Can Brazil replace 5% of the 2025 gasoline world demand with ethanol?

Increasing use of petroleum, coupled with concern for global warming, demands the development and institution of CO₂ reducing, non-fossil fuel-based alternative energy-generating strategies. Ethanol is a potential alternative, particularly when produced in a sustainable way as is envisioned for sugarcane in Brazil. We consider the expansion of sugarcane-derived ethanol to displace 5% of projected gasoline use worldwide in 2025. With existing technology, 21 million hectares of land will be required to produce the necessary ethanol. This is less than 7% of current Brazilian agricultural land and equivalent to current soybean land use. New production lands come from pasture made available through improving pasture management in the cattle industry. With the continued introduction of new cane varieties (annual yield increases of about 1.6%) and new ethanol production technologies, namely the hydrolysis of bagasse to sugars for ethanol production and sugarcane trash collection providing renewable process energy production, this could reduce these modest land requirements by 29–38%.     

Lamb Meat Quality Assessment by Support Vector Machines

The correct assessment of meat quality (i.e., to fulfill the consumer’s needs) is crucial element within the meat industry. Although there are several factors that affect the perception of taste, tenderness is considered the most important characteristic. In this paper, a Feature Selection procedure, based on a Sensitivity Analysis, is combined with a Support Vector Machine, in order to predict lamb meat tenderness. This real-world problem is defined in terms of two difficult regression tasks, by modeling objective (e.g. Warner–Bratzler Shear force) and subjective (e.g. human taste panel) measurements. In both cases, the proposed solution is competitive when compared with other neural (e.g. Multilayer Perceptron) and Multiple Regression approaches.     

The univector plasmid-fusion system, a method for rapid construction of recombinant DNA without restriction enzymes

BACKGROUND:. Modern biological research is highly dependent upon recombinant DNA technology. Conventional cloning methods are time-consuming and lack uniformity. Thus, biological research is in great need of new techniques to rapidly, systematically and uniformly manipulate the large sets of genes currently available from genome projects. RESULTS:. We describe a series of new cloning methods that facilitate the rapid and systematic construction of recombinant DNA molecules. The central cloning method is named the univector plasmid-fusion system (UPS). The UPS uses Cre-lox site-specific recombination to catalyze plasmid fusion between the univector - a plasmid containing the gene of interest - and host vectors containing regulatory information. Fusion events are genetically selected and place the gene under the control of new regulatory elements. A second UPS-related method allows for the precise transfer of coding sequences only from the univector into a host vector. The UPS eliminates the need for restriction enzymes, DNA ligases and many in vitro manipulations required for subcloning, and allows for the rapid construction of multiple constructs for expression in multiple organisms. We demonstrate that UPS can also be used to transfer whole libraries into new vectors. Additional adaptations are described, including directional PCR cloning and the generation of 3' end gene fusions using homologous recombination in Escherichia coli. CONCLUSIONS:. Together, these recombination-based cloning methods constitute a new comprehensive approach for the rapid and efficient generation of recombinant DNA that can be used for parallel processing of large gene sets, a feature that will facilitate future genomic analysis.     

Thin-Film Encapsulated RF MEMS Switches

A wafer-level thin-film encapsulation process has been demonstrated to package radio-frequency (RF) microelectromechanical systems (MEMS) switches in this paper. Individual shunt capacitive switches were packaged in a ~1nL inorganic enclosure with process temperatures not exceeding 300 degC. A shell covering the switch consisted of 10 nm of sputtered alumina and 1.67 mum of sputtered silicon nitride dielectric film. The switch and dielectric shell were simultaneously wet-released through access channels in the shell. Following release, access channels were sealed with 10 nm of sputtered alumina and 2-4 mum of either plasma-enhanced chemical vapor deposited silicon dioxide or silicon nitride. Electromagnetic simulation and RF test results before and after sealing show minimal RF degradation of switch performance. Before sealing, the insertion loss and isolation at 10 GHz averaged 0.12 and 10.7 dB, respectively. After sealing, the same devices had an average insertion loss and isolation of 0.12 and 10.1 dB, respectively. Complete characterization of the package atmosphere was not completed due to challenges in assessing nanoliter-scale volumes     

Smart radiation sensor management

We developed two radiation mapping algorithms that can handle different situations based on prior information of the search area. The algorithms were developed in the framework of model-driven measurement, where a world model was used to drive measurement collection, and measurements were used to update the world model.We developed and experimentally tested a robotic implementation of two Bayesian-based radiation mapping strategies in two dimensions, using a commercially available desktop mobile robot fitted with a CsI radiation sensor. Our approach for implementing the Bayesian radiation mapping algorithms was to drive the robot over each segment of the search area, in real time, according to the radiation counts collected by the sensor. Future research directions include extensions to three-dimensional mapping; exploring and characterizing the tradeoffs between time efficiency, map confidence level, and utilization of prior knowledge information; as well as the implementation of Bayesian statistics for the online update of the world model.     

第三代无线通信系统的设计与验证

首先讨论传统的设计方法在设计无线通信系统物理层基带部分时的弊端。然后展示一个具有可行性的设计流程，它基于使用信号处理工作系统（ＳＰＷ）作为系统和硬件工程师的通用设计平台。     

Preparation and characterisation of silica‐based nanoparticles for cisplatin release on cancer brain cells

In the present work, the preparation, characterisation, and efficiency of two different silica nanostructures as release vehicles of Cisplatin are reported. The 1‐hexadeciltrimethyl‐ammonium bromide templating agent was used to obtain mesoporous silica nanoparticles which were later loaded with Cisplatin. While sol–gel silica was very fast prepared using an excess of acetic acid during the hydrolysis–condensation reactions of tetraethylorthosilicate and at the same time the Cisplatin was added. Several physicochemical techniques including spectroscopies, electronic microscopy, X‐ray diffraction, N₂ adsorption–desorption were used to characterise the silica nanostructures. An in vitro Cisplatin release test was carried out using artificial cerebrospinal fluid. Finally, the toxicity of all silica nanostructures was tested using the C6 cancer cell line. The spectroscopic results showed the suitable stabilisation of Cisplatin into the two different silica nanostructures. A large surface area was obtained for the mesoporous silica nanoparticles, while low areas were obtained in the silica nanoparticles. Cisplatin was released faster from mesoporous silica channels than from inside of aggregates nanoparticles silica. Cisplatin alone, as well as, cisplatin released from both silica nanostructures exerted a toxic effect on cancer cells. In contrast, both silica structures without the drug did not exert any toxic effect.Inspec keywords: cellular biophysics, desorption, adsorption, biomedical materials, sol‐gel processing, silicon compounds, cancer, toxicology, nanofabrication, brain, condensation, mesoporous materials, nanoparticles, X‐ray diffraction, nanomedicine, drugs, aggregates (materials)Other keywords: mesoporous silica channels, silica‐based nanoparticles, cancer brain cells, silica nanostructures, 1‐hexadeciltrimethyl‐ammonium bromide, mesoporous silica nanoparticles, sol‐gel silica, C6 cancer cell line, in vitro cisplatin release test, C6 cancer cell line, acetic acid, hydrolysis‐condensation reactions, tetraethylorthosilicate, physicochemical techniques, electronic microscopy, X‐ray diffraction, N₂ adsorption‐desorption, artificial cerebrospinal fluid, toxicity, toxic effect, N₂ , SiO₂      

Morphosynthesis and morphology characterization of aniline and aniline/Laponite films

We report on morphosynthesis techniques that have been employed to tune polyamine film nanoarchitectures and on their resulting morphologies. Specific layers discussed include films of aniline/Laponite clay and aniline solution processed with V₂O₅ catalyst. Synthesis approaches examined include films generated in-situ (glass templating), solution based drop casting, and mechanochemical grinding. Surface topography results suggest that these approaches provide dimensionality control of the polyaniline morphology. Surface images of the mechanochemically ground polyaniline/Laponite nanocomposite layer reveal interfacial contact which is promising for potential heterojunction solar cell designs.     

Quality of life: Expanding the scope of clinical significance.

Clinical researchers have turned their attention to quality of life assessment as a means of broadening the evaluation of treatment outcomes. This article examines conceptual and methodological issues related to the use of quality of life measures in mental health. These include the lack of a good operational definition of the construct, the use of subjective vs objective quality of life indicators, and the nature of the relationship between symptoms and quality of life judgments. Of special concern is the ability of quality of life measures to detect treatment-related changes. The authors review the application of quality of life assessment across diverse patient groups and therapies and provide recommendations for developing comprehensive, psychometrically sophisticated quality of life measures. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Synthesis,characterization, photocatalytic evaluation,and toxicity studies of TiO2–Fe3+ nanocatalyst

Based on our previous work on the green preparation of Ag–TiO₂ photocatalyst with bactericidal activity under visible light, we extended our studies to the synthesis of TiO₂–Fe³⁺ materials with enhanced photocatalytic activity for the degradation of recalcitrant organic pollutants in water. TiO₂–Fe³⁺ nanopowders were synthesized using a robust, environmentally friendly procedure. Established amounts of Fe(NO₃)₃·9H₂O and titanium tetraisopropoxide (TTIP) were mixed using glacial acetic acid as solvent. Hydrolysis of TTIP–Fe³⁺ was accomplished using a 30 % (W/V) Arabic gum aqueous solution. TiO₂–Fe³⁺ nanopowders were obtained by thermal treatment at 400 °C. In order to elucidate the structure of these photocatalysts, microscopic and spectroscopic characterization techniques were applied. The high resolution transmission electron microscopy (HRTEM) analysis indicated the presence of uniformly distributed particles with average particle size of about 9 nm. According to the HRTEM lattice fringes, ring pattern, and selected area electron diffraction pattern, the crystalline part of the samples consists of anatase (PDF 01-086-1157 with the lattice constant of 3.7852, 9.5139 Å and 90°) as dominant phase. X-ray photoelectron spectroscopy (XPS) was applied to determine the oxidation state of iron. The XPS provides evidence for Fe³⁺ surface species in the TiO₂–Fe³⁺ composite. Complete degradation of aqueous solutions (20 ppm) of methylene blue and/or methyl orange was accomplished after 4 h of treatment using 150 mg of TiO₂–Fe³⁺/150 mL of dye solution. The in vitro toxicity of the materials was tested. The materials showed no toxicity against human red blood cells.