水资源承载力分析研究

水是人们生存必不可少的资源,是生产与生活的基础,但水资源短缺,时间、空间分布不均,利用率低,已成为制约各地经济可持续发展的重要因素之一。本文所选研究区域——昌宁县正处于经济快速发展时期,水资源承载力将会影响其发展,文章综合文献分析和实际调研数据,运用科学的方法进行水资源的承载力分析,结果表明:昌宁县水资源承载力目前与社会经济的发展相适应,但远期将会有所不足,因而要求协调人与自然的矛盾,促进昌宁县的可持续发展。     

Annular‐ring slot antenna designs with circular polarization radiation

The design of a microstrip‐fed annular‐ring slot antenna (ARSA) with circular polarization (CP) radiation is initially studied. To obtain CP radiation with broad 3‐dB axial ratio (AR) bandwidth that can cover the WiMAX 2.3 GHz (2305–2320 MHz, 2345–2360 MHz) and WLAN 2.4 GHz (2400–2480 MHz) bands, a novel technique of extending an inverted L‐shaped slot from the bottom section of the annular‐ring is proposed. To suppress the harmonic modes induced by the CP ARSA, the technique of integrating a defected ground structure into the annular‐ring slot is further introduced. From the measured results, 10‐dB impedance bandwidth and 3‐dB AR bandwidth of 44.86 and 9.68% were achieved by the proposed harmonic suppressed CP ARSA. Furthermore, average gain and radiation efficiency of ～4.7 dBic and 71%, respectively, were also exhibited across the bands of interest. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:337–345, 2015.     

A method for rapidly evaluating reliability and predicting remaining useful life using two-dimensional convolutional neural network with signal conversion

Journal of Mechanical Science and Technology - Real-time monitoring and rapid evaluation of bearing operating conditions, especially for the reliability evaluation and remaining useful life (RUL)...     

Analysis of Phytochemical Composition of Camellia oleifera Oil and Evaluation of its Anti-Inflammatory Effect in Lipopolysaccharide-Stimulated RAW 264.7 Macrophages

In China, Camellia oleifera oil (COO) is not only a common edible oil but also a traditional remedy widely applied to ameliorate a variety of illnesses associated with inflammation, such as mouth ulcers, thrush, eczema, etc. However, there has been a lack of relevant biological research on the anti-inflammatory capacity of COO, and the specific bioactive lipid phytochemicals contributing to the anti-inflammatory effect need further research. In this study, the RAW 264.7 macrophages model was used to investigate the anti-inflammatory capacity of COO. Our data showed that 33–200 μg/mL COO markedly inhibited the lipopolysaccharide lipopolysaccharide (LPS)-stimulated nitric oxide (NO.) secretion via the suppression of Nos2 and Cox-2 expression. The enzyme immunoassay confirmed that COO also exhibited a strong suppressive effect on the expression of proinflammatory cytokines such as Tnf-α and Il-6. To further explore the correlation between the anti-inflammatory effects and the lipid phytochemicals in COO, 10 samples were collected and screened for their chemical compositions. It was interestingly demonstrated that the polyphenol extracts of COO play a vital role in its anti-inflammatory properties. In addition, an oil-in-water (O/W) emulsion-based system was also developed to deliver the liposoluble COO into the cells, and the feasibility of this system was confirmed. Our research confirms the anti-inflammatory potential of COO and highlights that the main functional ingredient is polyphenol extracts. This may provide a scientific basis for the comprehensive utilization and development of COO and related functional foods.     

Novel thermal-sensitive properties of NBT-BZT composite ceramics for high-temperature NTC thermistors

We found for the first time that (1 − x) Na_0.5Bi_0.5TiO₃-xBiZn_0.5Ti_0.5O₃ (NBT–BZT) composite ceramics showed negative temperature coefficient (NTC) at a high temperature. The NBT–BZT nanopowders were successfully prepared by Pechini method. Their ceramics were sintered at 1100°C. The NBT–BZT ceramic exhibited a good linear relationship between logarithm of electrical resistivity (Inρ) and reciprocal of absolute temperature (1000/T) at 250°C–1050°C. The obtained ρ₆₀₀, ρ₉₀₀, and B_600/900 constants of the NBT–ZBT NTC thermistors are approximately 5.92 × 10⁶ to 3.01 × 10⁴ Ω cm, 7.03 × 10³ to 7.60 × 10² Ω cm and 2.3 × 10⁴-1.3 × 10⁴ K, respectively. The electrical characteristics can be tuned to the desired value by changing the Na_0.5Bi_0.5TiO₃ content in the compound. The electrical conductivity in these compounds is due to the electron jumps between Ti³⁺ and Ti⁴⁺ and oxygen-ion conductivity. Results demonstrate a tremendous potential of the studied system for perovskite materials with NTC performance.     

山东栖霞—大柳行地区金矿找矿靶区地质评价及优选

栖霞—大柳行地区位于胶东中部栖霞—蓬莱金矿成矿带内，是胶东重要的金成矿区，成矿条件优越。为了对圈定靶区进行优选分类，通过对该区地质背景、找矿靶区评价、找矿靶区优选方面展开综合研究，并结合勘查工作程度和矿业权设置情况，划分出3类预测区，选定了5个靶区为今后优先部署勘查工作的方向。     

Healing Pattern Analysis for Dental Implants Using the Mechano-Regulatory Tissue Differentiation Model

(1) Background: Our aim is to reveal the influence of the geometry designs on biophysical stimuli and healing patterns. The design guidelines for dental implants can then be provided. (2) Methods: A two-dimensional axisymmetric finite element model was developed based on mechano-regulatory algorithm. The history of tissue differentiation around eight selected implants can be predicted. The performance of the implants was evaluated by bone area (BA), bone-implant contact (BIC); (3) Results: The predicted healing patterns have very good agreement with the experimental observation. Many features observed in literature, such as soft tissues covering on the bone-implant interface; crestal bone loss; the location of bone resorption bumps, were reproduced by the model and explained by analyzing the solid and fluid biophysical stimuli and (4) Conclusions: The results suggested the suitable depth, the steeper slope of the upper flanks, and flat roots of healing chambers can improve the bone ingrowth and osseointegration. The mechanism related to solid and fluid biophysical stimuli were revealed. In addition, the model developed here is efficient, accurate and ready to extend to any geometry of dental implants. It has potential to be used as a clinical application for instant prediction/evaluation of the performance of dental implants.