A contribution to the UV degradation of polyurethanes

The effects of the nature of the polyols used in polyurethane (PUR) synthesis on the structural transformations after ageing by UV irradiation has been studied. The investigations were performed on PUR prepared from polyester and polyether diol oligomers. The characterization of the samples before and after ageing in view of the structural changes, which influence the course of the photooxidative degradation and photocrosslinking as well as in view of changes of mechanical properties has been done. Comparative investigations were performed by spectroscopic and viscometric measurements. The results show pronounced heterogeneity of the degradative reactions, including the existence of crosslinking processes and producing thus very inhomogeneous polymeric material. The course and the intensity of photooxidative degradation of PUR differ together with changes of mechanical properties depending whether polyester or polyether polyol have been used. The processes of photooxidative degradation is less expressed in polyesterurethane then in polyurethane based on polyether, under the same conditions of experiments. Different structures of polyester diols caused the various ageing behaviour of PUR too.     

Thermal and structural properties of KPO3·Ln(PO3)3 glasses (Ln=rare earth ion)

Glass transition temperatures T_g and Raman spectra of KPO₃·Ln(PO₃)₃ (Ln=rare earth ion) glasses were measured for all rare earth members (except Pm). From the series behavior of the T_g and Raman data, it is concluded that the coordination number around rare earth ions changes, probably from nine to eight, in the middle of the rare earth series.     

Relaxation approach to topology optimization of frame structure under frequency constraint

This paper deals with the frame topology optimization under the frequency constraint and proposes an algorithm that solves a sequence of relaxation problems to obtain a local optimal solution with high quality. It is known that an optimal solution of this problem often has multiple eigenvalues and the feasible set is disconnected. Due to these two difficulties, conventional nonlinear programming approaches often converge to a local optimal solution that is unacceptable from a practical point of view. In this paper, we formulate the frequency constraint as a positive semidefinite constraint of a certain symmetric matrix, and then relax this constraint to make the feasible set connected. The proposed algorithm solves a sequence of the relaxation problems with gradually decreasing the relaxation parameter. The positive semidefinite constraint is treated with the logarithmic barrier function and, hence, the algorithm finds no difficulty in multiple eigenvalues of a solution. Numerical experiments show that global optimal solutions, or at least local optimal solutions with high qualities, can be obtained with the proposed algorithm.     

The effect of small dose of topiroxostat on serum uric acid in patients receiving hemodialysis

Introduction : Topiroxostat, a recently developed xanthine oxidase inhibitor, is expected to have fewer adverse effects than allopurinol because it has different mechanism of action from alloprinol. However, its dosage, usage and safety have not been established in patients with impaired renal function or those undergoing dialysis at the development since no studies was conducted in these patients. Methods : Cross over clinical trial using 3 months of allopurinol and topiroxostat on 27 maintain Japanese HD patients were carried out. The effects on oxidative stress status of both drugs were also evaluated by measuring oxidation reduction potential. Findings : Twenty‐five of twenty‐seven patients completed study. The mean serum uric acid levels in the topiroxostat‐treated arm was significantly lower than it in the allopurinol‐treated arm time‐dependently (P < 0.0001). Corrected oxidative stress ratio defined as biological antioxidant potential/diacron reactive oxygen metabolites was significantly increased in topiroxostat‐arm (*P = 0.0035), but not in allopurinol‐arm (P = 0.1429). No significant difference was seen in diacron reactive oxygen metabolites, biological antioxidant potential, static oxidation‐reduction potential, and capacity oxidation‐reduction potential between pre and post treatment of both drugs. Discussion : It is suggested that a low dose of topiroxostat decreased serum uric acid sufficiently to maintain it below 7.0 mg/dL in patients receiving hemodialysis.     

Parametric polynomial spectral factorization using the sum of roots and its application to a control design problem

This paper presents an algebraic approach to polynomial spectral factorization, an important mathematical tool in signal processing and control. The approach exploits an intriguing relationship between the theory of Gröbner bases and polynomial spectral factorization which can be observed through the sum of roots, and allows us to perform polynomial spectral factorization in the presence of real parameters. It is discussed that parametric polynomial spectral factorization enables us to express quantities such as the optimal cost in terms of parameters and the sum of roots. Furthermore an optimization method over parameters is suggested that makes use of the results from parametric polynomial spectral factorization and also employs two quantifier elimination techniques. This proposed approach is demonstrated in a numerical example of a particular control problem.     

Fabrication of piezoelectric multilayer thin-film actuators

In this study, we fabricated multilayer ceramics (MLCs) composed of multilayered Pb(Zr,Ti)O₃ (PZT) piezoelectric thin films with internal electrodes and evaluated their dielectric and piezoelectric properties. The stack of PZT ferroelectric layers (550 nm) and SrRuO₃ (SRO, 80 nm) electrodes were alternatively deposited on Pt/Ti-coated silicon-on-insulator substrates by radio-frequency magnetron sputtering. The MLCs composed of one, three, and five PZT layers were fabricated by the alternate sputtering deposition of PZT ferroelectric layers and SRO electrodes through the movable shadow mask. The capacitances of MLCs were proportionally increased with the number of PZT layers, while their relative dielectric constants were almost same among the each MLC. The MLCs exhibited symmetric and saturated P–E hysteresis loops similar to the conventional PZT thin films. We estimated that the piezoelectric properties of MLCs by FEM simulation, and confirmed that the effective transverse piezoelectric coefficients (d _31,eff ) increased with the number of PZT layers. The piezoelectric coefficients calculated to be d _31,eff  = ?2964 pC/N at 25 PZT layers, which is much higher than those of conventional single-layer piezoelectric thin films.     

Necessary and sufficient conditions for global optimality of eigenvalue optimization problems

The necessary and sufficient conditions for global optimality are derived for an eigenvalue optimization problem. We consider the generalized eigenvalue problem where real symmetric matrices on both sides are linear functions of design variables. In this case, a minimization problem with eigenvalue constraints can be formulated as Semi-Definite Programming (SDP). From the Karush-Kuhn-Tucker conditions of SDP, the necessary and sufficient conditions are derived for arbitrary multiplicity of the lowest eigenvalues for the case where important lower bound constraints are considered for the design variables. Received May 18, 2000     

Color system for skin color extraction

This paper describes a skin color extraction method which has high speed and high accuracy. There were many systems which could achieve the requirements, but they were useless due to tough limitations such as using two cameras to recognize correct coordinates, running only a specific background, wearing several gears, learning the users detailed information in advance, making a personalized database, and so on. In contrast, our approach, which uses the YIQ color system with a background estimation method for skin color extraction, achieved a good performance more than 30 fps, with strong robustness in complicated and poorly illuminated environments. This work was presented in part at the 12th International Symposium on Artificial Life and Robotics, Oita, Japan, January 25–27, 2007     

Application of full-factorial design for optimization of the moisture determination in wheat flour using infrared scales

We studied the parameters that may affect the analysis of the moisture content in wheat flour using infrared scales. The parameters were studied by one-factor at a time methodology and then, by full-factorial design (2³). The best condition using infrared scales occurred at 120 °C, with a sample weight of 1.5 g and an exposure time to infrared radiation of 6 min. We observed the interaction effect between the three factors studied. The analysis time was 60 times lower than classical method. The optimized method for determination of the moisture content in wheat flour using infrared scales was validated to range between 9 and 17 %.