Characterization of Thai limestone for desulphurization in a fluidized bed combustor

The objective of this study is to determine the chemical kinetics of desulphurization of Thai limestone in an atmospheric fluidized bed combustor (AFBC). The experiments, which employed the batch technique using the limestone samples from six major sources in Thailand, were performed in a laboratory‐scale AFBC. The results obtained were analysed and correlated in the form of apparent reaction rate and deactivation rate constants as a function of operating conditions of the furnace and their properties, respectively. The formulae derived from these correlations were kept as general as possible in order that they could be used as input parameters for the selected mathematical model of desulphurization in an AFBC that is suitable for practical use. The predicted results were in good agreement with the experimental data reported in the literature. Copyright © 2003 John Wiley & Sons, Ltd.     

利用废硅胶生产五水偏硅酸钠的研究

概述了五水偏硅酸钠的市场现状,介绍了以废硅胶为原料生产五水偏硅酸钠的实验方法。通过实验,得出了优化实验条件为:模数采用0.5~0.8,波美度在35~50°,加热废硅胶及浓缩结晶的温度为90~100℃,时间为持续沸腾5min以上,采用自然降温法,时间在10h左右。最终制得良好的晶体,其中氧化钠含量为28.5%,氧化硅含量27.3%,产品质量达到国内同类产品的一级品标准。     

The Fabrication and Characterization of Single‐Component Polymeric White‐Light‐Emitting Diodes

By using Ni⁰‐mediated polymerization, we have systematically synthesized a series of fluorene‐based copolymers composed of blue‐, green‐, and red‐light‐emitting comonomers with a view to producing polymers with white‐light emission. 2,7‐Dibromo‐9,9‐dihexylfluorene, {4‐(2‐[2,5‐dibromo‐4‐{2‐(4‐diphenylamino‐phenyl)‐vinyl}‐phenyl]‐vinyl)‐phenyl}‐diphenylamine (DTPA), and 2‐{2‐(2‐[4‐{bis(4‐bromo‐phenyl)amino}‐phenyl]‐vinyl)‐6‐tert‐butyl‐pyran‐4‐ylidene}‐malononitrile (TPDCM) were used as the blue‐, green‐, and red‐light‐emitting comonomers, respectively. It was found that the emission spectra of the resulting copolymers could easily be tuned by varying their DTPA and TPDCM content. Thus with the appropriate red/green/blue (RGB) unit ratio, we were able to obtain white‐light emission from these copolymers. A white‐light‐emitting diode using the polyfluorene copolymer containing 3 % green‐emitting DTPA and 2 % red‐emitting TPDCM (PG3R2) with a structure of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonic acid)/PG3R2/Ca/Al was found to exhibit a maximum brightness of 820 cd m^–2 at 11 V with Commission Internationale de L'Eclairage (CIE) coordinates of (0.33,0.35), which are close to the standard CIE coordinates for white‐light emission (0.33,0.33).     

Neighborhood disadvantage moderates associations of parenting and older sibling problem attitudes and behavior with conduct disorders in African American children.

Data from 296 sibling pairs (mean ages 10 and 13 years), their primary caregivers, and census records were used to test the hypothesis that African American children's likelihood of developing conduct problems associated with harsh parenting, a lack of nurturant-involved parenting, and exposure to an older sibling's deviance-prone attitudes and behavior would be amplified among families residing in disadvantaged neighborhoods. A latent construct representing harsh-inconsistent parenting and low levels of nurturant-involved parenting was positively associated with younger siblings' conduct disorder symptoms, as were older siblings' problematic attitudes and behavior. These associations were strongest among families residing in the most disadvantaged neighborhoods. Future research and prevention programs should focus on the specific neighborhood processes associated with increased vulnerability for behavior problems. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Manufacturing and structural safety evaluation of a composite train carbody

This paper explains the manufacturing process of a composite train carbody with a sandwich composite structure for bodyshell and a stainless steel structure for the under frame. In addition, the structural behavior and safety of the composite carbody of the Korean tilting train was investigated by the static load tests. From the test results, the stiffness of the composite carbody met the specified design. In the aspect of strength, the maximum stress of the composite bodyshell was of 12.2% of strength of CF1263 carbon/epoxy.     

电信建筑在岩溶发育地区的地基基础设计

结合新密电信综合生产楼工程和贵阳第二长途电信枢纽楼工程的设计，介绍在岩溶发育场地上，对浅层岩溶地基的处理方法及基础类型的选择思路。     

Hierarchically Ordered Polymer Films by Templated Organization of Aqueous Droplets

Hierarchically ordered structures facilitate the incorporation of diverse functions simultaneously. The present report introduces a simple and novel strategy for producing hierarchically ordered polymeric films. Hierarchical ordering of aqueous droplets on a polymer solution is realized by the imposition of physical confinement via various shaped gratings. After drying of the solution, well‐ordered hierarchical structures were fabricated in the remaining polymer film. The size of the grating structure and the lattice size of spontaneous hexagonally packed aqueous pores comprise two different length scales, thereby offering multiscale ordering. Interfacial wetting of the polymer solution to the grating surface was crucial in terms of obtaining a highly ordered structure that can be tuned by dissolving a small amount of surfactant in the polymer solution. The present novel approach provides a new opportunity for lithography‐free fabrication of complex hierarchical structures.     

Effects of alloying elements on fracture toughness in the transition temperature region of base metals and simulated heat-affected zones of Mn-Mo-Ni low-alloy steels

This study is concerned with the effects of alloying elements on fracture toughness in the transition temperature region of base metals and heat-affected zones (HAZs) of Mn-Mo-Ni low-alloy steels. Three kinds of steels whose compositions were varied from the composition specification of SA 508 steel (grade 3) were fabricated by vacuum-induction melting and heat treatment, and their fracture toughness was examined using an ASTM E1921 standard test method. In the steels that have decreased C and increased Mo and Ni content, the number of fine M₂C carbides was greatly increased and the number of coarse M₃C carbides was decreased, thereby leading to the simultaneous improvement of tensile properties and fracture toughness. Brittle martensite-austenite (M-A) constituents were also formed in these steels during cooling, but did not deteriorate fracture toughness because they were decomposed to ferrite and fine carbides after tempering. Their simulated HAZs also had sufficient impact toughness after postweld heat treatment. These findings indicated that the reduction in C content to inhibit the formation of coarse cementite and to improve toughness and the increase in Mo and Ni to prevent the reduction in hardenability and to precipitate fine M₂C carbides were useful ways to improve simultaneously the tensile and fracture properties of the HAZs as well as the base metals.