Understanding why adult participants at the World Senior Games choose a healthy diet

Background

Identifying those seniors most likely to adopt a healthy diet, the relative importance they place on certain perceived benefits associated with a healthy diet, and whether these perceived benefits are associated with selected demographic, lifestyle, and health history variables is important for directing effective dietary health promotion programs.

Methods

Analyses are based on a cross-sectional convenience sample of 670 seniors aged 50 years and older at the 2002 World Senior Games in St. George, Utah. Data are assessed using frequencies, bivariate analysis, analysis of variance, and multiple logistic regression analysis.

Results

Fruit and vegetable consumption was significantly higher in individuals aged 70–79, in women, in those not overweight or obese, and in those with excellent overall health. Dietary fiber consumption was significantly higher in former or never smokers, current and previous alcohol drinkers, in those not overweight or obese, and in those with excellent health. The strongest motivating factors identified for adopting a healthy diet were to improve the quality of life, to increase longevity, and to prevent disease. Of intermediate importance were the need to feel a sense of control and to satisfy likes or dislikes. Least important were the desire to experience a higher level of spirituality, social reasons, and peer acceptance.

Conclusion

Seniors who have adopted a healthy diet are more likely to have chosen that behavior because of perceived health benefits than for personal and social benefits. Overweight or obese individuals and those in poor health were less likely to be engaged in healthy eating behavior and require special attention by dieticians and public health professionals.

     

Identification of leek-moth and diamondback-moth frass volatiles that stimulate parasitoid,Diadromus pulchellus

Acrolepiopsis assectella andPlutella xylostella frass volatiles, trapped on Tenax GC, were examined by capillary gas chromatography. In both moths, the same three disulfides, dimethyl, dipropyl, and methyl propyl, were the most abundant substances, but in different proportions. The synthetic disulfides elicited the same behavioral response by the parasitoid,Diadromus pulchellus as frass. The plant origin of these substances is discussed.     

Relationship Between Interfacial Water Layer Adhesion Loss of Silicon/Glass Fiber-Epoxy Systems: A Quantitative Study

Water at the polymer/substrate interface is often the major cause of adhesion loss in coatings, adhesives, and fiber-reinforced polymer composites. This study critically assesses the relationship between the interfacial water layer and the adhesion loss in epoxy/siliceous substrate systems. Both untreated and silane-treated Si substrates and untreated and silane-treated E-glass fibers were used. Thickness of the interfacial water layer was measured on epoxy/Si systems by Fourier transform infrared-multiple total internal reflection (FTIR-MTIR) spectroscopy. Adhesion loss of epoxy/Si systems and epoxy/E-glass fiber composites was measured by peel adhesion and short-beam shear tests, respectively. Little water accumulation at the epoxy/Si substrate interface was observed for silane-treated Si substrates, but about 10 monolayers of water accumulated at the interface between the epoxy and the untreated Si substrate following 100 h of exposure at 24 °C. More than 70% of the initial epoxy/untreated Si system peel strength was lost within 75 h of exposure, compared with 20% loss after 600 h for the silane-treated Si samples. Shear strength loss in composites made with untreated E-glass fiber was nearly twice that of composites fabricated with silane-treated fiber after 6 months of immersion in 60 °C water. Further, the silane-treated composites remained transparent, but the untreated fiber composites became opaque after water exposure. Evidence from FTIR-MTIR spectroscopy, adhesion loss, and visual observation strongly indicated that a water layer at the polymer/substrate interface is mostly responsible for the adhesion loss of epoxy/untreated siliceous substrate systems and epoxy/untreated glass fiber composites and that FTIR-MTIR is a viable technique to reliably and conveniently assess the adhesion loss attributable to water sorption at the interface.     

Immunoregulatory functions of paf-acether. VI. Dual effect on human B cell proliferation

The role of paf-acether (paf), a phospholipid cytokine, in the modulation of human B cell function was investigated. Paf, from 1×10⁻⁵ M to 10⁻⁶ M, decreased B cell proliferation induced by both phorbol myristate acetate (PMA) and anti-IgM antibodies (anti-IgM Ab). By contrast, 1×10⁻⁷ M to 1×10⁻⁹ M paf enhanced PMA triggered, but not anti-IgM triggered B cell proliferation. B cell proliferation was modulated between 24 and 72 hr of culture indicating that the effect of paf did not merely reflect a shift in proliferation kinetics. Interestingly, paf also enhanced the spontaneous proliferation of a Burkitt lymphoma-derived B cell line, Raji, which suggests that paf can directly act on B cells. The modulatory effect of paf on peripheral blood B cells was independent of PMA concentration, yet the effect on Raji cells was dependent upon cell density. The data suggest that paf is a potent modulator of B cell function, and may be involved in the control of humoral immune response. Based on a paper presented at the Third International Conference on Platelet-Activating Factor and Structurally Related Alkyl Ether Lipids, Tokyo, Japan, May 1989.     

Moisture absorption into ultrathin hydrophilic polymer films on different substrate surfaces

Moisture absorption into ultrathin poly(vinyl pyrrolidone) (PVP) films with varying thickness was examined using X-ray reflectivity (XR) and quartz crystal microbalance (QCM) measurements. Two different surfaces were used for the substrate: a hydrophilic silicon oxide (SiO_x) and a hydrophobic hexamethyldisilazane (HMDS) treated silicon oxide surface. The total equilibrium moisture absorption (solubility) was insensitive to the surface treatment in the thickest films (≈150 nm). However, strong reductions in the equilibrium uptake with decreasing PVP film thickness were observed on the HMDS surfaces, while the SiO_x surface exhibited thickness independent equilibrium absorption. The decreased absorption with decreasing film thickness is attributed a depletion layer of water near the polymer/HMDS interface, arising from hydrophobic interactions between the surface and water. The diffusivity of water decreased when the film thickness was less than 60 nm, independent of the surface treatment. Changes in the properties of ultrathin polymer films occur even in plasticized films containing nearly 50% water.     

Heavy-fuel flame radiation in gas turbine combustors—exploratory results

With lower costs and greater availability, heavy fuel oil appears as an attractive alternative to the conventional gas oil used in industrial gas turbines. However, higher levels of radiation and smoke are expected, and this note reports on some preliminary tests made with a combustion chamber burning fuels of different carbon content, ranging from kerosine to a 25% blend of residual fuel oil in gas oil, at a chamber pressure of 10 atm^*. The combustion rig was equipped with a total-radiation pyrometer and black-body furnace capable of measurement at different axial stations along the spray-stabilized flame. The presence of the residual fuel oil in the gas oil was found to promote significant increases in the mean levels of radiation, emissivity and smoke density, with a modest increase in liner temperature.     

Microstructure and its relationship to deformation processes in amorphous polymer glasses

The microdeformation morphology of a number of vinyl polymers with bulky side chains (type I) and arylene polymers with flexible oxygen linkages (type II) was studied by electron microscopy. The polyarylenes crazed only near the glass transition while the polyvinyls exhibited a crazing regime that extended to liquid nitrogen temperatures. In addition significantly less plastic strain was localized in type II glass crazes relative to those in type I glasses. In compatible blends of polystyrene (PS) and 2,6-dimethyl poly(phenylene oxide) (2MPPO), ca. 30% 2MPPO was sufficient to induce a transition from type I to type II crazing behavior. Small amounts of PS suppressed the low-temperature 2MPPO β relaxation but enhanced the intermediate transition of 2MPPO at higher temperatures. Blending increased the conformational energy of the 2MPPO chain and improved interchain packing. The propensity for the polymer glass to form sharp shear bands at the expense of diffuse bands was increased by a decrease in the conformation energy of the polymer chain and an improvement in the glassy state packing.     

Honeybee (Apis mellifera L.) queen feces: Source of a pheromone that repels worker bees

When placed in a small observation arena with workers, most young virgin honeybee queens released fecal (hindgut) material during agonistic interactions with workers and with each other. On release of this material, workers moved to the sides of the arena and groomed themselves. Bioassays of virgin queen fecal material demonstrated that it contains pheromone that repels workers and stimulates grooming behavior. Pheromone was present only in the feces of virgin queens that were more than 24 hr old and less than 2 weeks old. Feces of 2- to 4-day-old workers and virgin queens more than 2 weeks old did not elicit an avoidance response by workers. Moreover, the feces of young virgin queens had a strong fragrance, while that of older queens had a rancid odor and that of young workers had no detectable odor.     

Influence of chitosan characteristics on coagulation and flocculation of organic suspensions

Several samples of chitosan with different degrees of deacetylation and of different molecular weights were tested for the coagulation–flocculation of organic suspensions. Organic suspensions were prepared by mixing mushroom powder with tap water. Experiments were carried out at pH 5, pH 7, and pH 9. Because decreasing the pH reduced the amount of chitosan required to reach the required turbidity, at pH 9, a high concentration of chitosan was required to achieve the required treatment levels, whereas the difference was less significant between pH 7 and pH 5 (the required concentration of chitosan was halved). Though viscosity, correlated to the molecular weight of chitosan, affected treatment performance, its influence on the efficiency of coagulation–flocculation could be substantially reduced by slightly increasing the concentration of the polymer. This is of importance in the processing of industrial effluents: the aging of a chitosan solution, which may cause partial depolymerization, and loss of viscosity, will have a limited impact on process efficiency. The degree of deacetylation also has a limited effect on treatment performance, especially when the degree of deacetylation exceeds 90%. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 2070–2079, 2005     

Alumina Grown during Deposition of Thermal Barrier Coatings on NiCrAlY

The microstructure of Al₂O₃ formed by oxidation of a model NiCrAlY alloy during electron-beam physical vapor deposition of ZrO₂–7.6 mol% YO_1.5 is examined and compared with that formed on the bare substrate. The growth rate, morphology, and chemical composition of the oxide vary among the different constituents of the alloy surface and are further influenced by the O₂ partial pressure and the physical presence of the thermal barrier coating (TBC) layer. These differences, however, are largely limited to the outer oxide layer. The interplay between the TBC and the growing oxide leads to the formation of a fine-grain Al₂O₃–ZrO₂"mixed zone" within the thermally grown oxide. A mechanism is outlined to explain this behavior, based on the dissolution of ZrO₂ in a transient Al₂O₃ structure growing by outward diffusion of Al, and its subsequent reprecipitation when the metastable phase transforms to the stable α-Al₂O₃ form.