Environmental effects on ductile-phase toughening in Nb5Si3-Nb composites

A variety of materials have been toughened via the addition of a ductile phase. Brittle silicide intermetallics such as Nb₅Si₃ have been significantly toughened by niobium particles incorporated during in-situ processing techniques. In the work described here, toughness tests conducted on Nb₅Si₃ were monitored in a scanning electron microscope to view the process of toughening provided by the niobium particles. In particular, the behavior of the ductile phase was monitored and related to the toughness obtained. In an attempt to vary the behavior of the ductile phase, the composite materials were exposed to a variety of gaseous environments and subsequently tested in air. The resulting toughness, resistance-curve behavior, and in-situ results highlight the importance of the behavior of the ductile phase on subsequent properties.     

Visual masking and visual integration across saccadic eye movements.

Studied visual masking and visual integration across saccadic eye movements in 4 experiments. In a 5th experiment, 4 randomly chosen dots from a 3?×?5 dot matrix were presented in 1 fixation, and 4 different dots from the matrix were presented in a 2nd fixation. Ss reported the location of the missing dot. When the 1st display was presented just before the saccade (as in Exps I–III), Ss accurately specified the missing dot location when the dots were presented to the same region of the retina but not when they were presented in the same place in space. When the 1st display was presented well before the saccade (as in Exp IV), Ss performed poorly regardless of retinal or spatial overlap. Results indicate the existence of a short-lived retinotopic visual persistence but provide no support for a spatiotopic visual persistence capable of fusing the contents of successive fixations. It is concluded that transsaccadic integration depends instead on an abstract memory that accumulates position and identity information about the contents of successive fixations. Results are discussed in relation to the work by M. L. Davidson et al (see record 1974-10245-001). (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Oxygen Tracer Diffusion in Vitreous Silica

Oxygen diffusion in vitreous silica glass is studied using the gas exchange technique. The tracer concentration profiles are consistent with a model based on two mechanisms, one network and the other interstitial. These processes are coupled through limited network–interstitial exchange. Nuclear reaction analysis and secondary ion mass spectrometry techniques are performed and compared. These results are compared to experiments on transport in thin silica films grown on single-crystal silicon.     

Loss of control, self-blame, and depression: An investigation of spouse caregivers of Alzheimer's disease patients.

Tested several predictions derived from the reformulated learned helplessness (RLH) depression model developed by L. Y. Abramson et al (see record 1979-00305-001) and from recent critiques of that model, in a longitudinal study of spouses caring for a husband or wife with Alzheimer's disease. During initial interviews, 68 caregivers (aged 37–85 yrs) rated the uncontrollability of important upsetting events related to their spouse's disease and were scored on an index of internal–external causal attribution (CATN) for those events. In addition, at both the initial and follow-up interviews (n?=?38) about 10 mo later, caregivers were rated for depression, anxiety, and hostility. Results indicate that the indices of loss of control and CATN were more consistently related to depression than to anxiety or hostility, although hostility was related to CATNs. Correlations of the loss of control and CATN variables with depression remained significant after controlling for a measure of the spouse's objective disability. In hierarchical regression analyses, perceived loss of control and its interaction with CATN significantly predicted follow-up depression after controlling for initial depression. The interaction showed that loss of control combined with an internal attribution predicted higher depression than did either one alone. The importance of including specific uncontrollable events when studying the RLH model is emphasized. (36 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Crystal plasticity modeling of deformation and creep in polycrystalline Ti-6242

This paper develops an experimentally validated computational model based on crystal plasticity for the analysis of two-phase α/β Ti-6242 polycrystalline alloys. A rate-dependent elastic-crystal plasticity model is incorporated in this model to accommodate anisotropy in material behavior and tension-compression asymmetry inherent to this alloy. A combination of microtesting, orientation imaging microscopy, computational simulations, and minimization process, involving genetic algorithms, is implemented in this study for careful characterization and calibration of the material parameters. Size effects are considered in this analysis through a simple scaling process. A homogenized equivalent model of the primary α with transformed β colonies is developed for incorporation in the Ti-6242 FE model. The polycrystalline Ti-6242 computational model incorporates accurate phase volume fractions, as well as statistically equivalent orientation distributions to those observed in the orientation imaging microscopy scans. The effects of orientation, misorientations, and microtexture distributions are investigated through simulations by this computational model. The model is used to simulate constant strain rate and creep tests in compression and tension, and the results are compared with experiments. The effects of microstructure and creep-induced load-shedding on the localization of microstructural stresses and strains are studied for potential crack initiation criteria.     

A kinematic analysis of the modified flight telerobotic servicer manipulator system

A reverse analysis of a 6 degree of freedom (dof) subchain of a modified 7 dof flight telerobotic servicer (FTS) manipulator system is presented. The 6 dof subchain is designated as a TR-RT* chain. At the outset, it was considered that the reverse analysis would be similar to a TTT manipulator analyzed previously for which the third and fourth joints intersect at a finite point. This was not, however, the case and a sixteenth-degree tan-half-angle polynomial was derived for the TR-RT manipulator. The elimination procedure is interesting and much simpler than the procedures for the general case.     

Mössbauer effect studies and X-ray diffraction analysis of cobalt ferrite prepared in powder form by thermal decomposition method

Cobalt ferrite (Co_xFe_3?xO₄) is prepared in powder form by thermal decomposition of iron and cobalt salts and is analysed by X-ray diffraction and Mössbauer spectroscopic techniques. The variation of Mössbauer parameters, lattice parameters and crystallite size of the products formed with variation in the composition of Fe and Co ratios are studied. The studies confirm the formation of nano-size cobalt ferrite particles with defect structure and it is found to be maximum for the Fe : Co = 60 : 40 ratio of the initial precursor oxides.     

Motivated attention and prepulse inhibition of startle in rats: Using conditioned reinforcers as prepulses.

In humans, prepulse inhibition (PPI) of startle is greater during attended prestimuli than it is during ignored prestimuli, whereas in rats, most work has focused on passive PPI, which does not require attention. In the work described in this article, researchers developed a paradigm to assess attentional modification of PPI in rats using motivationally salient prepulses. Water-deprived rats were either conditioned to attend to a conditioned stimulus (CS; 1-s, 7-dB increase in white noise) paired with water (CS+ group), or they received uncorrelated presentations of white noise and water (CSo group). After 10 conditioning sessions, startle probes (50 ms, 115 dB) were introduced, with the CS serving as a continuous prepulse. Three experiments examined PPI across a range of prepulse intensities (4-10 dB) and stimulus onset asynchronies (SOAs; 30-960 ms). PPI was consistently reduced in the CS+ group, particularly with a 10-dB prepulse and a 60-ms SOA. Thus, PPI in rats differed between attended and ignored prestimuli, but the effect was reversed in the results of research with humans. A fourth study eliminated the group difference by reversing the CS-water contingency. Methodological and motivational hypotheses regarding the current findings are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Minimizing total weighted completion time when scheduling orders in a flexible environment with uniform machines

We consider the scheduling of orders in an environment with m uniform machines in parallel. Each order requests certain amounts of k different product types. Each product type can be produced by any one of the m machines. No setup is required if a machine switches over from one product type to another. Different product types intended for the same order can be produced at the same time (concurrently) on different machines. Each order is released at time zero and has a positive weight. Preemptions are allowed. The completion time of an order is the finish time of the product type that is completed last for that order. The objective is to minimize the total weighted completion time. We propose heuristics for the non-preemptive as well as the preemptive case and obtain worst case bounds that are a function of the number of machines as well as the differences in the speeds of the machines. Even though the worst-case bounds we showed for the two heuristics are not very tight, our experimental results show that they yield solutions that are very close to optimal.