Polarimetric Characteristics of sea ice in the sea of Okhotsk observed by airborne L-band SAR

The Phased-Array L-Band SAR (PALSAR) aboard the Advanced Land Observing Satellite (ALOS) is capable of globally acquiring fully polarimetric data. In order to confirm the ability of L-band polarimetric synthetic aperture radar (SAR) to investigate sea ice before the ALOS launch, we conducted a field experiment using an airborne Polarimetric and Interferometric SAR (Pi-SAR) in the Sea of Okhotsk in 1999. This paper presents the analyzed results of data acquired in that experiment. The extracted polarimetric parameters of several ice types suggested that polarimetric coherences and phase differences between right-right (RR) and left-left (LL) are good candidates for discriminating ice types. The polarimetric anisotropy as well as the beta angle of the first eigenvector calculated in the polarimetric decomposition procedure are alternative parameters that are sensitive to ice type differences. Due to the low depolarization characteristics of open water, it could be discriminated from sea ice by scattering entropy in all incidence angle ranges. From the relation between ice thickness and the polarimetric parameters, we found that backscattering coefficients and vertical (VV) to horizontal (HH) backscattering ratio are highly correlated with ice thickness. Since the ratio is sensitive to ice surface dielectric constants, a simple simulation using the integral equation method surface model was conducted by using the physical parameters of typical sea ice. A two-dimensional ice thickness map was derived from an empirical relation between the VV-to-HH backscattering ratio and ice thickness.     

Radiation damage induced in Si photodiodes by high-temperature neutron irradiation

Results are presented of a detailed study of the effects of high-temperature 4-MeV neutron irradiation on the performance degradation of Si pin photodiodes together with the radiation-induced defects, observed by deep level transient spectroscopy (DLTS). It was found that the dark current increases after irradiation, while the photocurrent decreases. After irradiation, two majority electron capture levels with (E _c–0.22 eV) and (E _c–0.40 eV) were induced in the n-Si substrate, while one minority hole capture level with (E _v+0.37 eV) was found. Additionally, the degradation of the device performance and the introduction rate of the lattice defects decreases with increasing irradiation temperature. For a 250 °C irradiation, the reduction of the reverse current is only 20% of the starting value. This result suggests that the creation and recovery of the radiation damage proceeds simultaneously at high temperatures.     

An investigation of induced voltages to an underground gas pipeline from an overhead transmission line

This paper investigates induced voltage characteristics from an overhead transmission line by applying a method of modeling of induced voltages proposed by the authors. EMTP simulation results obtained by the modeling method agree with analytical results obtained from a well‐known formula. The induced voltages are significantly dependent on the configuration of the overhead line. A horizontal line induces the largest voltage in a gas pipeline, and the voltage induced by a vertical twin‐circuit line is about 20% smaller than that induced by a vertical single‐circuit line. The method is applied to a real pipeline system and the simulation results show reasonable agreement with field test results. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 164(1): 43–51, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20465     

Catalytic decomposition of biomass tars with iron oxide catalysts

Catalytic gasification of wood (Cedar) biomass was carried out using a specially designed flow-type double beds micro reactor in a two step process: temperature programmed non-catalytic steam gasification of biomass was performed in the first (top) bed at 200–850 °C followed by catalytic decomposition gasification of volatile matters (including tars) in the second (bottom) bed at a constant temperature, mainly 600 °C. Iron oxide catalysts, which transformed to Fe₃O₄ after use possessed catalytic activity in biomass tar decomposition. Above 90% of the volatile matters was gasified by the use of iron oxide catalyst (prepared from FeCl₃ and NH_3aq) at SV of 4.5 × 10³ h^?1. Tar was decomposed over the iron oxide catalysts followed by water gas shift reaction. Surface area of the iron oxide seemed to be an important factor for the catalytic tar decomposition. The activity of the iron oxide catalysts for tar decomposition seemed stable with cyclic use but the activity of the catalysts for the water gas shift reaction decreased with repeated use.     

Changes in the thermomechanical behavior of epoxy glasses under the state of strain aging

Changes in thermomechanical behavior with structural relaxation taking place in epoxy glasses were studied. Differential scanning calorimetry measurements and thermostimulated strain recovery tests were performed for specimens deformed and then aged under fixed strain. In the course of heating, the specimens started to absorb thermal energy, whereas plastic strain was still stable. At higher temperatures, plastic strain started recovery, which was accompanied by exothermic behavior of the specimen. With an increase in the aging duration, the endothermic peak signified and moved to a higher temperature. These results indicated that the longer the aging duration was, the harder the plastic strain and strain energy were frozen in the glassy structure. This freeze‐strain phenomenon was observed for crosslinked epoxy glass, as well as polymeric glasses with linear molecular structures, aged under strain. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and applications of fluoroalkyl end-capped cooligomers having fullerene and mixed fullerenes in the main chain

Fluoroalkanoyl peroxides reacted with FULLERENES [fullerene (C₆₀) and commercially available fullerenes (Nanom Mix^TR and Nanom Black^TR)] and radical polymerizable comonomers such as acrylic acid, N,N-dimethylacrylamide, N-(1,1-dimethyl-3-oxobutyl)acrylamide, and acryloylmorpholine to afford fluoroalkyl end-capped cooligomers having FULLERENES in the main chain under very mild conditions. Fluoroalkyl end-capped Nanom Mix and Nanom Black cooligomers thus obtained were found to exhibit a similar solubility to that of the corresponding fluoroalkyl end-capped cooligomers having fullerene in the main chain. These fluorinated FULLERENES cooligomers were found to form the nanometer size-controlled self-assembled cooligomeric aggregates in aqueous solutions. These fluoroalkyl end-capped FULLERENES cooligomers were more effective for solubilizing fullerene, Nanom Mix and Nanom Black into water, compared to those of the corresponding fluoroalkyl end-capped homooligomers having no FULLERENES in the main chain. Fluoroalkyl end-capped fullerene- and Nanom Mix-acrylic acid cooligomers were found to exhibit fluorescence spectra related to fullerene and Nanom Mix in cooligomers, respectively, in aqueous solutions. Additionally, these fluorinated fullerene- and Nanom Mix-acrylic acid cooligomers were able to increase chemiluminescence intensity related to luminol, effectively, compared to the corresponding fluorinated acrylic acid homooligomers.     

Frequency response function of magnetic bearings using high-temperature superconductor

A high-temperature superconductor YBa₂Cu₃O_7-x with strong pinning force has allowed stable magnetic suspension with no control to be developed. Two types of superconducting magnetic bearings (SMB) using YBCO and permanent magnet were assembled. The two types are radial and axial. The dynamic stiffness of each SMB as it was cooled down under a magnetic field by liquid nitrogen was measured both radially and axially. As a result, it was found that the spring constants of these SMBs were almost as large as a practically desirable value; however, their damping coefficients were lower than the practical level. These findings are useful as one of the data bases for development of an optimum SMB design to support the weight of rotors in an axial direction.     

Radiation tolerance of type IIa synthetic diamond detector for 14 MeV neutrons

Radiation tolerance of a type IIa synthetic diamond detector was examined from irradiation of mono-energetic 14 MeV neutrons. Measurements of I–V (current–voltage) characteristics and energy spectrum for 5.486 MeV alpha particles were performed after neutron irradiation. In the I–V characteristics measurement, enhancement of rectification was observed after neutron irradiation of up to 2.0 × 10¹² n/cm². Concurrently with the enhancement of rectification, significant decrease in signal amplitude was observed in energy spectrum measurement for alpha particles. It is considered that these changes were due to increase in the concentration of defects acting as shallow energy levels in the forbidden band. For neutron irradiation of higher than 1.6 × 10¹³ n/cm², weakening of the rectification characteristics and recovery of the signal amplitude were observed. These changes imply that deep energy levels, which were also considered to be introduced by defects, were dominant and weakened the effects of the shallow energy levels. Increase in the concentration of the deep trapping levels resulted in gradual decrease of the signal amplitude and degradation in the energy resolution. The peak for the alpha particles was obtained up to 5.5 × 10¹³ n/cm².