Internet-scale content mediation in information-centric networks

Given that the vast majority of Internet interactions relate to content access and delivery, recent research has pointed to a potential paradigm shift from the current host-centric Internet model to an information-centric one. In information-centric networks, named content is accessed directly, with the best content copy delivered to the requesting user given content caching within the network. Here, we present an Internet-scale mediation approach for content access and delivery that supports content and network mediation. Content characteristics, server load, and network distance are taken into account in order to locate the best content copy and optimize network utilization while maximizing the user quality of experience. The content mediation infrastructure is provided by Internet service providers in a cooperative fashion, with both decoupled/two-phase and coupled/one-phase modes of operation. We present in detail the coupled mode of operation which is used for popular content and follows a domain-level hop-by-hop content resolution approach to optimally identify the best content copy. We also discuss key aspects of our content mediation approach, including incremental deployment issues and scalability. While presenting our approach, we also take the opportunity to explain key information-centric networking concepts.     

Palladium‐ and Copper‐Catalyzed Site Selective Monoamination of Dibromobenzoic Acid

The carboxylate anion has been used as a directing group in the aromatic amination of electronically equivalent aryl bromides to afford selective ortho‐substituted derivatives (>99:1 selectivity; 60–80% yield) in the case of copper(I) catalysis. The solvent, base and equivalents of base were important factors in the success of this reaction. Complementary selectivity was achieved with palladium catalysis where the para‐substituted derivatives were produced selectively (>99% selectivity, 70–80% yield).     

Reticulated Organic Photovoltaics

This paper shows how the self‐assembled interlocking of two nanostructured materials can lead to increased photovoltaic performance. A detailed picture of the reticulated 6‐DBTTC/C₆₀ organic photovoltaic (OPV) heterojunction, which produces devices approaching the theoretical maximum for these materials, is presented from near edge X‐ray absorption spectroscopy (NEXAFS), X‐ray photoelectron spectroscopy (XPS), Grazing Incidence X‐ray diffraction (GIXD) and transmission electron microscopy (TEM). The complementary suite of techniques shows how self‐assembly can be exploited to engineer the interface and morphology between the cables of donor (6‐DBTTC) material and a polycrystalline acceptor (C₆₀) to create an interpenetrating network of pure phases expected to be optimal for OPV device design. Moreover, we find that there is also a structural and electronic interaction between the two materials at the molecular interface. The data show how molecular self‐assembly can facilitate 3‐D nanostructured photovoltaic cells that are made with the simplicity and control of bilayer device fabrication. The significant improvement in photovoltaic performance of the reticulated heterojunction over the flat analog highlights the potential of these strategies to improve the efficiency of organic solar cells.     

The analytic solution for hydrodynamic diffraction by submerged prolate spheroids in infinite water depth

This study investigates the linear hydrodynamic scattering problem by stationary prolate spheroidal bodies and aims at providing an analytic solution for the associated boundary value problem. It extends the work of the present author on the hydrodynamics of oblate spheroidal bodies following the same procedure. The structural model under consideration is a spheroid with its polar axis greater than its equatorial diameter, subjected to the action of monochromatic incident waves. The polar axis is assumed to be perpendicular to the free surface that leads to the axisymmetric case concept. The analytic solution is sought using the method of multipole expansions constructed by employing Thorne’s formulas (Multipole expansions in the theory of surface waves. Proc Cam Philos Soc 49:707–716, 1953) that describe the velocity potential at singular points within a fluid domain with free upper surface and infinite water depth. The final stage of the solution process is the application of the zero velocity condition on the wetted surface of the spheroid. Inevitably this task requires the transformation of the involved velocity potentials, originally expressed with respect to spherical and polar coordinates, into prolate spheroidal coordinates. To this end, the appropriate addition theorems are derived, which recast Thorne’s expressions into infinite series of associated Legendre functions.     

Distributed evolutionary algorithms with hierarchical evaluation

A distributed evolutionary algorithm is presented that is based on a hierarchy of (fitness or cost function) evaluation passes within each deme and is efficient in solving engineering optimization problems. Starting with non-problem-specific evaluations (using surrogate models or metamodels, trained on previously evaluated individuals) and ending up with high-fidelity problem-specific evaluations, intermediate passes rely on other available lower-fidelity problem-specific evaluations with lower CPU cost per evaluation. The sequential use of evaluation models or metamodels, of different computational cost and modelling accuracy, by screening the generation members to get rid of non-promising individuals, leads to reduced overall computational cost. The distributed scheme is based on loosely coupled demes that exchange regularly their best-so-far individuals. Emphasis is put on the optimal way of coupling distributed and hierarchical search methods. The proposed method is tested on mathematical and compressor cascade airfoil design problems.     

Cycle time reduction by improved MRP-based production planning

The important practical problem of planning the production of large assemblies employing an MRP-based system is considered. The objective is to produce products on-time, with minimal cycle time and low work-in-process costs. The approach is based on the determination of accurate lead-time estimates and on the introduction and use of lead-time offsets in the solution methodology. An effective Lead-time Evaluation and Scheduling Algorithm (LETSA) is employed that can perform detailed backward scheduling of operations belonging to a large assembly on a given facility with an objective of minimizing the cycle time. A scaling procedure is used to account for capacity sharing effects by multiple products in a common facility. These scaled lead-time estimates are then employed by an MRP-based system to release work-orders on the shop-floor. The effectiveness of these lead-times and lead-time offsets are evaluated by simulating production using the MRP generated order release times and verifying on-time completion of the multiple assemblies in the common facility. Numerical experiments are presented to validate the performance of the approach. Optimized batch sizes for minimal work-in-process (WIP) costs can also be obtained using LETSA. Thus, the important objectives of minimizing cycle time for on-time delivery and minimizing schedule costs can be accomplished simultaneously.     

基于DIgSILENT PowerFactory实现IEC第1类风电机组的标准建模

The implementation method for the International Electrotechnical Commission(IEC) generic models of Type 1 wind turbine generator(WTG) in DIgSILENT PowerFactory is presented.The following items are described,i.e.model structure,model blocks and how to implement these blocks in the PowerFactory environment.Case studies under both normal and fault conditions are done with the implemented IEC generic models of Type 1 WTG,and dynamic responses are captured and analyzed.The case study results show that the IEC generic models of Type 1 WTG can correctly represent the performances of Type 1 WTG under both normal and fault conditions.     

Effects of retinoids on proliferation and plasminogen activator expression in a bovine mammary epithelial cell line

Effects of two natural (retinol and retinoic acid, RA) and one synthetic N-(4-hydroxyphenyl) retinamide (4-HPR) retinoids on proliferation and expression of urokinase-plasminogen activator (u-PA) by bovine mammary epithelial cells were examined. The BME-UV1 established bovine mammary epithelial cell line was used as a model system. All retinoids tested (retinol, RA and 4-HPR) were effective inhibitors of cell proliferation. When cells were cultured in the absence of fetal bovine calf serum (FBCS), inhibition occurred at concentrations as low as 1 nM for all retinoids tested. The effect of retinoids on cell proliferation was not dose-related when cells were cultured in the absence of FBCS. All retinoids (retinol, RA, 4-HPR), when used in the range 1 nM-10 microM (noncytotoxic concentrations), were equally effective and had identical inhibition patterns. Inhibition of cell proliferation by RA was apparent by 6 h and was higher after 24 h in culture. In contrast, when cells were cultured in the presence of FBCS, the effect of RA and retinol on cell proliferation was dose-related. RA and retinol inhibited cell proliferation (P<0.01) when added to the culture medium in concentrations as low as 10 nM and 100 nM, respectively. 4-HPR was inhibitory (P<0.01) in concentrations as low as 1 nM. Higher concentrations of 4-HPR in the range 1 nM-1 microM had no further effect on cell proliferation. None of the retinoids tested, when added to cultures in the presence or absence of FBCS, could completely arrest cell proliferation at noncytotoxic concentrations. RA at 1 microM inhibited (P<0.05) insulin or IGF-I-induced cell proliferation but had no effect (P>0.05) on u-PA mRNA levels or u-PA activity. Furthermore, RA inhibited cell proliferation in the presence of FBCS but had no effect (P>0.05) on u-PA mRNA levels. Thus, retinoids are effective inhibitors of bovine mammary epithelial cell proliferation and this growth inhibition does not seem to correlate with any changes in u-PA mRNA or u-PA activity.     

The interdependence of structural and electrical properties in TiO2/TiO/Ti periodic multilayers

Multilayered structures with 14–50 nm periods composed of titanium and two different titanium oxides, TiO and TiO₂, were accurately produced by DC magnetron sputtering using the reactive gas pulsing process. The structure and composition of these periodic TiO₂/TiO/Ti stacks were investigated by X-ray diffraction and transmission electronic microscopy techniques. Two crystalline phases, hexagonal close packed Ti and face centred cubic TiO, were identified in the metallic-rich sub-layers, whereas the oxygen-rich ones comprised a mixture of amorphous TiO₂ and rutile phase. DC electrical resistivity ρ measured for temperatures ranging from 300 to 500 K exhibited a metallic-like behaviour (ρ_473K = 1.05 × 10^?5 to 1.45 × 10^?6 Ω m) with a temperature coefficient of resistance ranging from 1.20 × 10^?3 K^?1 for the highest period (Λ = 50.0 nm) down to negative values close to ?4.97 × 10^?4 K^?1 for the smallest one (Λ = 14.0 nm). A relationship between the dimensions of periodic layers and their collective electrical resistivity is proposed where the resistivity does not solely depend on the total thickness of the film, but also depends on the chemical composition and thickness of each sub-layer. Charge carrier mobility and concentration measured by the Hall effect were both influenced by the dimension of TiO₂/TiO/Ti periods and the density of ionized scattering centres connected to the titanium concentration in the metallic sub-layers.