Leaf Volatiles from Nonhost Deciduous Trees: Variation by Tree Species, Season and Temperature, and Electrophysiological Activity in Ips typographus

The leaf volatiles emitted from four nonhost tree species of Ips typographus, i.e. Betula pendula, B. pubescens, Populus tremula, and Sambucus nigra, were collected outdoors by headspace sampling in situ and analyzed by GC-MS. Three major classes of compounds, aliphatics [mainly green-leaf volatiles (GLVs)], monoterpenes, and sesquiterpenes, existed in all the deciduous tree species investigated. In June, when the bark beetles are searching in flight for host trees, GLVs mainly consisting of (Z)-3-hexenyl acetate and (Z)-3-hexen-1-ol were the dominant constituents in B. pendula and S. nigra. In B. pubescens and P. tremula, sesquiterpenes (and their derivatives) and monoterpenes made up the major part of whole volatile blends, respectively. Surprisingly, sesquiterpene alcohols and other oxides released from B. pubescens in considerable amounts were not found in the closely related species, B. pendula. By August, both the total volatiles and individual compounds significantly decreased, mainly due to the maturation of leaves, since the light intensity and temperatures during sampling were the same as in June. There were almost no volatiles detected from P. tremula and S. nigra leaves in August. The total emissions from these deciduous species were significantly different among the species, with B. pubescens releasing 5–10 times more than other species. Under the conditions of constant light intensity and humidity, emissions of both total volatiles and most individual components of severed B. pendula and S. nigra branches (with fresh leaves) increased according to a saturation curve from 16°C to 40°C. Ips typographus antennae responded strongly to green leaf alcohols: (Z)-3-hexen-1-ol, 1-hexanol, and (E)-2-hexen-1-ol, but not to aldehydes or acetates in GC-EAD analyses of B. pendula and B. pubescens leaf volatiles. No antennal responses to monoterpenes, sesquiterpenes, or sesquiterpene oxides were found. These three antennally active GLVs emitted from nonhost tree leaves might be indicators of a wrong habitat in the host selection of conifer bark beetles.     

Tetradecane and hexadecane binary mixtures as phase change materials (PCMs) for cool storage in district cooling systems

As the demand for refrigeration and air-conditioning has increased during the last decade, district cooling systems have been introduced in some major European cities. In a district cooling system, the combination of central cooling facilities and cool storage systems provides economic advantages over older conventional cooling plants. A cool storage system can meet the same total cooling load as a non-storage system over a given period of time with a smaller chiller. Cool storage systems using Phase Change Materials (PCMs) have a low temperature range and high energy density in the melting solidification of PCMs compared to sensible heat storage. Thus they are advantageous in reducing the storage volume, heat loss, and size of the chilling equipment. In this paper we describe some paraffin waxes and their binary mixtures. We discuss the thermal properties of laboratory-grade tetradecane, hexadecane and their binary mixtures, and we demonstrate their potential for use as PCMs for cool storage. The thermal properties include freezing point, the heat of fusion, thermal stability and volume expansion during the phase change process. In the study, a Differential Scanning Calorimeter (DSC) was used to determine the heat of fusion of these materials and to generate thermal data for study and analysis. The results show that these materials are attractive candidates as potential PCMs for cool storage in district cooling systems. However, because of the high cost of laboratory-grade materials, technical-grade materials must be used for cool storage.     

Analysis of an image processing method for fiber orientation in polymer composites

The errors in fiber orientation distribution measurements of compression molding materials have been investigated, for generated as well as for real distributions. Because of the size of the sample, only a finite number of fibers are visible in a picture leading to a statistical error in the measurement. A method is proposed to express this error as function of the number of visible fibers and the number of subintervals the distribution is divided into. Studies of the error In a Fraunhofer/FT based fiber orientation distribution analysis have been performed, including effects of increasing number of fibers (fiber‐fiber intersections) in generated pictures and investigation of the errors in real fiber images. All steps in a fiber orientation distribution analysis of SMC/GMT kind of material are described, including suitable equipment, image enhancement methods and investigation of the errors present in analysis of a real image as well as comparisons to hand–measured data.     

Leaf Apoplast of Field-Grown Potato Analyzed by Quantitative Proteomics and Activity-Based Protein Profiling

Multiple biotic and abiotic stresses challenge plants growing in agricultural fields. Most molecular studies have aimed to understand plant responses to challenges under controlled conditions. However, studies on field-grown plants are scarce, limiting application of the findings in agricultural conditions. In this study, we investigated the composition of apoplastic proteomes of potato cultivar Bintje grown under field conditions, i.e., two field sites in June–August across two years and fungicide treated and untreated, using quantitative proteomics, as well as its activity using activity-based protein profiling (ABPP). Samples were clustered and some proteins showed significant intensity and activity differences, based on their field site and sampling time (June–August), indicating differential regulation of certain proteins in response to environmental or developmental factors. Peroxidases, class II chitinases, pectinesterases, and osmotins were among the proteins more abundant later in the growing season (July–August) as compared to early in the season (June). We did not detect significant differences between fungicide Shirlan treated and untreated field samples in two growing seasons. Using ABPP, we showed differential activity of serine hydrolases and β-glycosidases under greenhouse and field conditions and across a growing season. Furthermore, the activity of serine hydrolases and β-glycosidases, including proteins related to biotic stress tolerance, decreased as the season progressed. The generated proteomics data would facilitate further studies aiming at understanding mechanisms of molecular plant physiology in agricultural fields and help applying effective strategies to mitigate biotic and abiotic stresses.     

Interface engineered ultrashort period Cr-Ti multilayers as high reflectance mirrors and polarizers for soft x rays of lambda = 2.74 nm wavelength

Cr-Ti multilayers with ultrashort periods of 1.39-2.04 nm have been grown for the first time as highly reflective, soft-x-ray multilayer, near-normal incidence mirrors for transition radiation and Cherenkov radiation x-ray sources based on the Ti-2p absorption edge at E = 452 eV (lambda = 2.74 nm). Hard, as well as soft, x-ay reflectivity and transmission electron microscopy were used to characterize the nanostructure of the mirrors. To achieve minimal accumulated roughness, improved interface flatness, and to avoid intermixing at the interfaces, each individual layer was engineered by use of a two-stage ion assistance process during magnetron sputter deposition: The first 0.3 nm of each Ti and Cr layer was grown without ion assistance, and the remaining 0.39-0.72 nm of the layers were grown with high ion-neutral flux ratios phi (phiTi = 3.3, phiCr = 2.2) and a low energy Eion (ETi = 23.7 and ECr = 21.2), ion assistance. A maximum soft-x-ray reflectivity of R = 2.1% at near-normal incidence (approximately 78.8 degrees) was achieved for a multilayer mirror containing 100 bilayers with a modulation period of 1.379 nm and a layer thickness ratio of tau = 0.5. For a polarizing multilayer mirror with 150 bilayers designed for operation at the Brewster angle, 45 degrees, an extinction ratio, Rs/Rp, of 266 was achieved with an absolute reflectivity of R = 4.3%.     

Biodegradation, bioaccessibility, and genotoxicity of diffuse polycyclic aromatic hydrocarbon (PAH) pollution at a motorway site

Diffuse pollution of surface soil with polycyclic aromatic hydrocarbons (PAHs) is problematic in terms of the large areas and volumes of polluted soil. The levels and effects of diffuse PAH pollution at a motorway site were investigated. Surface soil was sampled with increasing distance from the asphalt pavement and tested for total amounts of PAHs, amounts of bioaccessible PAHs, total bacterial populations, PAH degrader populations, the potential for mineralization of 14C-PAHs, and mutagenicity. Elevated PAH concentrations were found in the samples taken 1-8 m from the pavement. Soil sampled at greater distances (12-24 m) contained only background levels of PAHs. The total bacterial populations (CFU and numbers of 16S rDNA genes) were similar for all soil samples, whereas the microbial degrader populations (culturable PAH degraders and numbers of PAH dioxygenase genes) were most abundant in the most polluted samples close to the pavement. Hydroxypropyl-beta-cyclodextrin extraction of soil PAHs, as a direct estimate of the bioaccessibility, indicated that only 1-5% of the PAHs were accessible to soil bacteria. This low bioaccessibility is suggested to be due to sorption to traffic soot particles. The increased PAH level close to the pavement was reflected in slightly increased mutagenic activity (1 m, 0.32 +/- 0.08 revertants g(-1) soil; background/ 24 m: 0.08 +/- 0.04), determined by the Salmonella/ microsome assay of total extractable PAHs activated by liver enzymes. The potential for lighter molecular weight PAH degradation in combination with low bioaccessibility of heavier PAHs is proposed to lead to a likely increase in concentration of heavier PAHs over time. These residues are, however, likely to be of low biological significance.     

Creating hot nanoparticle pairs for surface-enhanced Raman spectroscopy through optical manipulation

We use optical tweezers to move single silver nanoparticles into near-field contact with immobilized particles, forming isolated surface-enhanced Raman spectroscopy (SERS) active Ag particle dimers. The surface-averaged SERS intensity increases by a factor approximately 20 upon dimerization. Electrodynamics calculations indicate that the final approach between the particles is due to "optical binding". The described methodology may facilitate controlled single molecule SERS analysis.     

Physicochemical and drug delivery aspects of lipid-based liquid crystalline nanoparticles: a case study of intravenously administered propofol

Liquid crystalline nanoparticles (LCNP) formed through lipid self-assembly have a range of attractive properties as in vivo drug delivery carriers. In particular they offer: a wide solubilization spectrum, and consequently high drug payloads; effective encapsulation; stabilization and protection of sensitive drug substances. Here we present basic physicochemical features of non-lamellar LCNP systems with a focus on intravenous drug applications. This is exemplified by the formulation properties and in vivo behavior using the drug substance propofol; a well-known anesthetic agent currently used in clinical practice in the form of a stable emulsion. In order to appraise the drug delivery features of the LCNP system the current study was carried out with a marketed propofol emulsion product as reference. In this comparison the propofol-LCNP formulation shows several useful features including: higher drug-loading capacity, lower fat-load, excellent stability, modified pharmacokinetics, and an indication of increased effect duration.     

Proton transfer reaction mass spectrometry and the unambiguous real-time detection of 2,4,6 trinitrotoluene

Fears of terrorist attacks have led to the development of various technologies for the real-time detection of explosives, but all suffer from potential ambiguities in the assignment of threat agents. Using proton transfer reaction mass spectrometry (PTR-MS), an unusual bias dependence in the detection sensitivity of 2,4,6 trinitrotoluene (TNT) on the reduced electric field (E/N) has been observed. For protonated TNT, rather than decreasing signal intensity with increasing E/N, which is the more usual sensitivity pattern observed in PTR-MS studies, an anomalous behavior is first observed, whereby the signal intensity initially rises with increasing E/N. We relate this to unexpected ion-molecule chemistry based upon comparisons of measurements taken with related nitroaromatic compounds (1,3,5 trinitrobenzene, 1,3 dinitrobenzene, and 2,4 dinitrotoluene) and electronic structure calculations. This dependence provides an easily measurable signature that can be used to provide a rapid highly selective analytical procedure to minimize false positives for the detection of TNT. This has major implications for Homeland Security and, in addition, has the potential of making instrumentation cost-effective for use in security areas. This study shows that an understanding of fundamental ion-molecule chemistry occurring in low-pressure drift tubes is needed to exploit selectivity and sensitivity for analytical purposes.     

Suppression of the zero-order diffracted beam from a pixelated spatial light modulator by phase compression

Phase compression is used to suppress the on-axis zero-order diffracted (ZOD) beam from a pixelated phase-only spatial light modulator (SLM) by a simple modification to the computer generated hologram (CGH) loaded onto the SLM. After CGH design, the phase of each SLM element is identically compressed by multiplying by a constant scale factor and rotated on the complex unit-circle to produce a cancellation beam that destructively interferes with the ZOD beam. Experiments achieved a factor of 3 reduction of the ZOD beam using two different liquid-crystal SLMs. Numerical simulation analyzed the reconstructed image quality and diffraction efficiency versus degree of phase compression and showed that phase compression resulted in little image degradation or power loss.