铝液对铸轧辊辊套表面裂纹形成及扩展的影响

用OM、SEM及能谱仪对辊套表面裂纹和试件断口形貌进行了观察，并采用X-ray衍射仪对裂纹中铝的化合物进行了分析。结果表明，辊套表面裂纹起源于机械加工产生的微缺陷，表面裂纹方向与切削痕迹方向相同；而铝液是从表面裂纹形核处沿开裂面挤入裂缝中；在裂纹尖端没有发现铁铝化合物；高温铝液对辊套表面裂纹形成及扩展影响不大。     

超声波条件下除油技术的研究

在超声波条件下,研究确定了除油技术的清洗介质配方及运行条件,并对超声波、化学(声化)协同除油机理进行了分析讨论.研究结果表明,在声化条件下,研究确定的低浓度的碱性除油介质可在较低温度下,快速有效去除试样表面的油污;升高清洗液温度,可提高除油效率.     

An experimental investigation into soft-pad grinding of wire-sawn silicon wafers

Silicon is the primary semiconductor material used to fabricate microchips. A series of processes are required to manufacture high-quality silicon wafers. Surface grinding is one of the processes used to flatten wire-sawn wafers. A major issue in grinding of wire-sawn wafers is reduction and elimination of wire-sawing induced waviness. Results of finite element analysis have shown that soft-pad grinding is very effective in reducing the waviness. This paper presents an experimental investigation into soft-pad grinding of wire-sawn silicon wafers. Wire-sawn wafers from a same silicon ingot were used for the study to ensure that these wafers have similar waviness. These wafers were ground using two different soft pads. As a comparison, some wafers were also ground on a rigid chuck. Effectiveness of soft-pad grinding in removing waviness has been clearly demonstrated.     

用于气体保护焊的自动混气设备

介绍了一种用于焊接现场的气体保护焊的自动混气设备，该设备能精确控制气体混合比例。设备主要由气体传输、气体混合、信号检测和电气控制几大部分组成。计算机适时采集、显示混合气体的混合比例、输出压力、气体湿度等信息，超限发出声光报警。混气设备通过气体分析仪、比例阀和计算机形成闭环控制，从而实现气体混合比例的精确控制。     

碳氮共渗提高空心圆柱滚子轴承寿命的研究

通过GCr15钢碳氮共渗,在表层获得大量的残余奥氏体。磨损中,马氏体组织剥落,残余奥氏体则成小岛状,进而在表面迁移发生形变诱发马氏体相变,使耐磨性得以提高。同时,共渗在空心滚子内表面造成的压应力对改善弯曲疲劳性能有利。     

丙烯酸树脂在医用黏合剂中的应用

讨论了丙烯酸树脂在医用黏合剂中的应用及进展。     

气相色谱——质谱法对土壤中多种农药残留的测定方法

用GC -MS法测定土壤中的农药残留物 ,快速准确 ,回收率 83 %～ 112 %,平均变异系数在 4.8%～ 15 .2 %之间。为科学监测、合理利用土壤资源提供了依据     

Preparation of fluoroacrylate nanocopolymer by miniemulsion polymerization used in textile finishing

Latex based on fluoroacrylate (TAN) and other comonomers was prepared via miniemulsion polymerization in the presence of stearyl trimethyl ammonium chloride (STAC) and 2, 2′‐azobis (2‐amidinopropane) dihydrochloride (ABAP) as a water soluble initiator. Light transmittance studies demonstrated that the light transmittance of prepared emulsions increases with the amount of TAN, STAC, cosolvent DPM, and hydrophobe DM. Given suitable reaction temperature and quantities of TAN, STAC, DPM, and DM, a copolymer emulsion of fluoroacylate with a particle size of 50 nm was produced. The water repellency tested on polyester fabrics displayed greater effectiveness than that of commercial products with higher fluorine content. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1466–1472, 2004     

西门子CP340与RKC温控仪表的ASC Ⅱ码通信

介绍西门子CP340与RKC温控仪表的ASCⅡ码通信方法，采用轮询方式访问RS-485网络上的每块温控仪表。使橡胶挤出机的温度控制系统处于西门子PLC系统管理之中，方便橡胶挤出机的温控系统的现场维护和监控。     

氧化铝增强无机硅酸锌涂层的电化学阻抗谱研究

无机硅酸锌涂层是一种广泛使用的钢铁重防腐涂层。采用在涂料填料中加入氧化铝的方法可以得到具有更好耐磨性能的富锌涂层。本实验研究利用电化学阻抗谱法(EIS)研究了氧化铝的加入对涂层腐蚀防护性能的影响,结果表明氧化铝颗粒的加入使涂层的腐蚀防护性能略有提高。