Photon-assisted tunneling in a carbon nanotube quantum dot

We report on photon-assisted tunneling (PAT) experiments in a carbon nanotube quantum dot using microwave frequencies between 20 and 60 GHz. In addition to the basic PAT effect, revealed by the appearance of two extra resonances in the current through the dot, we use PAT for spectroscopy of excited states. The experimental data are in good agreement with simulations.     

Enhanced Nucleation of Vortices in Soft Magnetic Materials Prepared by Silica Nanosphere Lithography

Magnetic vortices show promise as data storage structures, however the vortex formation process imposes a lower limit on the element’s size. In this article a technique is presented, which application increases the probability of nucleating of magnetic vortices in sub‐micrometer sized soft magnetic thin film elements. By tailoring the edge geometry of the elements, the symmetry of their magnetic configuration is broken in a manner which favors vortex nucleation. Micromagnetic simulations are presented, which demonstrate this effect in soft‐magnetic disks with beveled edges. The favored edge geometry is realized by applying nanosphere lithography directly on top of a ferromagnetic thin film material. In this process, the film is masked with a self assembled monolayer of SiO₂‐nanospheres and subsequently ion‐etched. The resulting magnetic reversal loops show that in both magnetically isolated as well as in closely packed arrays of beveled disks, vortex formation takes place. The technique presented facilitates the vortex formation even in closely packed and small elements. The lowering of the minimum critical diameter for vortex formation enables a significant increase of data storage density in devices based on magnetic vortices.     

Catalytic activity of graphite-based nanofillers on cure reaction of epoxy resins

The strong influence of graphite oxide (GO) nanofiller on the glass transition temperature (T_g) of epoxy resins, generally attributed to restricted molecular mobility of the epoxy matrix by the nanofiller or to the crosslinking of GO layers via the epoxy chains, is investigated. The study confirms that large increases of the glass transition temperature of the nanocomposite can be observed in presence of GO. However, similar T_g increases are observed, when the filler is a high-surface-area graphite (HSAG), lacking oxidized groups. Moreover, these T_g differences tend to disappear as a consequence of aging or thermal annealing. These results suggest that the observed T_g increases are mainly due to a catalytic activity of graphitic layers on the crosslinking reaction between the epoxy resin components (epoxide oligomer and di-amine), rather than to reaction of the epoxide groups with functional groups of GO. This hypothesis is supported by investigating the catalytic activity of graphite-based materials on reactions between analogous monofunctional epoxide and amine compounds.     

动态的遗产策略:文化、经济、历史维度下的荷兰建筑遗产改造实践

动态的遗产策略是应对现代"纪念物悖论"而产生的时代选择。遗产是一个高度可塑的概念,无论概念本身,还是与之相关的保护实践都在不断变化中被讨论、批判和逐步认可。荷兰作为典型宽容社会,面对多元文化的冲击和随之产生的动态身份,针对遗产保护和区域空间规划提出了"通过发展进行保护"的可持续发展理念。本文基于建筑师的立场,从文化、经济、历史三个维度讨论遗产保护改造策略的动态性,结合案例从整体策略和具体方法的层面进行剖析,阐释该种动态的荷兰模式对于历史区域整体性保护的积极影响,为现代遗产改造提供新的思路。     

In vitro activity on human gut bacteria of murta leaf extracts (Ugni molinae turcz.), a native plant from southern Chile

Despite the fact that murta infusions have been used to treat gut/urinary infections by native Chileans for centuries, the mechanisms promoting such effects still remain unclear. As a first attempt to unravel these mechanisms, human fecal samples were incubated in a medium containing water extract of murta leaves (ML) and the growth of different bacterial groups was evaluated. Control incubations were made in media containing fructooligosaccharides (FOS) and glucose as a carbon source. Phenolic compounds in the ML extract, likely promoters of bioactivity, were identified by HPLC-DAD-MS(n) . Concentrations (log(10) CFU/mL) of bifidobacteria and lactobacilli in media containing the extract and FOS were 7.33 ± 0.05/4.95 ± 0.20 and 6.44 ± 0.22/6.05 ± 0.06, respectively. Clostridia, anaerobes and Enterobacteriaceae grew to a similar extent in media containing murta extract and FOS. In vitro tests (disk diffusion) showed that Gram-positive (Bacillus and Paenibacillaceae) and Gram-negative (Enterobacteriaceae) bacteria isolated from fecal samples were sensitive to both water and 50/50 ethanol/water extracts of ML (28.4 μg gallic acid equivalents). At this concentration, the antimicrobial activity of ML extracts was significantly (P < 0.05) lower than that of penicillin (10 U), whereas the difference between activity of ML extracts and gentamicine (10 μg) was no significant (P > 0.05). No evidence of dependency between the antimicrobial activity of ML extracts and the enzymatic capability of the sensitive strains was found.     

Acceptability and nutritional quality of a beverage based on orange juice and whey powder, preserved by heat or high-intensity pulsed electric fields (HIPEF)

Orange juice may be a nutrient vehicle that helps to improve diet quality. The addition of whey allows the incorporation of high quality proteins. However, a good acceptability is necessary. The aims of the present study were: a) to assess the acceptability of a beverage prepared with orange juice (J) and whey powder (WP) at 7 g/100 g (J+WP7) or at 13 g/100 g (J+WP13); b) to measure available lysine content and ascorbic acid retention of the more accepted formulation, comparing the effect of HIPEF treatment (29 kV/cm, t(acum): 59 micros) with a conventional heat treatment at 75 degrees C, for 15 minutes (HT). The beverages were subjected to sensory evaluation (Friedman test). Available lysine was assessed by the Carpenter method, modified by Booth, and vitamin C by HPLC; minerals Na and K, by flame photometry; Ca, Mg and Zn by atomic absorption spectrometry. There were no significant differences between the acceptance of J and J+WP7. J+WP13 was significantly less accepted (p < 0.01), so it was discarded. Available lysine (mg/g protein) in untreated J+WP7 was 60.2 +/- 0.15; after treatments: 50.0 +/- 2.8 (HT) and 51.0 +/- 3.4 (HIPEF). The HIPEF treated J and (J+WP7) retained 100% and 98% of their vitamin C initial content and the HT treated, 91% and 88%, respectively. The amount of whey powder added to the orange juice conditioned the acceptability. The juice containing 7% of whey powder was well accepted, and after treatment by HIPEF, it retained a good nutritional quality, regarding available lysine, vitamin C retention and provision of mineral nutrients.     

Natural fluctuations of mercury and lead in Greenland lake sediments

Given the current scenario of increasing global temperatures, it is valuable to assess the potential influence of changing climate on pollution distribution and deposition. In this study we use long-term sediment records from three lakes (spanning ca. 1000, 4800, and 8000 years, respectively) from the Greenland west coast to assess recent and long-term variations in mercury (Hg) and lead (Pb), including stable Pb isotopes (206Pb and 207Pb), in terms of pollution and climate influences. The temporal trends in sediment deposited from about the mid-19th century and forward are in general agreement with the history of industrial emissions at lower latitudes. Therefore, in recent sediment a possible influence from changing climate is difficult to assess. However, by using deeper sediment layers we show that changes in Greenland climate caused changes in the lake influx of material from regional aeolian activity, which resulted in large fluctuations in Hg and Pb concentrations and 206Pb/207Pb ratios. The aeolian material is primarily derived from glacio-fluvial material with low Hg and Pb concentrations and a different isotopic composition. For one of the lakes, the fluctuations in Hg concentrations (10 to 70 ng g(-1)) prior to the 19th century are equal to the anthropogenic increase in the uppermost layers, suggesting that when studying recent concentrations and time trends of pollution in relatively low-contaminated areas such as the Arctic, the early natural fluctuations must be considered.     

From Meso to Macro: Controlling Hierarchical Porosity in Supraparticle Powders

A drying droplet containing colloidal particles can consolidate into a spherical assembly called a supraparticle. Such supraparticles are inherently porous due to the spaces between the constituent primary particles. Here, the emergent, hierarchical porosity in spray-dried supraparticles is tailored via three distinct strategies acting at different length scales. First, mesopores (<10 nm) are introduced via the primary particles. Second, the interstitial pores are tuned from the meso- (35 nm) to the macro scale (250 nm) by controlling the primary particle size. Third, defined macropores (>100 nm) are introduced via templating polymer particles, which can be selectively removed by calcination. Combining all three strategies creates hierarchical supraparticles with fully tailored pore size distributions. Moreover, another level of the hierarchy is added by fabricating supra-supraparticles, using the supraparticles themselves as building blocks, which provide additional pores with micrometer dimensions. The interconnectivity of the pore networks within all supraparticle types is investigated via detailed textural and tomographic analysis. This work provides a versatile toolbox for designing porous materials with precisely tunable, hierarchical porosity from the meso- (3 nm) to the macroscale (≈10 µm) that can be utilized for applications in catalysis, chromatography, or adsorption.     

Lead-Free,Luminescent Perovskite Nanocrystals Obtained through Ambient Condition Synthesis

Heterovalently substituting toxic lead is an increasingly popular design strategy to obtain environmentally sustainable variants of the exciting material class of halide perovskites. Perovskite nanocrystals (NCs) obtained through solution-based methods exhibit exceedingly high optical quality. Unfortunately, most of these synthesis routes still require reaction under inert gas and at very high temperatures. Herein a novel synthesis routine for lead-free double perovskite (LFDP) NCs is presented. An approach based upon the hot injection and ligand-assisted reprecipitation (LARP) methods to achieve a low-temperature and ambient atmosphere-based synthesis for manganese-doped Cs₂NaBiCl₆ NCs is presented. Mn incorporation is critical for the otherwise non-emissive material, with a 9:1 Bi:Mn precursor ratio maximizing the bright orange photoluminescence (PL) and quantum yield (QY). Higher synthesis temperatures slightly increase the material's performance, yet NCs synthesized at room temperature are still emissive, highlighting the versatility of the synthetic approach. While the material's indirect bandgap limits its appeal for optoelectronics, this feature could benefit photocatalysis due to longer carrier lifetimes. Moreover, the developed synthesis is facile and can rapidly be adapted to other more viable material compositions and up-scaled to realize applications directly.