Evidence of low-symmetry phases in pressure-dependent Raman spectroscopic study of BaTiO<Subscript>3</Subscript>

In the earlier pressure-dependent Raman spectroscopic studies, it has been reported that BaTiO₃ undergoes a tetragonal to cubic phase transition above ~ 2 GPa, whereas pressure-dependent X-ray absorption, X-ray diffuse scattering studies and pair distribution function studies have reported the presence of a low-symmetry rhombohedral phase above ~ 2.3 GPa. In this report, we present our pressure-dependent Raman spectroscopic studies on polycrystalline BaTiO₃ which shows that it first undergoes a transition from tetragonal to orthorhombic/rhombohedral phase above ~ 2.6 GPa and then finally goes to the cubic phase above 8.4 GPa. Pressure-dependent synchrotron X-ray diffraction (SXRD) studies have also been carried out that provided rate of change of volume as a function of pressure resulting in bulk modulus of 215 ± 9 GPa.     

Determining link weight system under various objectives for OSPF networks using a Lagrangian relaxation-based approach

An important traffic engineering problem for OSPF networks is the determination of optimal link weights. Certainly, this depends on the traffic engineering objective. Regardless, often a variety of performance measures may be of interest to a network provider due to their impact on the network. In this paper, we consider different objectives and discuss how they impact the determination of the link weights and different performance measures. In particular, we propose a composite objective function; furthermore, we present a Lagrangian relaxation-based dual approach to determine the link weight system. We then consider different performance measures and discuss the effectiveness of different objectives through computational studies of a variety of network topologies. We find that our proposed composite objective function with Lagrangian relaxation-based dual approach is very effective in meeting different performance measures and is computationally very fast.     

An Improved Chua's Circuit and Its Use in Hyperchaotic Circuit

An improved implementation of Chua's circuit using dual output current conveyor is presented. The present proposal offers the advantages of low component count, current mode processing, availability of current across inductor and availability of voltage across inductor in form of current. The application of present circuit in designing low hardware inductorless hyperchaotic circuit is also presented. The paper concludes with a discussion of advantages of present proposal of Chua's circuit and inductorless hyper chaotic circuit thus designed over their earlier counterparts. The designs are adequately supported by SPICE simulation results. Patent pending.     

Fenton and Electro-Fenton Methods for Oxidation of H-Acid and Reactive Black 5

Oxidative treatment of H-acid (HA) and Reactive Black 5 (RB5) using Fenton reagent (Fe2+/H2O2) and the electro-Fenton (EF) method is reported. Optimization of doses of ferrous iron and hydrogen peroxide was carried out in each case using HA; and the oxidation of RB5 was also carried out under the optimized conditions. Approximately 71% chemical oxygen demand (COD) was removed in 2 h using the conventional Fenton method at optimized doses: Fe2+ = 0.3?g/L (5.37 mM), H2O2 = 6?mL/L (53.0 mM), H2O2/Fe2+ = 10. In contrast, more than 92% COD was removed in 15 min using the EF method with an optimized Fe2+ dose of 0.130?g/L (2.34 mM) and 8?ml/L (70.6 mM) of H2O2. The pseudo-first-order rate constants (k) for the Fenton reagent and EF method were 0.054 and 0.38?min?1. The COD removal through the EF method was seven times faster. The calculated energy requirement of the EF method was 0.82?kg?COD/kW?h at the minimum applied current (0.25 A) when approximately 92.5% COD was removed. In the case of RB5, about 67 and 87% COD was removed under optimized Fenton and electro-Fenton conditions, respectively. The higher efficiency of the EF method was attributed to incremental addition of Fe2+ and accompanying higher H2O2/Fe2+ molar ratio. The results are discussed in the light of the mechanism for Fenton’s oxidation.     

Determining Hydraulic Characteristics of Production Wells using Genetic Algorithm

Proper well management requires the determination of characteristic hydraulic parameters of production wells such as well loss coefficient (C) and aquifer loss coefficient (B), which are conventionally determined by the graphical analysis ofstep-drawdowntest data. However, in the present study, the efficacy of a non-conventional optimization technique called Genetic Algorithm (GA), which ensures near-optimal or optimal solutions, is assessedin determining well parameters from step-drawdown test data. Computer programs were developed to optimize the well parametersby GA technique for two cases: (i) optimization of B and C only, and (ii) optimization of B, C and p (exponent) as well as to evaluate the well condition. The reliability and robustness of the developed computer programs were tested usingnine sets of published and unpublished step-drawdown data from varying hydrogeologic conditions. The well parameters obtained by the GA technique were compared with those obtained by the conventional graphical method in terms of root mean square error(RMSE) and visual inspection. It was revealed that the GA technique yielded more reliable well parameters with significantlylow values of RMSE for almost all the datasets, especially in caseof three-variable optimization. The optimal values of the parametersB, C and p for the nine datasets were found to range from 0.382 to 2.292 min m^-2, 0.091 to 3.262, and 1.8 to 3.6, respectively. Because of a wide variation of p, the GA techniqueresulted in considerably different but dependable and robust well parameters as well as well specific capacity and well efficiency compared to the graphical method. The condition of three wells was found to be good, one well bad and that of the remaining five wells satisfactory. The performance evaluation of the developed GA code indicated that a proper selection of generation number and population size is essential to ensure efficient optimization. Furthermore,a sensitivity analysis of the obtained optimal parameters demonstrated that the GA technique resulted in a unique set ofthe parameters for all the nine datasets. It is concluded thatthe GA technique is an effective and reliable numerical tool for determining the characteristic hydraulic parameters of production wells.     

Removal of lead from contaminated water bodies using sea nodule as an adsorbent

Adsorption of water soluble lead on polymetallic sea nodule has been studied in detail. Complete decontamination of lead is possible by appropriate sea nodule dosing. Adsorption is also dependent on pH and best adsorption is achieved at pH 6. Beyond pH 6, the desorption of lead from sea nodule surface is practically zero. Residual metal concentrations in the filtrate after adsorption is negligible. Both Freundlich and Langmuir isotherms may reasonably explain adsorption of lead on sea nodule. Chemically bound moisture plays a very crucial role in lead adsorption. Lead adsorptive capability of sea nodule is practically destroyed when calcined at a temperature of 900 degrees C. Lead loading capacity of sea nodule has been estimated at 440 mg of lead per gram of sea nodule. The performance of sea nodule as a lead adsorbent has been successfully tested over six simulated lead contaminated water systems. Lead loading capacity of sea nodule compares favorably with other adsorbents like activated carbon, ion exchange resin, anionic clay, granulated blast furnace slag and natural and treated zeolites.     

Increasing coverage to improve detection of network and host anomalies

For intrusion detection, the LERAD algorithm learns a succinct set of comprehensible rules for detecting anomalies, which could be novel attacks. LERAD validates the learned rules on a separate held-out validation set and removes rules that cause false alarms. However, removing rules with possible high coverage can lead to missed detections. We propose three techniques for increasing coverage—Weighting, Replacement and Hybrid. Weighting retains previously pruned rules and associate weights to them. Replacement, on the other hand, substitutes pruned rules with other candidate rules to ensure high coverage. We also present a Hybrid approach that selects between the two techniques based on training data coverage. Empirical results from seven data sets indicate that, for LERAD, increasing coverage by Weighting, Replacement and Hybrid detects more attacks than Pruning with minimal computational overhead.     

Scheduling UET-UCT tasks: branch-and-bound search in the priority space

The paper is concerned with the problem of scheduling partially ordered unit execution time tasks on parallel processors with unit communication delays and release times. Two criteria are considered, the maximum lateness and its particular case, the makespan. This problem plays an important role in scheduling theory and was originally inspired by the applications to multi-processor computer systems. It is well known that for both criteria the problem is NP-hard in the strong sense. The paper presents an implementation of the branch-and-bound method which does not partition the feasible region explicitly. The theoretical results are complemented by computational experiments.     

Finite-Size Scaling for Equilibrium Properties of Confined Liquid Helium-Four Near the Lambda Point

Simple analytic closed-expression scaling functions are reported for the lambda transition of confined liquid ⁴He in equilibrium. The results follow directly from the quantization of the fluctuation modes of the order parameter and exhibit a smooth temperature dependence down to a shifted transition temperature.