时空效应规律在软土深基坑工程中的运用

阐述了时空效应规律在软土深基坑工程中的运用情况，实践证明，运用时空效应规律，能可靠而合理地利用土体自身在基坑开挖过程中控制土体位移的潜力而达到保护环境的目的。     

高频微型脉冲管制冷机的实用化研究

脉冲管制冷机经过多年的发展，性能不断改善，目前已开始进入实用化阶段。高频微型脉冲管制冷机结构紧凑，应用方便，并且主要工作在需求量较大的液氮温区，因此将首先得到一定规模的应用。介绍了作者针对脉冲管制冷机在红外和超导方面的应用所作的实用化工作，讨论了尚待解决的问题。     

埋地管道三层PE外覆盖层及其检测方法研究

文章介绍了埋地管道三层PE外覆盖层系统的构造参数和性能特点,论述了两种用于埋地钢质管道外覆盖层状况检测的方法,一种是多频管中电流法,另一种是DCVG/CIPS组合检测技术。分别介绍了两种方法的工作原理、操作方法和设备,并结合工程实例进行了说明。这些方法和设备可分别或同时用于管道不开挖检测防腐层破损点的位置以及漏点大小。     

柴油机针阀体的乙炔低压渗碳

乙炔低压渗碳可以有效地避免在真空渗碳过程中产生炭黑和焦油，同时由于乙炔具有较高的供碳能力，使这一技术尤其适用于针阀体这样的小直径深盲孔零件。     

Helix packing in membrane proteins

A survey of 45 transmembrane (TM) helices and 88 helix packing interactions in three independent transmembrane protein structures reveals the following features. (1) Helix lengths range from 14 to 36 residues with an average length of 26.4 residues. There is a preference for lengths greater than 20 residues. (2) The helices are tilted with respect to the bilayer normal by an average of 21 degrees, but there is a decided preference for smaller tilt angles. (3) The distribution of helix packing angles is very different than for soluble proteins. The most common packing angles for TM helices are centered around +20 degrees while for soluble proteins packing angles of around -35 degrees are the most prevalent. (4) The average distance of closest approach is 9.6 A, which is the same as soluble proteins. (5) There is no preference for the positioning of the point of closest approach along the length of the helices. (6) It is almost a rule that TM helices pack against neighbors in the sequence. Of the 37 helices that have a sequence neighbor, 36 of them are in significant contact with a neighbor. (7) An antiparallel orientation is more prevalent than a parallel orientation and antiparallel interactions are more intimate on average. The general features of helix bundle membrane protein architecture described in this survey should prove useful in the modeling of helix bundle transmembrane proteins.     

材质对蜂窝纸板缓冲性能的影响

对两种不同材质的蜂窝纸板静态应力应变性能和动态缓冲结果进行了比较分析。讨论了蜂窝纸板力学性能对应变速度的敏感性及两种纸板的缓冲性能差异。缓冲试验结果表明。在不同的冲击应变率下蜂窝纸板的材质影响蜂窝纸板缓冲性能。     

固井水泥环缺陷对套管强度影响仿真分析

固井水泥环质量对套管的强度影响很大。建立了水泥环缺少1／12的井筒平面应变有限元模型，通过对固井水泥环缺陷引起的套管应力变化进行仿真模拟分析，得出无内压下套管的最大径向位移是水泥环完整时的3．9倍，水泥环的缺少导致Mises应力集中系数为2．0，套管外壁的最大塑性应变达到0．0152，定量分析固井质量对套管强度的影响，为热采井套管损坏提供一些定量数据。     

液氮温区同轴脉冲管制冷机的实验研究

脉冲管制冷机冷头朝上布置可以使制冷机与超导器件的耦合更方便 ,但对G -M型脉冲管制冷机 ,重力会对这种布置方式产生不利影响。对双向进气型脉冲管制冷机 ,直流和耦合传热会共同影响脉冲管制冷机的性能。介绍了液氮温区G -M型同轴脉冲管制冷机的实验结果 ,主要研究了蓄冷器温度分布和重力对脉冲管制冷机性能的影响     

ECAP细化晶粒法的仿真与分析

ECAP(Equal Channel Angular Extrusion)方法，是实现材料纯剪切变形的有效方法。本文采用有限元（FEA）分析软件ANSYS对Al的挤压过程进行仿真与分析。分析结果表明：外切角Φ、圆角半径、试样与凹模之间的摩擦系数、凹模本身的特性（如弹性模量、泊松比等）等等，对材料的变形量都有不同程度的影响。     

The Research of ST-OFDM in Physical Layer of IEEE 802.16a

This paper briefly introduces one of the three physical layer implementations of IEEE 802.16a~[1],WirelessMAN-OFDM PHY.Based on the implementation,the combination of Orthogonal Frequency Division Multiplexing(OFDM)and Space-Time Coding(STC)which is briefly called ST-OFDM in IEEE 802.16a,is investigated under thechannel provided in Ref.[2].Especially,this paper is focused on the influence of the optimal decision threshold on the sys-tern Bit-Error-Rate(BER)performance based on unequal probabilities of sources.The simulations show that when Signal-Noise-Ratio(SNR)is low the optimal decision threshold is obviously superior to the usual one;when SNR is high to someextent,such as 10 dB for 4QAM and 16 dB for 16QAM,we can use the usual decision threshold instead of the optimal