Electrolyte and solvent effects of electrocoated polycarbazole thin films on carbon fiber microelectrodes

Carbazole was electrochemically synthesized on carbon fiber microelectrodes (CFMEs) in different electrolyte and solvent media. The characterization of polycarbazole thin films formed on micron sized carbon fiber electrodes was performed by electrochemical methods (i.e., cyclic voltammetric measurements, solid state conductivity measurements (four point probe), spectrophotometric methods (ultraviolet/visible spectroscopy (UV–vis), ex situ spectroelectrochemistry, fourier transform infrared reflectance spectroscopy (FTIR-ATR)) and scanning electron microscopy (SEM). The best electrolyte and solvent in regards to yield, conductivity and charge for the electro-grafting was sodium perchlorate in acetonitrile, whose conductivity was 3.60 mS cm⁻¹, had a yield of 89% and had a charge of 5.50C. The effects of scan rate, feed ratio, supporting electrolyte and solvent type on the electropolymerization are discussed.     

Characteristics of brick used as aggregate in historic brick-lime mortars and plasters

Mortars and plasters composed of a mixture of brick powder and lime have been used since ancient times due to their hydraulic properties. In this study, raw material compositions, basic physical, mineralogical, microstructural and hydraulic properties of some historic Ottoman Bath brick-lime mortars and plasters were determined by XRD, SEM-EDS, AFM, TGA and chemical analyses. The mineralogical and chemical compositions, microstructures, morphologies and pozzolanicities of the brick powders and fragments used as aggregates in the mortars and plasters were examined to find out the relationship between hydraulic properties of the mortars and the bricks. The characteristics of bricks used in the bath domes were also determined to investigate whether the brick aggregates used in mortar and plasters were prepared from these bricks. The results indicated that the mortars and plasters were hydraulic owing to the presence of crushed brick powders that have good pozzolanicity. The brick powders had high pozzolanicity because they contained high amounts of calcium-poor clay minerals in their raw materials that were fired at low temperatures. On the other hand, bricks used in the domes had poor pozzolanicity with different mineralogical and chemical compositions from bricks used in mortars and plasters. Based on the results of the analysis, it was thought that the bricks manufactured with high amounts of clays were consciously chosen in the preparation of hydraulic mortars and plasters.     

In situ image processing capabilities of ARM-based micro-controllers

Dealing with visual data is the key for environmental monitoring tasks in Wireless Multimedia Sensor Networks (WMSNs). Tasks such as object detection, recognition, and/or tracking do require extracting and using the right information from the inherently large amount of visual data. The widely accepted solution of legacy WSNs, transmitting the acquired data to a central base station for further processing, would render a WMSN totally useless because of the unacceptable use of bandwidth and energy. Therefore, we consider the in situ processing as a viable solution for WMSNs. However, processing power and memory capacity restrictions of existing multimedia sensor nodes along with their power consumption are the limiting factors for wide-spread use of in situ processing. Nevertheless, recent technological improvements and introduction of the new ARM cores encourage us to evaluate the image processing capabilities of ARM7/ARM9/ARM11 based micro-controllers for in situ processing in WMSNs. In this work, we first discussed the architectural design differences among the various ARM cores. Then we classified image processing algorithms into three categories. Then, we evaluated the performance of each microcontroller by running a set of basic image processing algorithms necessary for object detection, recognition, and/or tracking. The test results show that ARM11 runs up to 6–30 times faster than ARM9 and ARM7, respectively. Besides, ARM11 consumes up to 5–7 times less energy than ARM9 and ARM7 for the same type of operations.     

Utilization of Catalytic Properties of the Encapsulated Lipase with Calix[4]arene-Adorned Sporopollenin

The dihydrazide calix[4]arene was immobilized onto sporopollenin in order to encapsulate Candida rugosa lipase (CRL) via sol-gel entrapment. The kinetic resolution of the new encapsulated lipase was investigated for enantioselective hydrolysis of racemic naproxen methyl ester and 2-phenoxypropionic acid methyl ester. The results demonstrated that the activity and enantioselectivity of the lipase were improved when the lipase was encapsulated in the presence of calix[4]arene-immobilized sporopollenin. The encapsulated lipase showed an excellent rate of enantioselectivity against the (R/S)-naproxen methyl and (R/S)-2-phenoxypropionic acid methyl esters, with E = 350 and 295, respectively, compared to the free enzyme.     

Vibrational Energy Transport in Hybrid Ordered/Disordered Nanocomposites: Hybridization and Avoided Crossings of Localized and Delocalized Modes

Vibrational energy transport in disordered media is of fundamental importance to several fields spanning from sustainable energy to biomedicine to thermal management. This work investigates hybrid ordered/disordered nanocomposites that consist of crystalline membranes decorated by regularly patterned disordered regions formed by ion beam irradiation. The presence of the disordered regions results in reduced thermal conductivity, rendering these systems of interest for use as nanostructured thermoelectrics and thermal device components, yet their vibrational properties are not well understood. Here, the mechanism of vibrational transport and the reason underlying the observed reduction is established in detail. The hybrid systems are found to exhibit glass‐crystal duality in vibrational transport. Lattice dynamics reveals substantial hybridization between the localized and delocalized modes, which induces avoided crossings and harmonic broadening in the dispersion. Allen/Feldman theory shows that the hybridization and avoided crossings are the dominant drivers of the reduction. Anharmonic scattering is also enhanced in the patterned nanocomposites, further contributing to the reduction. The systems exhibit features reminiscent of both nanophononic materials and locally resonant nanophononic metamaterials, but operate in a manner distinct to both. These findings indicate that such “patterned disorder” can be a promising strategy to tailor vibrational transport through hybrid nanostructures.     

Processing‐structure‐property relationship in rigid polyurethane foams

Rigid polyurethane (PU) foam is used as a thermal insulating and supporting material in domestic refrigerator/freezers and it is produced by reaction injection molding (RIM) process. There is a need to improve the thermal property of rigid PU foam but this is still a challenging problem. Accordingly, this work investigates the RIM process parameters to evaluate their effects on rigid PU foam's structure and hence property. It has been found that mold temperature is a key parameter whereas curing time has negligible effect on structure of PU foam. Cell size, strut thickness, and foam density have been found very critical in controlling the thermal and mechanical properties. Upper and lower values of 30 to 32 kg/m³ density are critical to observe contribution of radiation and solid conductivity separately. Finally, PU foam with 160 µm average cell size, 16 µm strut thickness, below 10% open cell content, and 30 to 32 kg/m³ density allow obtaining better thermal insulation without significant reducing in the compressive strength. The presented work provides a better understanding of processing‐structure‐property relationship to gain knowledge on producing high‐quality rigid PU foams with improved properties. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44870.     

Research, protection and restoration studies on the historical fabric of Isparta, using Aya Baniya Church as an example

Turkey is a country that bears the tracks of many civilizations because of its geographic location and its characteristics that come from its deeply rooted history. So it contains historical and cultural items of value that are quite rich and can be characterized as intensely universal. Thanks to these valuable items, it has always drawn the attention of the world. Isparta is a city that houses quite a few historical, archaeological and cultural items of value in its structure. Protecting the historical buildings that carry the cultural and historical traces of a period and making a contribution to its reuse for the future of all humanity are a truth of international importance. In this connection, with this study, essential work was carried out and certain suggestions made about St. Baniya Church, which is one of the most important structures of the historically, archaeologically and culturally valuable items that make up the historical fabric of Isparta and especially, the historical and cultural potential of Isparta.     

Investigation of mean glandular dose versus compressed breast thickness relationship for mammography

The relationship between the mean glandular dose (MGD) and the compressed breast thickness (CBT) is commonly used for the presentation of mammographic dose survey results and could also be useful for the assessment of individual breast doses retrospectively in case of lack of necessary dosimetric instrumentation. The high data scattering from the best fit reduces the reliability of this technique. The aim of this study was to investigate the accuracy of this relationship using the data collected from a patient survey and phantom experiment. Patients were divided into three different groups according to their breast glandularities, which were predicted from the inspection of previous mammograms. X-ray beam qualities that will be used in patient examinations were determined according to breast thickness and predicted glandularities. The MGD versus CBT relationship for all the examined patients resulted in a poor correlation (R(2) = 0.28). This relationship was separately obtained for each glandularity group and also for sub-groups of specific beam qualities. The best correlation (R(2) = 0.73) was obtained for the fatty breast group and Mo/Mo combination. A low correlation (R(2) = 0.34) was observed in the mid-glandularity group due to inclusion of a wide range of glandularities in this group. In the case of the dense breast group, although the glandularity range was narrow, there were e still high data scattering (R(2) = 0.25). This was probably due to the use of Mo/Rh and Mo/Mo combinations. This is validated by obtaining the MGD-CBT relationship specific to Mo/Mo combination (R(2) = 0.61).     

Comparison of total‐etch,self‐etch,and selective etching techniques on class V composite restorations prepared by Er:YAG laser and bur: a scanning electron microscopy study

The purpose of this study was to compare total‐etch, self‐etch, and selective etching techniques on the marginal microleakage of Class V composite restorations prepared by Er:YAG laser and bur. Class V cavities prepared on both buccal and lingual surfaces of 30 premolars by Er:YAG laser or bur and divided into six groups. The occlusal margins were in enamel, and the cervical margins were in cementum. Group‐1: bur preparation(bp)+Adper Single Bond 2 (ASB)+Filtek Z550 (FZ); Group‐2: laser preparation(lp)+(ASB)+(FZ); Group‐3: bp + Clearfil S3 Bond Plus (CSBP)+(FZ); Group‐4: lp+(CSBP) (FZ); Group‐5: bp + acid etching+(CSBP)+(FZ); Group‐6: lp + acid etching+(CSBP)+(FZ). All teeth were stored in distilled water at 37°C for 24 hr, and then thermocycled 1000 times (5–55°C). Five teeth from each group were chosen for the microleakage investigation, and two teeth for the scanning electron microscope evaluation. Teeth which were prepared for the microleakage test were immersed in .5% methylene blue dye for 24 hr. After immersion, the teeth were sectioned and observed under a stereomicroscope for dye penetration. Data were analyzed using Kruskal–Wallis and Mann–Whitney U tests (p < .05). More microleakage was observed in the cervical regions compared to the occlusal regions in Groups 3, 5, and 6, respectively (p < .05). There is no statistically significant difference in Groups 1, 2, and 4, in terms of cervical regions versus occlusal regions (p > .05). No significant differences were observed among any groups in terms of occlusal and cervical surfaces, separately (p > .05). Different etching techniques did not influence microleakage of Class V restorations prepared by Er:YAG laser and bur.