Color displays and flexible displays using quick‐response liquid‐powder technology for electronic paper

Abstract— Color displays and flexible displays that use electronic liquid powder have been developed. Novel types of color displays using either a colored powder or a color filter are discussed. We have also developed a flexible display with low‐cost substrate films with a high‐throughput roll‐to‐roll manufacturing method. These technologies enable a QR‐LPD to be widely used as an electronic‐paper display.     

Role of tungsten in promoting selective reduction of NO with CO over Ir/WO3–SiO2 catalysts

Catalytic hydrogenation of naphthalene to decalin was studied over a carbon-supported rhodium catalyst in supercritical carbon dioxide solvent at 333 K, and the results were compared with those in an organic solvent. cis-, trans-Decalin and tetralin were formed from the beginning of the reaction in supercritical carbon dioxide. Higher concentration of hydrogen in carbon dioxide solvent and on the active site, and also the suppression of desorption of partially hydrogenated tetralin molecules from the active site would be responsible for higher selectivity to cis-decalin in supercritical carbon dioxide than that in an organic solvent.     

日本移动服务业的过去和将来

分别对日本三代移动通信系统的发展进行了描述。第一代系统致力于实现随时、随地的通话，第二代系统的特征是基于语音的附加服务、低速的移动计算、移动因特网和位置服务，第三代系统将以基于视频的全球范围内高速多媒体服务和移动IT为特征。在未来的后3G系统中，这些服务都将以虚拟永远在线的方式无缝、高速地普遍提供。     

Immunomagnetic flow cytometric detection of staphylococcal enterotoxin B in raw and dry milk

A rapid and sensitive method for detection of staphylococcal enterotoxin B (SEB) in raw and dry milk samples with the use of antibody-based immunomagnetic separation (IMS) in conjunction with flow cytometry (FCM) was developed. Sheep anti-SEB immunoglobulin G (IgG) was immobilized on Dynabeads M-280. The SEB initially binds to the capturing antibody, which is bound on the magnetic beads. The rabbit anti-SEB IgG binds to the captured toxin and is further labeled with a Cy5-labeled goat anti-rabbit IgG antibody. The percentage of the beads that were fluorescent was measured by FCM. FCM was carried out for 1 min, and the data obtained were expressed as histograms for particle size (forward light scatter) and histograms for fluorescence intensity. A peak corresponding to the magnetic beads was clearly distinguished from a peak derived from contaminating particles in the sample solution. In the absence of SEB, about 10% of the beads emitted fluorescence. The percentage of fluorescent beads and the fluorescence intensity increased with increasing SEB concentrations. For this IMS-FCM assay, the lower limits of detection for SEB were estimated to be 0.01 and 0.25 ng/ml for buffer and milk samples, respectively.     

Specific heat anomaly of nonstoichiometric U4O9−y

A λ-type specific heat anomaly of U₄O_9?y, which occurs slightly above room temperature, was measured for the samples with different O/U ratios. The transition temperatures obtained from the peak of λ-type specific heat anomaly are in fairly good agreement with the data by X-ray diffraction and electrical conductivity measurements. The entropy increment for the transition was obtained to be 0.46 e.u. for UO_2.250, 0.56 e.u. for UO_2.240 and 0.70 e.u. for UO_2.228, depending on O/U ratio. On the basis of the entropy change with O/U ratio, the mechanism of the phase transition is discussed. The entropy change due to the phase transition is mainly divided into two terms: one is due to the order-disorder rearrangement of U(IV) and U(V) ions,the other is associated with the displacement of oxygens ions. The former term is estimated to be rather smaller than the entropy change calculated by the Bragg-Williams approximation, and the latter is calculated using the X-ray diffraction data with the assumption of the Willis model.     

Effect of anisotropic scattering in neutronics analysis of BWR assembly

The anisotropic scattering effect to keff is studied for UO₂ and MOX fueled BWR assemblies. The anisotropic scattering effect increases the assembly k_∞ by 0.44% Δk for the UO₂ assembly with 0% void fraction, and by 0.21% Δk for the MOX assembly with 0% void fraction. This is because the anisotropic scattering effect flattens the intra-assembly thermal flux, and the absorption rate in the surrounding water gap is decreased, but the absorption rates in the MOX fuel rods are increased compared to the UO₂ rods. Therefore, the total decrease in absorption rates in the UO₂ assembly is relatively large, and the k_∞ is increased in the UO₂ assembly. The dependence of the anisotropic scattering effect on the void fraction is investigated, and the significant difference of 0.62% Δk/k is found for the 0% and the 80% void fractions. The BWR assemblies with Gd rods are also considered. Furthermore, the usefulness of the transport cross section is investigated, and it is found that the transport cross section gives reasonable anisotropic scattering effect, though not satisfactory.     

Diffusion process of amino acids in polymer supports for solid‐phase peptide synthesis as studied by pulsed‐field‐gradient spin‐echo proton nuclear magnetic resonance

The diffusion coefficient (D) values of tert‐butyloxycarbonyl‐glycine, tert‐butyloxycarbonyl‐L ‐tryptophan, tert‐butyloxycarbonyl‐L ‐phenylalanine (Boc‐Phe), and 9‐fluorenylmethoxycarbonyl‐L ‐phenylalanine in Merrifield polystyrene (MPS) gels, poly(ethylene glycol)‐grafted polystyrene (PEG–PS) gels, and crosslinked ethoxylate acrylate (CLEAR) gels, as used in solid‐phase peptide synthesis, were determined by the pulsed‐field‐gradient spin‐echo ¹H‐NMR method. From these experimental results, it was found that the amino acids in MPS gels, PEG–PS gels, and CLEAR gels with N,N‐dimethylformamide‐d₇ (DMF‐d₇) as a solvent had multidiffusion components within a measurement timescale of 10 ms. The D value of Boc‐Phe in polystyrene gels (1% divinylbenzene crosslinked) with tetrahydrofuran‐d₈ was much larger than that in the same gels with DMF‐d₇. Furthermore, the required time in which an amino acid transferred from a reactive site to a reactive site was estimated, within which the solvents and amino acids in the polymer supports diffused in the swollen beads.© 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 413–421, 2003     

Sesamin is a potent and specific inhibitor of Δ5 desaturase in polyunsaturated fatty acid biosynthesis

Incubation with sesame oil increases the mycelial dihomo-γ-linolenic acid content of an arachidonic acid-producing fungus,Mortierella alpina, but decreases its arachidonic acid content [Shimizu, S., K. Akimoto, H. Kawashima, Y. Shinmen and H. Yamada (1989)J. Am. Oil Chem. Soc. 66, 237–241]. The factor causing these effects was isolated and identified to be (+)-sesamin. The results obtained in experiments with both a cell-free extract of the fungus and with rat liver microsomes demonstrated that (+)-sesamin specifically inhibits Δ5 desaturase at low concentrations, but does not inhibit Δ6, Δ9 and Δ12 desaturases. Kinetic analysis showed that (+)-sesamin is a noncompetitive inhibitor (K_i for rat liver Δ5 desaturase, 155 μM). (+)-Sesamolin, (+)-sesaminol and (+)-episesamin, also inhibited only Δ5 desaturases of the fungus and liver. These results demonstrate that (+)-sesamin and related lignan compounds present in sesame seeds or its oil are specific inhibitors of Δ5 desaturase in polyunsaturated fatty acid biosynthesis in both microorganisms and animals. On leave from Suntory Ltd.     

Thermodynamics of O,N, and S in liquid Fe equilibrated with CaO-AI2O3-MgO slags

Nitrogen and S distribution ratios between CaO-Al₂O₃-MgO slags and liquid Fe were measured at 1873 K as a function of Al (or Mg, Ca) content in metal, using CaO, MgO, and A1₂O₃ crucibles. Based on the results for the solubility product of MgO, the equilibrium constant,K _Mg , for the reaction MgO =Mg +O and the first-order interaction parameter,e _O ^Mg (e _Mg ^O ), were estimated to be logK _Mg = -7.8 ± 0.2 ande _O ^Mg = -190 ± 60 (e _Mg ^O = -290 ± 90), respectively. The activities of A1₂O₃ at the slag compositions double-saturated with CaO/MgO, MgO/ MgO A1₂O₃, and MgO Al₂O₃/CaO 2A1₂O₃ components were obtained from the S distribution ratios between slag and metal, coupled with the reported values of sulfide capacities. Nitride capacities were also estimated from the N distribution ratios and the activities of A1₂O₃.     

Alternative technologies for biotechnological fuel ethanol manufacturing

The challenges of implementing biorefineries on a global scale include socioeconomic, financial, and technological constraints. In particular, the development of biorefineries is tightly linked to the continued availability of fermentation raw materials. These constraints can be relaxed by the use of diverse raw materials, while advances that confer higher flexibility would enable biotechnological plant managers to swiftly react to volatile markets. In conventional processes, Saccharomyces cerevisiae grows on a relatively limited range of substrates, and produces only a single product—ethanol. Given the observed maturity of the S. cerevisiae fermentation technology, alternatives to baker's yeast may be needed to tip the economic balance in favour of biotechnological ethanol. These alternative fermentation technologies may allow a greater diversity of substrates to be used to produce an individually tailored mix of ethanol and other chemicals. Copyright © 2007 Society of Chemical Industry