Elaboration of Tempranillo wines at two different pHs. Influence on biogenic amine contents

The aim of this work was to study the effect of pH on biogenic amine formation during the elaboration and conservation (7 months) of Tempranillo wines. Grapes at two pHs (3.4 and 3.7) were vinified to achieve this purpose. After alcoholic fermentation the wines were either inoculated with a commercial malolactic starter or not inoculated. Identification and clonal distribution of lactic acid bacteria and amino acid concentration were determined in an attempt to explain the biogenic amine generation. The results showed that the pH of the must influenced the clonal distribution of the Oenococcus oeni strains which conducted the malolactic fermentation and also the concentration of amino acids in the wines after alcoholic fermentation. These aspects could account for the higher biogenic amine formation in wines with the lowest pH during malolactic fermentation. In these wines, inoculation with a malolactic starter was favourable since it produced a lower biogenic amine concentration after malolactic fermentation. Furthermore, the pH also influenced the concentration of amino acids after malolactic fermentation and the lactic acid bacteria distribution during the conservation of the wines. These aspects allow explaining the greater formation of histamine, tyramine and putrescine in the wines with the lowest pH vinified via lactic acid bacteria inoculation after seven months of conservation.     

Oxime Palladacycle‐Catalyzed Suzuki–Miyaura Alkenylation of Aryl,Heteroaryl, Benzyl,and Allyl Chlorides under Microwave Irradiation Conditions

A simple new protocol for the palladium‐catalyzed Suzuki–Miyaura cross‐coupling of organic chlorides under microwave irradiation is presented. Deactivated aryl and heteroaryl chlorides are efficiently cross‐coupled with alkenylboronic acids and potassium alkenyltrifluoroborates using the 4,4′‐dichlorobenzophenone oxime‐derived palladacycle 1b as precatalyst in 0.1 to 0.5 mol% palladium loading, tris(tert‐butyl)phosphonium tetrafluoroborate {[HP(t‐Bu)₃]BF₄} as ligand, tetra‐n‐butylammonium hydroxide as cocatalyst, and potassium carbonate as base in N,N‐dimethylformamide at 130 °C under microwave irradiation conditions. Under these conditions, styrenes, stilbenes, and alkenylarenes are obtained in good to high yields, and with high regio‐ and diastereoselectivities in only 20 min. The reported protocol is also very efficient for the regioselective alkenylation of benzyl and allyl chlorides to afford allylarenes and 1,4‐dienes.     

Cellular Crosstalk between Endothelial and Smooth Muscle Cells in Vascular Wall Remodeling

Pathological vascular wall remodeling refers to the structural and functional changes of the vessel wall that occur in response to injury that eventually leads to cardiovascular disease (CVD). Vessel wall are composed of two major primary cells types, endothelial cells (EC) and vascular smooth muscle cells (VSMCs). The physiological communications between these two cell types (EC–VSMCs) are crucial in the development of the vasculature and in the homeostasis of mature vessels. Moreover, aberrant EC–VSMCs communication has been associated to the promotor of various disease states including vascular wall remodeling. Paracrine regulations by bioactive molecules, communication via direct contact (junctions) or information transfer via extracellular vesicles or extracellular matrix are main crosstalk mechanisms. Identification of the nature of this EC–VSMCs crosstalk may offer strategies to develop new insights for prevention and treatment of disease that curse with vascular remodeling. Here, we will review the molecular mechanisms underlying the interplay between EC and VSMCs. Additionally, we highlight the potential applicable methodologies of the co-culture systems to identify cellular and molecular mechanisms involved in pathological vascular wall remodeling, opening questions about the future research directions.     

Quantum Dot‐Based Thermal Spectroscopy and Imaging of Optically Trapped Microspheres and Single Cells

Laser‐induced thermal effects in optically trapped microspheres and single cells are investigated by quantum dot luminescence thermometry. Thermal spectroscopy has revealed a non‐localized temperature distribution around the trap that extends over tens of micrometers, in agreement with previous theoretical models besides identifying water absorption as the most important heating source. The experimental results of thermal loading at a variety of wavelengths reveal that an optimum trapping wavelength exists for biological applications close to 820 nm. This is corroborated by a simultaneous analysis of the spectral dependence of cellular heating and damage in human lymphocytes during optical trapping. This quantum dot luminescence thermometry demonstrates that optical trapping with 820 nm laser radiation produces minimum intracellular heating, well below the cytotoxic level (43 °C), thus, avoiding cell damage.     

Solution Synthesis of BiFeO3 Thin Films onto Silicon Substrates with Ferroelectric,Magnetic, and Optical Functionalities

Single‐BiFeO₃ perovskite films onto Pt‐coated silicon substrates have been fabricated by chemical solution deposition using a synthesis strategy based on the use of nonhazardous reagents. Different routes were tested to obtain precursors for the deposition of the films, inferring that bismuth (III) nitrate and iron (III) 2,4‐pentanedionate dissolved in acetic acid and 1,3‐propendiol led to the best solution. Ferroelectric, magnetic, and optical functionalities were demonstrated in these films, obtaining a high ferroelectric polarization at room temperature, ~67 μC × cm^?2, a dependence of the magnetization with the film thickness, 0.60 and 2.50 emu × g^?1 for the ~215 and ~42‐nm‐thick films, and a direct band gap in the visible range, E_g ~2.82 eV. These results support the interest of solution methods for the fabrication of BiFeO₃ thin films onto the silicon substrates required in microelectronic devices.     

New copolyesters derived from terephthalic and 2,5-furandicarboxylic acids: A step forward in the development of biobased polyesters

A straightforward partial substitution of non-renewable poly(ethylene terephthalate) by renewable homologous poly(ethylene furandicarboxylate) was successfully done by random copolymerisation of bis(2-hydroxyethyl) terephthalate and bis(hydroxyethyl)-2,5-furandicarboxylate. Different stoichiometric amounts of these monomers were used and the ensuing copolyesters were characterised in detail by several physical chemistry, thermal and mechanical techniques. All copolyesters have the expected chemical structure incorporating both aromatic and furanic units in different amounts accordingly to the stoichiometric feed-ratio. In particular the copolyester having 20% of furan units (PET-ran-PEF 4/1) have similar properties to those of PET homopolyester, despite some minor differences, being a semi-crystalline copolyester with similar glass transition and melting temperatures to those of PET. Also, the mechanical performance of this PET-ran-PEF 4/1 copolyester was in accordance with the PET operating temperature range, tan δ and modulus.     

Characterization and thermal degradation of poly(d,l‐lactide‐co‐glycolide) composites with nanofillers

Chemical and thermal characterization of poly(d ,l ‐lactide‐co‐glycolide) (PLGA) composites filled with hydroxyapatite (HA) or carbon nanotubes (CNT) were evaluated by infrared spectroscopy, differential scanning calorimetry, thermogravimetry, and dynamic–mechanical–thermal analysis. The morphology and distribution of the nanoparticles were studied by transmission electron microscopy. The composites were prepared by solvent casting using 30% HA or 1, 3, and 5% of pristine and functionalized CNT as nanoparticles and PLGA 75:25 and PLGA 50:50 as copolymer matrix. The Coats–Redfern and E₂ function methodologies were used to calculate the reaction order and the activation energy (E_a) of the thermal degradation process. It was found that the addition of nanoparticles increased the glass transition temperature (T_g) of the composites. Also, higher degradation temperatures and E_a values were obtained for PLGA–HA composites and compared with the neat copolymer, and the opposite behavior was exhibited by PLGA–CNT composites. The thermal and mechanical properties were highly dependent on the morphology and dispersion of the filler. The functionalization process of CNT promoted, to some extent, a better distribution and dispersion of CNT into the matrix, and these composites exhibited a slight enhancement on storage modulus. On the other hand, PLGA–HA composites showed a good dispersion but no improvement on the storage modulus below T_g. POLYM. ENG. SCI., 2013. © 2012 Society of Plastics Engineers     

Extracellular Heat Shock Proteins as Therapeutic Targets and Biomarkers in Fibrosing Interstitial Lung Diseases

Interstitial lung diseases (ILDs) include a large number of diseases and causes with variable outcomes often associated with progressive fibrosis. Although each of the individual fibrosing ILDs are rare, collectively, they affect a considerable number of patients, representing a significant burden of disease. Idiopathic pulmonary fibrosis (IPF) is the typical chronic fibrosing ILD associated with progressive decline in lung. Other fibrosing ILDs are often associated with connective tissues diseases, including rheumatoid arthritis-ILD (RA-ILD) and systemic sclerosis-associated ILD (SSc-ILD), or environmental/drug exposure. Given the vast number of progressive fibrosing ILDs and the disparities in clinical patterns and disease features, the course of these diseases is heterogeneous and cannot accurately be predicted for an individual patient. As a consequence, the discovery of novel biomarkers for these types of diseases is a major clinical challenge. Heat shock proteins (HSPs) are molecular chaperons that have been extensively described to be involved in fibrogenesis. Their extracellular forms (eHSPs) have been recently and successfully used as therapeutic targets or circulating biomarkers in cancer. The current review will describe the role of eHSPs in fibrosing ILDs, highlighting the importance of these particular stress proteins to develop new therapeutic strategies and discover potential biomarkers in these diseases.     

Levels of Se,Zn, Mg and Ca in commercial goat and cow milk fermented products: Relationship with their chemical composition and probiotic starter culture

We determined Se, Zn, Mg and Ca levels in 42 samples of goat and cow fermented milks which are widely consumed in Spain were determined. Atomic absorption spectrometry (hydride generation for Se and flame atomisation for remaining elements) was used as an analytical technique. Reliability of the procedure was checked. Only Mg levels in goat fermented milks were significantly higher to those found in cow fermented milks (p < 0.022). Important similarities in concentrations and behaviours for Mg and Ca have been observed. Mg contents were significantly correlated with Zn (r = 0.590; p < 0.001) and Ca (r = 0.344; p < 0.028) concentrations, Zn, Mg and Ca levels with protein content (r = 0.554, r = 0.479, r = 0.388, respectively), Mg levels with fats (r = 0.403; p = 0.011) and Se levels with carbohydrates (r = −0.379; p = 0.031). Mineral and macronutrient levels in yogurts with traditional probiotic starter cultures were not significantly different to those found in fermented milks with additional probiotic microorganisms (p > 0.05). It was concluded that goat fermented milks are a better source for Mg than cow samples.