Finite element analysis of partly wrinkled reinforced prestressed membranes

Wrinkling is a well known phenomenon experimented by tension membranes in Civil Engineering applications. This paper will present an efficient numerical technique for the computational simulation of such wrinkles in a prestressed membrane. In particular, the relaxed energy approach (Pipkin in IMA J Appl Math 36:85–99, 1986) is particularized for prestressed membranes (Gil in Textile composites and inflatable structures, CIMNE, 2003) undergoing moderate strains. Wrinkling conditions in terms of the Euler-Lagrange finite deformation tensor along principal directions will be obtained. This will provide a framework to describe properly the initial instant when wrinkles start to be encountered in a prestressed Saint Venant–Kirchhoff hyperelastic membrane. Subsequently, a modified Helmholtz’s free energy functional will be introduced with the purpose of describing the modified constitutive behaviour of the continuum after the onset of wrinkling. Consistent derivations of the stress tensor as well as the constitutive tensor will de depicted. The results will be particularized for membranes and cables in a Finite Element discretization basis. Some numerical examples will prove the accuracy and robustness of the described algorithm.     

Silver Electrodeposition from Photographic Processing Solutions

This paper describes the parameters that are important in the industrial practice of silver removal from photographic fixers. The experiments were performed under potentiostatic control using synthetic solutions. The current efficiency was analysed as a function of the cathodic potential taking into account the deposit quality. A cathodic potential of ?0.5 V against a saturated calomel electrode is recommended. The conditions to prevent the darkening of the electrodeposit were investigated. The determination of silver concentration in the solution was made by direct potentiometry. The results obtained with synthetic fixers were corroborated by making the silver deposition from commercial fixers in an electrochemical reactor with rotating cylinder electrode intercalated in an electrolytic flow circuit in order to simulate practical conditions.     

Deposition mechanisms in langmuir-blodgett films

As part of a study of the possible application of polymerisable Langmuir-Blodgett (LB) films as ultra-fine-line e-beam resists, an investigation of the variation of film structure of 22-tricosenoic acid with differing deposition conditions has been made. Unexpected effects with significant implications for deposition speed and resist sensitivity have been observed, and the new techniques for film characterisation developed during the investigation have resulted in a revised model of deposition explaining the observed independence of the disorder causing optical scattering and the macroscopic features observed by polarised microscopy.     

Energy pricing policies in developing countries

Government energy pricing policies have multiple and often conflicting objectives: economic efficiency, government revenues (for both parastatal supply companies and the treasury), maintenance or improvement of income distribution, promotion of particular sectors (such as industrial exporters and local resource development) demand management and security of supply. It is important to examine the impacts on and the trade-offs between these objectives resulting from alternative policies in order to assist in policy selection. This article discusses the more important objectives and their conflicts and outlines an approach for the quantitative examination of alternative policies.     

Community-based behavioral training approaches for people with mental retardation and mental illness.

Reviews challenges associated with behavioral training approaches for individuals with mental retardation and mental illness in the community. Family and non-family facilitated training are considered. Professional practice issues are reviewed, and justification for multifactor behavioral assessment is offered. Future research directions are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Terrestrial digital video broadcasting for mobile reception using OFDM

Performance of a system design for digital video broadcasting is examined with emphasis on mobile reception. Orthogonal frequency division multiplexing (OFDM) is used to achieve good bandwidth efficiency and to mitigate the intersymbol interference resulting from the channel delay spread. The resulting equivalent channel including OFDM can be modeled as a flat Rayleigh fading channel plus an interchannel interference (ICI) term due to the channel Doppler spread. This ICI term is analyzed and shown to result in an error floor. Performance improvements due to antenna diversity and trellis-coded modulation (TCM) are given. Finally, multiresolution modulation is discussed as a means of achieving graceful degradation and giving degrees of freedom for further performance improvement.This research was supported by the Multimedia Systems R & D Laboratory, Hitachi, Ltd.     

Laboratory evaluation of the XR-Bond Dentin/Enamel Bonding System

The shear bond strengths of the XR-Bonding System used in conjunction with Herculite composite, to the dentine of forty extracted human permanent first and second molars were determined after the test specimens were stored in physiological saline at 37 degrees C for 48 hours, one week, two weeks and four weeks, respectively. A shear load was applied to the base of the bonded composite cylinders with a knife-edged rod at a crosshead speed of 0.5 mm/minute. The shear bond strengths were expressed in megapascals (MPa). The quantitative microleakage of Class V preparations in dentine (cementum) in forty-eight extracted human maxillary permanent canines restored with the same dentinal bonding system and after storage in physiological saline at 37 degrees C for the same time intervals as for the shear bond strength tests, was determined. On the final day of each time interval the teeth were thermocycled X 500 in a 2 per cent methylene blue solution between 8 degrees C and 50 degrees C with a dwell time of 15 seconds. Microleakage was determined by a spectrophotometric dye-recovery method and expressed in microgram dye/restoration. There was a significant trend for the shear bond strengths to increase with duration of storage (p = 0.01) but the quantitative microleakage was not significantly different (p = 0.75).     

Selective oxidation of alcohols using octahedral molecular sieves: influence of synthesis method and property–activity relations

Manganese oxides having a tunnel structure (OMS-2) have been utilized as selective catalysts for alcohol oxidation. In this study manganese oxide catalysts were synthesized in different media and modified by exchanging the tunnel cation by H⁺, using acid treatment or exchanging with NH₄⁺ followed by thermolysis. Various alcohol oxidations were performed using these catalysts to ascertain the influence of synthesis method on their activity. A correlation is made between lattice oxygen instability and activity of the catalysts, which indicates involvement of the lattice oxygen in the mechanism. The exchange of the tunnel cation with the smaller H⁺ ions leads to weakening of the Mn–O bond, as verified by temperature programmed desorption (TPD) results. Only the chemisorbed oxygen on the surface (O⁻) and the lattice oxygen in the layers close to the surface is involved in the oxygen transfer during the reaction.     

Block Copolymer Surface Reconstuction: A Reversible Route to Nanoporous Films

Thin films of block copolymers have been used as templates and scaffolds for the fabrication of arrays of nanostructured materials. In general, a chemical modification of the film or the removal of one of the components by photodegradative methods is required to produce a nanoporous film that serves as a template or scaffold. Here, however, the preferential interaction of one of the components with a solvent is shown to produce a reconstruction of the block copolymer film that, upon drying, leads to the generation of a nanoporous template. The area density of the pores is identical to that of the original copolymer thin film. Since no chemical reactions occurr, the process is fully reversible. Upon heating the copolymer film above its glass‐transition temperature, mobility is imparted to the copolymer and the original copolymer film with oriented domains is recovered. The film reconstruction significantly simplifies the generation of nanoporous templates.