Off-axis measurements of atmospheric trace gases by use of an airborne ultraviolet-visible spectrometer

An airborne UV-visible spectrometer, the Gas Analyzer Spectrometer Correlating Optical Differences, airborne version (GASCOD/A4pi) was successfully operated during the Airborne Polar Experiment, Geophysica Aircraft in Antarctica airborne campaign from Ushuaia (54 degrees 49' S, 68 degrees 18' W), Argentina in southern spring 1999. The instrument measured scattered solar radiation through three optical windows with a narrow field of view (FOV), one from the zenith, two from the horizontal, as well as actinic fluxes through 2pi FOV radiometric heads. Only a few airborne measurements of scattered solar radiation at different angles from the zenith are available in the literature. With our configuration we attempted to obtain the average line-of-sight concentrations of detectable trace gases. The retrieval method, based on differential optical absorption spectroscopy, is described and results for ozone are shown and compared with measurements from an in situ instrument as the first method of validation.     

Proteolysis of alphas-casein as a marker of Grana Padano cheese ripening

Since casein proteolysis has a critical role in defining the typical characteristics of Grana Padano cheese, we evaluated the hydrolysis of alphas-casein during the ripening process. Thanks to the high specificity of the anti-alphas((alphas1 + alphas2)-casein monoclonal antibody and amino acid sequence determination, it was possible to identify three main alphas-casein-derived polypeptides in cheese: alphaa, alphab, and alphac. Their production by the three enzymes most involved in cheese proteolysis (pepsin, chymosin, and plasmin) was evaluated by performing in vitro digestions. Data showed that alphaa was released in cheese mainly by the chymosin attack, while alphab and alphac were due to the action of plasmin. A significant correlation between the abundance of some polypeptides and ripening process was shown.     

Availability analysis of a N modules parallel system with common memory,central controller and distributed software

Parallel systems with processing distributed in the various modules are very interesting examples of hardware/software tradeoffs within a complex structure. An example of such a system mode of N modules, has been considered. The implications of a common memory and a central controller are analysed and an availability model is derived.The division of the software task into subtasks is viewed as a source of possible deadlock of the structure. Series catastrophic states due to hard core units and software coupling are included in the availability analysis.     

Application of multi-way models to the time-resolved fluorescence of polycyclic aromatic hydrocarbons mixtures in water

The time-resolved laser-induced fluorescence of a series of polycyclic aromatic compounds (PAHs) and mixtures of these latter in aqueous solution was measured by means of an apparatus equipped with optical fibers, which allows their real time in situ monitoring. The potential of such spectroscopic technique, yielding 4-way fluorescence data arrays, together with the application of multi-way models to the matricized data, was tested for the resolution of complex aqueous mixtures containing low concentrations of PAHs, as typical fluorescent pollutants in aquatic systems. PARAllel FACtors analysis was employed for the qualitative resolution of PAHs mixtures and for calculating the fluorescence lifetimes of single PAHs; n-way partial least squares analysis was applied for evaluating the concentration of the single PAHs in the aqueous mixtures.     

Characterisation of properties of nickel in silicon using thermally stimulated capacitance method

Detailed TSCAP measurements on silicon P⁺N and N⁺P diodes confirm the existence of two acceptor levels of nickel lying 0.21 ± 0.01 and 0.41 ÷ 0.01 eV from the valence and conduction bands respectively. Concentration of these centers, their spatial distribution and behaviours after several annealing treatments are also presented.     

First data from the EGLE experiment onboard the ISS

EGLE is a wide frequency band search- coil magnetometer designed and built at the Roma Tre University. It has been installed onboard the ISS by the Italian astronaut Roberto Vittori on April 25, 2005 within the LAZIO- EGLE experiment carried out during the ENEIDE Soyuz mission. The scope of the experiment is to test EGLE in space and to investigate geomagnetic field variations. The main applications of EGLE are the study of electromagnetic environment inside the ISS, the correlation of magnetic field data with particle fluxes detected by LAZIO particle detector, and the monitoring of ionospheric perturbations possibly caused by Earth seismic activity. Since continuous electromagnetic field measurements on board the ISS are important for diverse space applications, a magnetometer with a suitable design is requested. Appropriate solutions for these applications, which have been adopted by EGLE, are in particular the use of 1- Wire technology and the possibility to detect by means of a search- coil magnetometer a large portion of the ULF frequency band, usually measured by flux- gate probes. To investigate the topside ionosphere electromagnetic environment and stability of Van Allen radiation belts in relation with seismic and anthropogenic electromagnetic emissions, a specific satellite mission (the ESPERIA project) has been designed for the Italian Space Agency (ASI), and up to now a few instruments of its payload have been built and tested in space. One of them is exactly the EGLE search- coil magnetometer. The first magnetic observations performed by this instrument reveal to be promising and demand for a further and deeper analysis based on a longer time series of data.     

Shallow Trench Isolation for the 45-nm CMOS Node and Geometry Dependence of STI Stress on CMOS Device Performance

In the present work, a high aspect ratio process (HARP) using a new O₃/TEOS based sub atmospheric chemical vapor deposition process was implemented as STI gapfill in sub-65-nm CMOS. Good gapfill performance up to aspect ratios greater than 10:1 was demonstrated. Since the HARP process does not attack the STI liner as compared to HDP, a variety of different STI liners can be implemented. By comparing HARP with HDP, the geometry dependence of nand p-FET performance due to STI stress is discussed     

Channel Assignment Strategies for Multiradio Wireless Mesh Networks: Issues and Solutions

Next-generation wireless mobile communications will be driven by converged networks that integrate disparate technologies and services. The wireless mesh network is envisaged to be one of the key components in the converged networks of the future, providing flexible high- bandwidth wireless backhaul over large geographical areas. While single radio mesh nodes operating on a single channel suffer from capacity constraints, equipping mesh routers with multiple radios using multiple nonoverlap- ping channels can significantly alleviate the capacity problem and increase the aggregate bandwidth available to the network. However, the assignment of channels to the radio interfaces poses significant challenges. The goal of channel assignment algorithms in multiradio mesh networks is to minimize interference while improving the aggregate network capacity and maintaining the connectivity of the network. In this article we examine the unique constraints of channel assignment in wireless mesh networks and identify the key factors governing assignment schemes, with particular reference to interference, traffic patterns, and multipath connectivity. After presenting a taxonomy of existing channel assignment algorithms for WMNs, we describe a new channel assignment scheme called MesTiC, which incorporates the mesh traffic pattern together with connectivity issues in order to minimize interference in multi- radio mesh networks.     

Design of an enhanced access point to optimize TCP performance in Wi-Fi hotspot networks

In the last years, the number of Wi-Fi hotspots at public venues has undergone a substantial growth, promoting the WLAN technologies as the ubiquitous solution to provide high-speed wireless connectivity in public areas. However, the adoption of a random access CSMA-based paradigm for the 802.11 MAC protocol makes difficult to ensure high throughput and a fair allocation of radio resources in 802.11-based WLANs. In this paper we evaluate extensively via simulations the interaction between the flow control mechanisms implemented at the TCP layer and the contention avoidance techniques used at the 802.11 MAC layer. We conducted our study considering initially M wireless stations performing downloads from the Internet. From our results, we observed that the TCP downlink throughput is not limited by the collision events, but by the inability of the MAC protocol to assign a higher chance of accessing the channel to the base station. We propose a simple and easy to implement modification of the base station’s behavior with the purpose of increasing the TCP throughput reducing useless MAC protocol overheads. With our scheme, the base station is allowed to transmit periodically bursts of data frames towards the mobile hosts. We design a resource allocation protocol aimed at maximizing the success probability of the uplink transmissions by dynamically adapting the burst length to the collision probability estimated by the base station. By its design, our scheme is also beneficial to achieve a fairer allocation of the channel bandwidth among the downlink and uplink flows, and among TCP and UDP flows. Simulation results confirm both the improvement in the TCP downlink throughput and the reduction of system unfairness.