Structure and properties of plasma sprayed BaTiO3 coatings

Plasma spraying enables to create layers with thickness in a millimeter range adhering on various substrates. This paper provides a study of electric and mechanical properties of BaTiO₃ coatings prepared by atmospheric plasma spraying. The spraying was carried out by a direct current gas-stabilized plasma gun. BaTiO₃ was fed into the plasma jet as a feedstock powder prepared by a reactive sintering of micrometer-sized powders of BaCO₃ and TiO₂. Microstructure and phase composition are reported and discussed in connection with electric and mechanical properties. The ability of the used techniques to detect precisely the phase transformation temperatures of BaTiO₃ plasma sprayed coatings is discussed as well. A depth-sensing indentation measurement was done between 290 and 520 K to provide local mechanical characterization. The elastic modulus has shown slightly higher values than that reported typically in papers focused on BaTiO₃ ferroelectric thin films. The average Vickers microhardness is tested to characterize the samples in larger scale. A wear resistance in a slurry environment is reported as well. Dielectric properties are reported for the temperature window of existence of the tetragonal ferroelectric phase. Relative permittivity and loss factor are studied at frequency from 50 Hz to 1 MHz and temperature from 260 to 400 K.     

A new technique to derive particle size distributions and aerosol number concentrations directly from thermophoretic data

The manufacture of many high value-added powders takes place by the decomposition of gaseous precursors in aerosol tube reactors. Historically, process improvements were achieved by making changes on the outside of the reactor and observing what comes out at the end of the pipe. The development of increasingly accurate aerosol dynamics models based on engineering first principles has been limited because models were typically validated on integral properties of ex situ product, instead of particle properties measured at multiple positions inside the reactor. In this study, a model reactor was equipped to capture samples thermophoretically from 15 internal positions. Additional in-line measurements were achieved with a multi-stage inertial impactor and by traditional analysis of ex situ product. Calculations were performed to verify that thermophoresis was the dominant mechanism of particle capture. The thermophoretic samples were analyzed by electron beam microscopy and image analysis to develop particle size distributions at each of the internal positions inside the reactor. An approximation of Talbot's Equation for thermophoretic velocity allowed experimental measurements to be combined with thermophoretic sample data to give predictions of particle number concentration corresponding to the precise sampling locations. The combinations of particle size distributions and number concentrations provide powerful insights on particle nucleation and growth dynamics.     

On the use of peak-force tapping atomic force microscopy for quantification of the local elastic modulus in hardened cement paste

A surface of epoxy-impregnated hardened cement paste was investigated using a novel atomic force microscopy (AFM) imaging mode that allows for the quantitative mapping of the local elastic modulus. The analyzed surface was previously prepared using focussed ion beam milling. The same surface was also characterized by electron microscopy and energy-dispersive X-ray spectroscopy.We demonstrate the capability of this quantitative nanomechanical mapping to provide information on the local distribution of the elastic modulus (from about 1 to about 100 GPa) with a spatial resolution in the range of decananometers, that corresponds to that of low-keV back-scattered electron imaging. Despite some surface roughness which affects the measured nanomechanical properties it is shown that topography, adhesion and Young's modulus can be clearly distinguished.The quantitative mapping of the local elastic modulus is able to discriminate between phases in the cement paste microstructure that cannot be distinguished from the corresponding back-scattered electron images.     

Comparative analysis of microstructure and fracture surfaces of blade roots

Samples of chromium stainless steel were loaded to investigate fatigue crack growth in roots of steam turbine blades. Images of the material microstructure and fracture surfaces were subjected to textural image analysis. The main steps were normalization, enhancement of fiber structures and 2D Fourier transforms. By means of analysis of spectra in the space of periods, characteristic dimensions of both image sets were investigated. The locations of three peaks of spectral functions are very close in both image sets. It may be concluded that the material microstructure is projected onto the morphology of fracture surfaces much more than was expected.     

Complexing agent assisted synthesis of high aspect ratio Fe3 +/Mg2 + layered double hydroxides

A new, facile synthesis for Fe^3 +/Mg^2 + LDHs is developed and investigated. The crucial feature of the synthesis is the usage of a complexing agent (diethylenetriamine, DETA) to increase the solubility of iron phases precipitated intermediately. The influences of different synthesis parameter like DETA concentration, pH value, and temperature are investigated. The optimized synthesis route yields high aspect ratio Fe^3 +/Mg^2 + LDHs which are expected to be interesting filler materials for flame retardant nanocomposites.     

Fabrication of gap-optimized CMUT

A recently introduced set up of capacitive micromachined ultrasonic transducers (cMUT) combines a conductive membrane above a structured sacrificial layer. All previous approaches either require an additional metallic electrode or do not possess a structured sacrificial layer and, consequently, may make exact adjustment of the membrane dimensions difficult. The present set ups are especially suited for the fabrication of cMUT with gap heights ranging between 50 nm and 2 /spl mu/m between the electrodes. Large gaps are a prerequisite to enabling sufficient deflections of the membrane and, therewith, to generating high pressure gradients. On the other hand, small gap sizes are desirable for detecting weak ultrasonic sources. This paper focuses on the fabrication process of cMUT to realize electrode separation above 500 nm and, in addition, on the manufacturing of cMUT with gaps below 500 nm. The successful realization has been proven by some basic experimental investigations. Finally, the fundamental equations of a frequently chosen simulation model are documented, as a number of ambiguities exist in the common literature.     

Partition coefficients of environmentally important phenols in a supercritical carbon dioxide-water system from cocurrent extraction without analysis of the compressible phase

Partition coefficients of phenol, salicylic acid, and several environmentally important chloro- and nitrophenols in a supercritical CO2-water system were measured using direct cocurrent extraction of aqueous solutions of the individual solutes with CO2. Partitioning data on the nitrophenols and salicylic acid were obtained for the first time. To bypass the troublesome and error-prone analysis of the CO2-rich phase, the present method employed only the solute concentrations in the aqueous phase before and after extraction to determine the partition coefficient. Unlike most previous engineering studies of phenol partitioning in a CO2-water system, the concentrations of phenolic solutes approached infinite dilution in both phases. This makes the results relevant to analytical-scale SFE of environmental water samples with CO2. Because of effective infinite dilution of the solutes, the partition coefficients provide a direct measure of relative CO2-philicity/hydrophilicity of the individual phenols. Compared to the octanol-water partition coefficients of substituted phenols, the CO2-water partition coefficients are more sensitive to substitution in the position neighboring the hydroxyl group.     

A biologically inspired active compliant joint using local positive velocity feedback (LPVF).

Starting from studies which revealed that positive feedback is found in the control system for walking in arthropods, we have constructed a new positive feedback driven joint that can be used for solving compliant motion tasks. We propose two different joint constructions each of which shows passive compliance. Based on these joints we introduce three different local positive velocity feedback (LPVF) controllers and discuss their properties in the context of motion generation in closed kinematic chains. The third circuit named undelayed dLPVF is used for the control of a compliant planar manipulator which turns a crank. Our concept is of highly decentralized nature and follows the idea of embodiment. In our case this means that a process which is controlled by LPVF controllers reveals its nature when the controllers interact with this process.     

Model Selection by Predictive Validation

: Gaussian mixture modelling is used to provide a semi-parametric density estimate for a given data set. The fundamental problem with this approach is that the number of mixtures required to adequately describe the data is not known in advance. In our previous work , we described an algorithm, termed Predictive Validation, which attempted to automatically select the number of components. The aim of this paper is to investigate the influence of the various parameters in our model selection method in order to develop it into an operational tool. In this paper, we demonstrate the successful application of model validation to three applications in which the selected models are used for supervised classification, unsupervised classification and outlier detection tasks. Received: 23 Novenber 2000, Received in revised form: 24 April 2001, Accepted: 21 May 2001