical and colloidal stability in different biofluids, while conserving full porosity and allowing the adsorption of bioactive molecules (cosmetic and antitumor agents). Furthermore, the nature of the MOF–PEG interaction is deeply investigated using high‐resolution soft X‐ray spectroscopy. Finally, a cell penetration study using the radio‐labeled antitumor agent gemcitabine monophosphate (³H‐GMP)‐loaded MIL‐100(Fe)@PEG NPs shows reduced macrophage phagocytosis, confirming a significant in vitro PEG furtiveness.     

Biogenic amines in Spanish beers: differences among breweries

Ten biogenic amines in Spanish beers were studied using HPLC. Agmatine, tyramine and putrescine were the prevailing amines, while histamine,-phenylethylamine, tryptamine, cadaverine, spermine and spermidine were detected at relatively low levels (in general <2 mg/l). On the basis of the wide range of levels observed for tyramine (from 1.90 to 31.55 mg/l), the consumption of beer requires restriction in patients receiving monoamine oxidase inhibitor drugs. Biogenic amine levels in beers of the same type from the same company and from different companies were monitored every month over 1 year. Agmatine and putrescine levels showed minimal fluctuations in beers from the same company as well as from different breweries. Raw materials and brewing conditions would not affect the levels of those amines. However, tyramine levels were subject to wide fluctuations in beers produced by particular breweries irrespective of whether they were produced by the same company. Relatively high levels of tyramine were specific to some breweries.     

Surface plasmon resonance imaging (SPRi) as an alternative technique for rapid and quantitative screening of small molecules, useful in drug discovery

Surface plasmon resonance imaging (SPRi) is a label free technology for biomolecular interaction, which gives access to binding kinetic parameters from real time acquisition. It offers the possibility to test in a single run a large number of interactions, allowing rapid identification of the most suitable compounds toward a given biological entity. Until now, this technique has proven to be relevant for interaction between relatively large molecules (protein, antibodies, DNA) but has not been challenged yet for the screening of small molecules that can be of interested in the field of drug discovery. As a proof a principle, we have used SPRi to screen for interaction of several small molecules, referred to as G4-ligands on G-quadruplex DNA. This technology allowed to easy discrimination of the binding properties of four G4-ligands on quadruplex DNA models.     

The effects of the number of links and navigation support on cognitive load and learning with hypertext: The mediating role of reading order

Problems in learning with hypertext systems have been claimed to be caused by high levels of disorientation and cognitive load. This was recognized by DeStefano and LeFevre [DeStefano, D., & LeFevre, J. -A., (2007). Cognitive load in hypertext reading: A review. Computers in Human Behavior, 23(3), 1616–1641.] who predicted an increase of cognitive load and impairment of learning for hypertexts with a higher number of links per page. From a practical perspective, several navigation support techniques, such as providing link suggestions, have been proposed for guiding learners and reducing cognitive overload. In an experiment, we tested DeStefano and LeFevre’s predictions as well as the usefulness of link suggestions. Participants used different versions of a hypertext, either with 3-links or 8-links per page, presenting link suggestions or not. We tested their cognitive load and learning outcomes. Results showed that there was a benefit of using link suggestions for learning, but no effect of number of links on learning was found. Moreover, the effects of our manipulations on cognitive load were mediated by the reading order that participants selected. Implications for research and the design of navigation support systems are discussed.