Mössbauer studies of iron-bearing minerals in coal and coal ash

⁵⁷Fe Mössbauer spectroscopy has been used to characterize the iron-bearing minerals present in some British Columbia coals. The minerals observed in a range of samples include pyrite/marcasite, siderite, jarosite, rozenite or melanterite, and Fe²⁺ -bearing clay minerals such as illite. The presence of jarosite is confirmed through the magnetic hyperfine interaction observed at 4.2 K. The absence of magnetic ordering at 4.2 K for the ferrous sulphate component indicates the presence of rozenite, FeS0₄ · 4H₂0, or melanterite, FeS0₄ · 7H₂0, rather than szomolnokite, FeS0₄ · H₂0 or FeS0₄. The effects of ashing on two of the coals is also studied.     

Quantitative X-ray powder diffraction analysis of clay minerals in Australian coals using Rietveld methods

The mineralogy of clay-rich mineral matter isolated from a range of Australian bituminous coals has been evaluated in quantitative terms from X-ray powder diffraction (XRD) patterns using a Rietveld-based data processing technique. The chemical composition of coal ash derived from this mineral matter has been calculated and compared to the directly determined composition of the ash prepared from the same coal samples. Although there are some minor differences due in part to uncertainty regarding the actual composition of several minerals, the compositions indicated by the two methods show a relatively high correlation, suggesting that the Rietveld technique provides mineralogical analyses that are consistent with independently determined chemical data. Comparison of the normalised clay mineral percentages from the Rietveld analysis to quantitative interpretations based on a peak intensities in glycolated and heat-treated oriented aggregates of the respective clay fractions also shows a high correlation, confirming mutual consistency of the two different mineralogical analysis methods. Such quantitative mineralogical data are significant to a range of coal exploration, mining and utilization activities, including seam correlation, material handling and ash and slag formation in combustion processes.     

Determination of glass content and estimation of glass composition in fly ash using quantitative X-ray diffractometry

The proportion of amorphous or glassy material in a series of fly ashes has been evaluated by X-ray powder diffraction (XRD) using the Rietveld-based SIROQUANT software package. Several different sample preparation and processing methods were investigated, including XRD analysis of samples spiked with known masses of synthetic corundum and zinc oxide as well as techniques based on analysing the raw or unspiked fly ash directly using the SIROQUANT process. In the latter case, two different poorly crystallised silicate mineral patterns, metakaolin and tridymite, were used in the SIROQUANT processing of the raw ash XRD data to represent the amorphous constituents. The results of the different methods based on XRD of spiked samples were found to be mutually consistent, and also consistent with other published data for an international reference fly ash sample. SIROQUANT analysis of the unspiked fly ashes gave similar results, although different poorly crystallised silicate reference patterns seem to be more suited for ashes from Australian and North American sources.The mineralogy of the ashes, including the proportions of quartz, iron oxide and glassy constituents, appears to be related to the nature of the mineral matter in the relevant feed coals. Calculations based on subtracting the inferred chemistry of the crystalline minerals in the fly ashes from the total fly ash chemistry were also used to estimate the overall chemical composition of the glass fraction in each ash. The results indicate that ashes derived from lower-rank coals in the samples studied have different glass compositions to those derived from higher-rank (bituminous) materials. These different glass compositions appear to be related to several other ash properties, including particle density and particle surface area. Evaluation of glass content and composition may be significant in different aspects of ash utilisation, and also in evaluating interactions with water at ash disposal sites.     

The effects of Cl-induced alloying in Pt–Sn/Al2O3 catalysts on butane/H2 reactions

The effects of oxidation/reduction regeneration treatments, with and without 1,2-dichloropropane present as a chlorinating agent, on the structure of Pt(3%)–Sn(4.5%)/Al₂O₃ catalysts have been correlated with selectivities for butane/H₂ reactions. Particles of Pt⁰ fin Cl-free catalysts were partly covered by Sn⁰, but retained exposed ensembles of Pt atoms which were active for isomerisation, hydrogenolysis and dehydrogenation reactions, the latter becoming dominant at high reaction temperatures. Coking reduced Pt ensemble size and, hence, also favoured high selectivities for dehydrogenation as hydrogenolysis and isomerisation sites became poisoned. In contrast, the addition of 1,2-dichloropropane in an oxychlorination step before reduction promoted 1:1 Pt⁰–Sn⁰ alloy formation after reduction, the proportion of the total Pt in alloy being enhanced by increasing 1,2-dichloropropane concentration and oxychlorination temperature. The alloy surfaces were inactive for isomerisation and hydrogenolysis reactions, giving dehydrogenation as the sole catalytic reaction.     

HDPE/LLDPE reactor blends with bimodal microstructures—Part II: rheological properties

Reactor blends of polyethylene/poly(ethylene-co-1-octene) resins with bimodal molecular weight and bimodal short chain branching distributions were synthesized in a two-step polymerization process. The compositions of these blends range from low molecular weight (LMW) homopolymer to high molecular weight (HMW) copolymer and vice versa HMW homopolymer to LMW copolymer. The shear flow characteristics of these polymers in the typical processing range mostly depend on the molecular weight and MWD of the polymer and are independent of the short chain branch content. From oscillatory shear measurements, it was observed that the viscosity of HMW polymers was reduced with the addition of LMW material. For the polymers produced with this two-step polymerization process, the LMW homopolymer and HMW copolymer blends and HMW homopolymer and LMW copolymer blends were melt miscible, despite the large viscosity differences of the pure components.     

Test-data generation for control coverage by proof

Many tools can check if a test set provides control coverage; they are, however, of little or no help when coverage is not achieved and the test set needs to be completed. In this paper, we describe how a formal characterisation of a coverage criterion can be used to generate test data; we present a procedure based on traditional programming techniques like normalisation, and weakest precondition calculation. It is a basis for automation using an algebraic theorem prover. In the worst situation, if automation fails to produce a specific test, we are left with a specification of the compliant test sets. Many approaches to model-based testing rely on formal models of a system under test. Our work, on the other hand, is not concerned with the use of abstract models for testing, but with coverage based on the text of programs.     

A Fourier-transform infrared study of CO2 and CO2/H2 interactions with caesium-doped copper catalysts

FTIR spectra are reported of CO₂ and CO₂/H₂ on a silica-supported caesium-doped copper catalyst. Adsorption of CO₂ on a “caesium”/silica surface resulted in the formation of CO₂ ⁻ and complexed CO species. Exposure of CO₂ to a caesium-doped reduced copper catalyst produced not only these species but also two forms of adsorbed carboxylate giving bands at 1550, 1510, 1365 and 1345 cm⁻¹. Reaction of carboxylate species with hydrogen at 388 K gave formate species on copper and caesium oxide in addition to methoxy groups associated with caesium oxide. Methoxy species were not detected on undoped copper catalyst suggesting that caesium may be a promoter for the methanol synthesis reaction. Methanol decomposition on a caesium-doped copper catalyst produced a small number of formate species on copper and caesium oxide. Methoxy groups on caesium oxide decomposed to CO and H₂, and subsequent reaction between CO and adsorbed oxygen resulted in carboxylate formation. Methoxy species located at interfacial sites appeared to exhibit unusual adsorption properties.     

Occurrence of wax esters in the tissues of the organge roughy (Hoplostethus atlanticus)

The skin, skeleton and a fat-filled swim bladder of the orange roughy (Hoplostethus atlanticus) each contained greater than 20% lipid by wet weight which was almost entirely wax esters. These had carbon numbers of 34–40 consistent with the major fatty acid being 18∶1 and the major fatty alcohols being 16∶0, 18∶1, 20∶1 and 22∶1. In contrast, the liver and the roe contained appreciable quantities of glycerolipids with 18∶1 and 22∶6 as the major fatty acids.     

Responses of the Aphids Phorodon humuli and Rhopalosiphum padi to Sex Pheromone Stereochemistry in the Field

Gynoparous female and male damson-hop aphids, Phorodon humuli (Schrank), were caught in the field by water traps that were releasing the sex pheromone of this species, (1RS,4aR,7S,7aS)-nepetalactol. No behavioral activity was elicited by (4aS,7S,7aR)-nepetalactone, the major sex pheromone component of other aphid species such as Megoura viciae Buckton, even though olfactory cells were found in the secondary rhinaria on the third antennal segment of P. humuli that responded strongly to this compound. Gynoparous female P. humuli in the field responded less strongly to (1R,4aS,7S,7aR)-nepetalactol, the sex pheromone of the bird cherry-oat aphid, Rhopalosiphum padi (L.), than they did to the (4aR,7S,7aS)-nepetalactols, but males responded only to the latter. The (4aR,7S,7aS)-nepetalactone showed no electrophysiological activity so was not used in field trials. Releasing either the (4aS,7S,7aR)-nepetalactone or the (1R,4aS,7S,7aR)-nepetalactol with the (4aR,7S,7aS)-nepetalactols did not inhibit the response of P. humuli gynoparous females and males to the latter. Males of R. padi responded as strongly to the (4aR,7S,7aS)-nepetalactols as they did to (1R,4aS,7S,7aR)-nepetalactol. Males of P. humuli and R. padi responded positively to an increased concentration of the (4aR,7S,7aS)-nepetalactols released from two vials compared with that from a single vial, as did P. humuli (in one of two experiments) and R. padi to the (1RS,4aR,7S,7aS)- and (1R,4aS,7S,7aR)-nepetalactols when released together.     

Biochemical activities during lipid accumulation inCandida curvata

Intracellular and extracellular concentrations of citrate and the specific activities of ten different enzymes in Candida curvata D were examined in relation to lipid biosynthesis in batch and continuous culture. Citrate was found to accumulate prior to lipid production and declined markedly as lipid accumulated in batch culture. The cells excreted citrate as the culture became nitrogen-limiting after 30 hr of growth, but little more was expelled after 40 hr when lipid accumulation was more marked. In continuous culture, only low levels of citrate were detected at the lower dilution rates and citrate was completely absent from both the cells and medium above a dilution rate of 0.1/hr. The activity of malic enzyme, malate dehydrogenase and ATP:citrate lyase increased in batch culture on lipid accumulated and, in continuous culture, both malic enzyme and ATP:citrate lyase varied in parallel with the specific rate of lipid synthesis which increased with increasing dilution rate. Activity of malate dehydrogenase, citrate synthase and glucose-6-phosphate dehydrogenase decreased with increasing dilution rate. The regulatory significance of these enzymes in lipid accumulation by C. curvata is discussed.