Carboxylation of epoxides to beta-keto acids in cell extracts of Xanthobacter strain Py2

A novel enzymatic reaction involved in the metabolism of aliphatic epoxides by Xanthobacter strain Py2 is described. Cell extracts catalyzed the CO2-dependent carboxylation of propylene oxide (epoxypropane) to form acetoacetate and beta-hydroxybutyrate. The time courses of acetoacetate and beta-hydroxybutyrate formaton indicate that acetoacetate is the primary product of propylene oxide carboxylation and that beta-hydroxybutyrate is a secondary product formed by the reduction of acetoacetate. Analogous C5 carboxylation products were identified with 1,2-epoxybutane as the substrate. In the absence of CO2, propylene oxide and 1,2-epoxybutane were isomerized to form acetone and methyl ethyl ketone, respectively, as dead-end products. The carboxylation of short-chain epoxides to beta-keto acids is proposed to serve as the physiological reaction for the metabolism of aliphatic epoxides in Xanthobacter strain Py2.     

A review of robust design methods for multiple responses

Problems in engineering design often involve determining design variable settings to optimize individual product performance for multiple criteria, which are often in conflict. We review mathematically rigorous techniques from the statistical literature for finding a vector x of design variable settings, which produces an optimal compromise solution among a group of prioritized response variables. The best compromise solution is typically gained by optimizing an objective function, which incorporates the prioritized demands of multiple responses. Since most multi-response objective functions are constructed by combining the functions used to optimize univariate responses, a review of the prominent univariate approaches is presented first. A multivariate approach from the engineering literature called the compromise Decision Support Problem is also reviewed. Finally a table comparing the relative merits of the different multivariate approaches summarizes the article in a concise and user-friendly fashion.     

Development and simulation studies of an unsteady state biofilter model for the treatment of cyclic air emissions of an α‐pinene gas stream

This paper describes the development and simulation of an unsteady state biofilter model used to predict dynamic behaviour of cyclically‐operated biofilters and compares it with experimental results obtained from three, parallel, bench‐scale biofilters treating both periodically fluctuating concentrations and constant concentrations of an α‐pinene‐laden gas stream. The dynamic model, using kinetic parameters estimated from the constant concentration biofilter, was able to predict the performance of cyclic biofilters operating at short cycle periods (ie, in the order of minutes and hours). Steady state kinetic data from a constant concentration biofilter can be used to predict unsteady state biofilter operation. At a 24 h cycle period, the dynamic model compared well with experimental results. For long cycle periods (ie, hours and days), removal efficiency decreased after periods of non‐loading: the longer the period of non‐loading, the poorer the biofilter's performance at the re‐commencement of pollutant loading. At longer time scales the model did not effectively predict transient behaviour, as adsorption and changes in kinetic parameters were not accounted for. Modelling results showed that similar biofiltration performance for the cyclic and constant concentration biofiltration of α‐pinene is expected for biofilters operating solely in the first order kinetics regime. Poorer performance for cyclic biofilters following Monod kinetics spanning the entire kinetics range is expected as the cycle amplitude increases. The most important parameters affecting the performance of a cyclically‐operated biofilter with short cycle periods are: amplitude of cyclic fluctuations, C_{g, max}/C_g, relative value of the half‐saturation constant in the Monod expression, K_s, and effective diffusivity of α‐pinene in the biofilm, D_e. Copyright © 2005 Society of Chemical Industry     

Fabrication of high current and low profile micromachined inductorwith laminated Ni/Fe core

A new process for the fabrication of high current and very low profile micromachined inductors has been developed. This process involves the combination of mechanical lamination and electrodeposition of copper windings by means of LIGA-like lithography through thick epoxy photoresists. The dimension of the fabricated inductor is 16 mm×19 mm×1 mm. The fabricated inductor has an inductance value of 1.2 μH with DC saturation current of 3 A and an electrical resistance of less than 30 mΩ at 10 kHz     

The concept of an endurance limit for adhesive joints

The effect of cyclic stressing on the strength of single lap adhesive joints has been studied and a considerable reduction in strength observed when the maximum stress exceeds about 40% of the ultimate tensile strength, but whether or not a true endurance limit exists is not proven. Fallacies are shown in some of the techniques which have been proposed for studying the fatigue behaviour of adhesive joints.     

Profile dependence and measurement of absolute Raman scattering cross-section in optical fibres

A simple measurement method for the absolute Raman scattering cross-section of an optical fibre is presented. This method does not require a high power pump laser and it measures the fibre directly. It is also shown that the calculation of the cross-section depends on the fibre structure, such as its refractive index profile and the differential attenuation between the pump wavelength and Raman wavelength.<>     

Family-Responsive Interventions, Perceived Organizational and Supervisor Support, Work-Family Conflict, and Psychological Strain.

This study examined organizational family-responsive policies, perceptions of the organization as family supportive, and supervisor support as issues that may be salient to the experience of conflict between paid employment (work) and family roles. Data were collected from 355 managerial personnel in New Zealand. Although work-family conflict and psychological strain were strongly linked, the availability of organizational policies had no significant association with levels of conflict or strain, whereas policy usage was related only to work-to-family interference and not to family-to-work interference. On the other hand, perceptions of the organization as family supportive and supervisor support for work-family balance displayed significant relationships with key variables, highlighting the importance of these variables for interventions designed to ameliorate the negative impact of work-family conflict on managerial well-being. Implications for the effective implementation of family-responsive interventions are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Hemispheric contributions to nonverbal abstract reasoning and problem solving.

Hemispheric involvement in reasoning abilities has been debated for some time, and it remains unclear whether the right hemisphere's involvement in problem solving is modality specific or dependent on the type of spatial reasoning required. In the current study, 2 types of nonverbal reasoning abilities were examined, spatial reasoning and proportional reasoning, in 109 patients with cerebrovascular disease that was confined to either the right or the left hemisphere or was diffuse in nature. Results indicated that no lateralizing effects were present based on type of spatial reasoning. Findings are consistent with the suggestion that higher order cognitive processes involved in nonverbal abstraction and problem solving are not strongly lateralized to the right hemisphere but rather are more generally distributed throughout the cortex. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Enhanced performance feedback to strengthen biofeedback treatment outcome with childhood migraine

The activity of rifabutin (LM 427) against Mycobacterium leprae was evaluated in armadillos inoculated earlier with human-derived M. leprae. Rifabutin was administered daily at a dose of 6 mg/kg body weight/day. The effect of rifabutin on M. leprae harvested from armadillos was determined by measuring the intracellular levels of ATP (an indicator of metabolic activity) of M. leprae and also their ability to multiply in the mouse footpads and in vitro in DH medium. Within 2 weeks of initiating the treatment, ATP levels declined to 21% of the original (pre-treatment level) and these M. leprae failed to multiply in the footpads of mice as well as in the in vitro culture system. This suggests that rifabutin was able to kill all M. leprae within 2 weeks. After 8 weeks the treatment was terminated and results showed that M. leprae from the treated armadillos remained non-viable in the mouse footpad system as well as in the in vitro system, indicating bactericidal action of rifabutin. The results suggest that rifabutin can be a substitute for rifampin in the leprosy multi-drug therapy regimen.