3-D deformable image registration: a topology preservation scheme based on hierarchical deformation models and interval analysis optimization.

This paper deals with topology preservation in three-dimensional (3-D) deformable image registration. This work is a nontrivial extension of, which addresses the case of two-dimensional (2-D) topology preserving mappings. In both cases, the deformation map is modeled as a hierarchical displacement field, decomposed on a multiresolution B-spline basis. Topology preservation is enforced by controlling the Jacobian of the transformation. Finding the optimal displacement parameters amounts to solving a constrained optimization problem: The residual energy between the target image and the deformed source image is minimized under constraints on the Jacobian. Unlike the 2-D case, in which simple linear constraints are derived, the 3-D B-spline-based deformable mapping yields a difficult (until now, unsolved) optimization problem. In this paper, we tackle the problem by resorting to interval analysis optimization techniques. Care is taken to keep the computational burden as low as possible. Results on multipatient 3-D MRI registration illustrate the ability of the method to preserve topology on the continuous image domain.     

Proton microbeam induced damages in glasses: Ca and Na distribution modification

Nowadays, nuclear microprobes are commonly used in Earth Sciences as an analytical tool to detect a large number of trace elements in geological samples. However, radiation damages induced in natural glasses during an analysis by ionization are not completely controlled. Some difficulties remain in defining the appropriate analytical conditions without modifying the alkaline distribution in the matrix. Our approach consists of using a synthetic glass to quantify these modifications. With a 2 MeV proton microbeam, the Na and Ca signal evolution has been followed as a function of the deposited charge. Na and Ca distribution maps in and around the beam impact evidence a complex remobilization of both elements. The use of three different proton energies (1.32 MeV, 2MeV and 3MeV) permits the Na and Ca distribution profiles to be realized for increasing depth layers. A similar behavior of alkaline elements has been found within complex natural glasses.     

Magnetically responsive polypyrrole nanotubes using Ce(III)-stabilized maghemite nanoparticles

Nanocomposites (NCs) that are made magnetically responsive in controlled conditions attract continuing interest for their added magnetic properties. In this study, we report on the preparation and full characterization of a multifunctional NC composed of magnetic γ-Fe(2)O(3) nanoparticles (NPs) covalently attached to the surface of polyaminated (polyNH(2)) poly(2,6-di-pyrrol-1-yl-hexanoic acid) (pDPL) nanotubes (NTs). Such a hybrid conducting polymer iron oxide maghemite γ-Fe(2)O(3)@pDPL NC built specifically on covalent bonding has never been reported. The maghemite γ-Fe(2)O(3) NPs were prepared using an innovative ultrasound-assisted Ce(3+) doping process, resulting in polycarboxylation of the NP surface useful for control of aggregation and derivatization of functionality. The second component of the NC, i.e. polyNH(2)-modified pDPL NTs, was prepared from an acid functional pyrrole species followed by amine modification. The resulting innovative γ-Fe(2)O(3)@pDPL NC can be viewed as a multifunctional nanomaterial since it possesses both types of derivatization, i.e. polyCOOH (NPs) and polyNH(2) (NTs) combined with magnetic responsivity.     

Convection naturelle dans une boîte rectangulaire légèrement inclinée contenant un milieu poreuxNatural convection in a slightly slanted rectangular box filled with a porous medium

Steady natural convection in a rectangular slightly inclined box filled with a porous medium is studied. If the lower plate is heated and the aspect ratio large, the structure of the flow is simple as long as the Rayleigh number remains sub-critical. If the upper plate is heated, a boundary layer regime appears provided that the Rayleigh number is high. The Nusselt number is calculated by the Galerkin method and shown to approximate in this particular case to the following expression: Nu= 1 + 0,16k^3/2Ra*^1/42     

Reducing the diffraction artifacts while implementing a phase function on a spatial light modulator

Spatial light modulators are often used to implement phase modulation. Since they are pixelated, the phase function is usually approximated by a regularly sampled piecewise constant function, and the periodicity of the pixel sampling generates annoying diffraction peaks. We theoretically investigate two pixelation techniques: the isophase method and a new nonperiodic method derived from the Voronoi tessellation technique. We show that, for a suitable choice of parameters, the diffraction peaks disappear and are replaced by a smoothly varying halo. We illustrate the potential of these two techniques for implementing a lens function and wavefront correction.     

Nanostructures in thermal spray coatings

The nature of the nanograins formed by high velocity oxy-fuel thermal spraying of (FeAl) milled powder has been investigated using transmission electron microscopy on cross-sectional thin foils. Equiaxed 3D nanometer crystallites are formed by recrystallization in the unmelted powder particles while 2D nanometer columnar grains are produced by rapid solidification within the fully molten splats.     

Recent achievements in the development of partitioning processes of minor actinides from nuclear wastes obtained in the frame of the NEWPART European programme (1996–1999)

Partitioning of long-lived minor actinides (americium and curium) from the nuclear wastes issuing the reprocessing of nuclear spent fuels, in order to transmute them into short-lived nuclides or to condition them into stable crystalline matrices, was the subject of intense research within the NEWPART research program of the European 4^th Frame Work Program, FWP (1996–1999). The target waste considered was the acidic raffinate (HAR) issuing the reprocessing of the used nuclear fuels by the PUREX process. A two step separation process based on liquid-liquid extraction was designed. The first step consists in the co-separation of the mixture of trivalent actinides and lanthanides from the HAR by extraction with a malonamide extractant (DIAMEX process), while the second step concerns the actinides(III)/lanthanides(III) group separation (SANEX process). Several DIAMEX and SANEX processes were developed and successfully tested with cold, spiked and genuine high active effluents. The research carried out also included basic and fundamental works in order to better understand the relationships between the structures of the extractants and their affinities for the target metal ions. The lecture highlighted both the basic and applied aspects of the research. This work will be pursued (PARTNEW program) within the 5^th FWP of the European Union during the period 2000–2003.     

A new and fast method to determine mixing and conductive cooling of thermal waters in carbonate-evaporite environments

A method is proposed, for low-temperature geothermal systems, for calculating the aquifer temperature and relative proportions of mixed thermal and shallow groundwaters from carbonate-evaporite environments. The fluid is assumed to be in chemical equilibrium with anhydrite and chalcedony in the aquifer, and mixed with diluted waters during its ascent. An attempt has been made to establish a relationship between reservoir temperature, the aqueous sulfate and silica contents of the mixed fluid, the proportion of the thermal end-member and the temperature of the adiabatic mixture. The method calculates mineral solubilities in the field context, calibrated on representative thermal springs. The method also considers the effects of conductive cooling.     

Vector Field Based Texture Mapping of Animated Implicit Objects

This paper shows that an adequate use of vectorfields can solve most inconsistencies related to texture mapping that appear in current animation and rendering systems based on implicit objects. The method used is based on the concept of a virtual skin. A skin with its own texture mapping is spread over an implicit object and is constrained to stick to the deformation of the implicit object. A vectorfield is used to compute the relationship between the motion of the skin and the deformation of the object. Visual and implementation issues are discussed with respect to typical applications of implicit objects in computer graphics.