Health-promoting effects in the gut and influence on lipid metabolism of Himanthalia elongata and Gigartina pistillata in hypercholesterolaemic Wistar rats

The intake of Himanthalia elongata and Gigartina pistillata from the Spanish Atlantic coasts was evaluated in Wistar rats. Both seaweed diets showed higher (p < 0.001) faecal excretion. Colonic fermentation increased (p < 0.001) total short-chain fatty acids (SCFAs) in Himanthalia-fed rats due to the higher (p < 0.001) levels of acetic, propionic and butyric acids. The intake of Gigartina increased (p < 0.001) propionic acid and decreased (p < 0.001) butyric acid. The apparent absorption and true retention of calcium and magnesium enhanced (p < 0.05) with Himanthalia diet, while Gigartina produced no significant effect. The serum concentration of HDL-C increased (p < 0.01), triglycerides (TGL) decreased (p < 0.001) and bile acids diminished (p < 0.001) in faeces of Himanthalia-fed rats. The Gigartina diet produced a decrease (p < 0.001) in TGL, total cholesterol (p < 0.01) and LDL-C (p < 0.05) in serum and reduced TGL in liver (p < 0.001). Thus, both seaweeds improved the lipid profile, and Himanthalia increased SCFA production and the absorption and retention of Ca and Mg as a result of the gut fermentation.     

Effect of different treatments on the microstructure and functional and pasting properties of pigeon pea (Cajanus cajan L.), dolichos bean (Dolichos lablab L.) and jack bean (Canavalia ensiformis) flours from the north‐east Argentina

The effect of germination (G; 5 days), soaking‐cooking (SC; 6 h–20 min, 6 h–40 min, 6 h–60 min) and microwave (M; 50%, 70%, 100%) treatments on pigeon pea (PP), dolichos bean (DB) and jack bean (JB) seeds was studied. Microstructure of seeds and functional (protein solubility, water‐holding capacity, oil‐holding capacity, emulsion stability) and pasting properties of flours were determined. Germination and microwave treatments modified the protein matrix of cotyledon cells preserving the shape of the starch granule, whereas the SC treatment (6 h–60 min) affected both. The soaking‐cooking is the most influential treatment on the functional properties of PP, DB and JB flours, as increased water absorption capacity (73–96%), decreased protein solubility (>80%) and the tendency to retrogradation of amylose (69–85%) also improved emulsion stability.     

Identification of unbalance forces by metaheuristic search algorithms

This paper discusses the identification of parameters in rotary systems, namely, the unbalance magnitude, phase and position in the rotor system. These parameters can be identified using the measured orbits in the hydrodynamic bearings. The oil film forces are evaluated in the different positions of the orbit of the journal and are applied to the model of the shaft. The model, integrated in time domain, allows with an assumed unbalance, to simulate the orbits. The objective function is basically the difference between measured and simulated orbits, and its minimum corresponds to the identified unbalance amount, phase and position along the shaft. With respect to traditional model based identification procedures, this approach using oil film forces instead of oil film linearized stiffness and damping coefficients, and unfiltered orbits instead of 1X vibration components is suitable to deal with non-linear behaviour of the system.     

Study of shrinkage porosity in spheroidal graphite cast iron

This study aims at identifying the relationship between the shrinkage cavities and the solidification structure in spheroidal graphite cast iron. Cast samples specially designed to contain shrinkage cavities were used. The solidification macrostructure was revealed using the Direct Austempering After Solidification method, while the solidification microstructure was revealed by using colour etching. At the midsection of the pieces, the shrinkage cavities and the solidification structure were observed jointly. The study showed that the classification of shrinkage porosity found in literature does not correspond to the ductile iron solidification model recognized by most of the scientific community. Early solidification models, and therefore shrinkage formation mechanisms, were proposed in instances when there was not a thorough knowledge of the morphology of the solid phases during solidification. Nowadays, defects formation mechanisms can be described with higher accuracy. Therefore, an updated classification of shrinkage porosity for spheroidal graphite iron is proposed.     

Mechanosynthesis of the multiferroic cubic spinel Co2MnO4: Influence of the calcination temperature

Multiferroic materials showing magnetoelectric coupling are required in various technological applications. Many synthetical approaches can be used to improve the magnetic and/or electrical properties, in particular when the materials exhibit cationic valence fluctuations, as in the Co₂MnO₄ cubic spinel. In this compound, Co and Mn ions are in competition at the tetrahedral and octahedral positions, depending on their various oxidation states. The Co₂MnO₄ was prepared following two techniques: by a soft chemical route based on a modified polymer precursor method, and by a mechanoactivation route. Both approaches yield polycrystalline powders, but their crystallites sizes and particles morphologies differ as a function of the calcination conditions. The magnetic characterization (ZFC/FC cycles, ordering temperatures, ferromagnetic coercive fields and saturation magnetizations) showed that the synthesis procedure influenced the physical properties of Co₂MnO₄ mainly through the size of the magnetic domains, which play an important role on the magnetic interactions between the Co/Mn cations.     

Antimicrobial and antibiofilm activities of procyanidins extracted from laurel wood against a selection of foodborne microorganisms

This study aimed to evaluate the antimicrobial and antibiofilm activities of two procyanidins isolated from an ethyl acetate extract of laurel wood against a selection of foodborne pathogens. The analysis of the extract by HPLC–DAD/ESI–MS allowed us to detect the presence of two procyanidins, which were selectively isolated and identified by chromatographic and spectroscopic means as cinnamtannin B‐1 ( 1 ) and procyanidin B‐2 ( 2 ). Procyanidins 1 and 2 exhibited two biological activities: inhibition of bacterial growth at high concentrations and prevention of biofilm formation at lower concentrations. Synergistic effect was also detected when both compounds were tested in combination against Listeria monocytogenes. Significant effects were also detected on disruption of preformed biofilm. The ability of procyanidins to inhibit microbial growth and biofilm formation and to synergistically work with each other may stimulate a market as natural food preservatives, and/or natural sanitisers for processing equipment where foodborne pathogens reside.     

Comparative study of chelating ion exchange resins for the recovery of nickel and cobalt from laterite leach tailings

Commercially available chelating resins with the iminodiacetate functional group have been evaluated for their suitability for the adsorption of nickel and other metal ions by a resin-in-pulp process from the tailings of a pressure acid leach process for nickel laterites. The Amberlite IRC 748 and TP 207 MonoPlus resins were found to be the most suitable in terms of loading capacity for nickel and kinetics of adsorption. The resin with the highest nominal capacity was observed to adsorb less nickel as a result of the adsorption of greater amounts of the impurity ions. The equilibrium loading for nickel on the preferred resin was found to be similar from the ammonium and protonated form of the resin although the kinetics of adsorption is greater when the resin is initially in the ammonium form. A study of the kinetics of the loading of nickel and cobalt from pulp has shown that the rate can be described in terms of a first-order approach to equilibrium. The optimum pH for adsorption was found to be in the range 4 to 5 as this pH is high enough to maximize the adsorption of nickel and cobalt while preventing precipitation of nickel and cobalt as hydroxides from the pulp. A method for minimizing the competition from more strongly loaded ions such as iron(III) and chromium(III) which are present in the pulp was also developed in the initial laboratory phase of the study.     

A voltage controlled CMOS current divider with linear characteristic

A compact voltage controlled CMOS current divider is presented. Differently from previous implementations, exploiting the MOSFET translinear characteristics in subthreshold region, the proposed circuit is based on devices operating from moderate to strong inversion. An input current linearity range of nearly a decade is obtained by compensating for the deviations from the ideal drain current square-law approximation through an original empirical approach. The circuit is suitable for use as a building block in analog multipliers and for transconductor continuous tuning. The effectiveness of the proposed configuration is demonstrated by means of electrical simulations, performed on a prototype designed with a commercial process. The robustness of the linearization algorithm with respect to temperature variations is proven.