钢铁厂材料核算决策支持系统

本文介绍了钢铁厂材料核算系统的决策支持系统，描述了系统结构，模型自动生成方法，并用层次分析法说明钢铁厂材料采购的决策过程。     

Investigation of the Effects of some Parameters in the Production of Chromate from Chromite Ores in Iskenderun Region

The conversion of chromite ore from iskenderun region into chromate was investigated. Firstly, the chromite ore was analysed using conventional chemical methods. Then, the effect of some parameters such as roasting time, temperature and the amount of additives on the conversion efficiency to the chromate was examined. The optimum roasting conditions were determined as 300°C, 2 hours, 10 times the stoichiometrically required amounts of NaClO₃ and 6 times the stoichiometrically required amounts of KOH. Under these conditions, the maximum recovery of chromate was found to be 100%. The product obtained from the roasting process was leached with water to produce a clean chromate solution. The effect of temperature and solid/liquid (S/L) ratio was investigated in the water leaching experiments. The optimum experimental results obtained were 100% at a 1:5 solid to water ratio at 25°C and 20 min leaching period. The chromate solution was purified using conventional purification processes.     

Synthesis and characterization of poly(N‐vinyl‐2‐pyrrolidone) grafted sodium alginate hydrogel beads for the controlled release of indomethacin

Graft copolymers of sodium alginate (NaAlg) with N‐vinyl‐2‐pyrrolidone were prepared using azobisisobutyronitrile as initiator. The graft copolymers (NaAlg‐g‐PVP) were characterized with Fourier transform infrared spectroscopy, elemental analysis, and differential scanning calorimetry. Polymeric hydrogel beads of NaAlg and NaAlg‐g‐PVP were prepared by crosslinking method using glutaraldehyde (GA) as a crosslinker in the hydrochloric acid catalyst (HCl) and these beads were used to deliver anti‐inflammatory drug, indomethacin (IM). Chemical stability of the IM after encapsulation into beads was confirmed by FTIR. Preparation conditions of the NaAlg‐g‐PVP beads were optimized by considering the percentage entrapment efficiency, particle size, swelling capacity and their release data. In vitro release studies were performed in simulated gastric fluid (pH 1.2) for the initial 2 h, followed by simulated intestinal fluid (pH 7.4) for 4 h. Effects of GA concentration, exposure time to GA, drug/polymer (d/p) ratio, and concentration of HCl on the release of IM were discussed. It was observed that IM release from the beads decreased with increasing GA concentration and exposure time. IM release also decreases with increasing d/p ratio and HCl concentration. The highest IM release was obtained to be 77% for beads crosslinked with 0.027M GA. Swelling experiments were also performed to compute molecular mass between crosslinks of the beads. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

A histopathologic study of direct pulp-capping with adhesive resins

The concentration of heat-shock proteins of 70 kD (HSP70) in heart tissue has been shown to increase during transient myocardial ischaemia and to persist during several hours of reperfusion. In this study the relationship between the local myocardial HSP70 concentration and blood flow was addressed for control physiological conditions and acute myocardial ischaemia. A specific aim of this study was to address the question of whether low flow areas under control physiological conditions have undergone a transient ischaemia during the preceding hours and thus may be in a state of hibernation or stunning. In 12 anaesthetized, open-chest beagle dogs (6 control and 6 with 60-min coronary artery stenosis) heart rate, mean aortic pressure, mean arterial partial pressure of O2 and partial pressure of CO2 averaged 85+/-16 beats/min, 94+/-14 mmHg, 102+/-17 mmHg and 39+/-6 mmHg, respectively. Regional HSP70 and myocardial blood flow (RMBF) were measured using an HSP70-enzyme-linked immunosorbent assay and the tracer microsphere technique, respectively, in samples of 250 mg wet mass. In the control group the mean RMBF was 1.06+/-0.59 ml.min-1.g-1 and the local HSP70 concentration was 7.08+/-1.03 microg/mg cytosolic protein. Myocardial HSP70 showed a blood flow-independent regional biological heterogeneity, equivalent to a coefficient of variation of 0.31. Local HSP70 concentrations did not differ (P>0.05) between control low and high flow samples, 6.16+/-1.0 vs 6.08+/-0.75 microg/mg cytosolic protein, respectively. However, after 60 min of coronary artery occlusion the local HSP70 concentration increased from 7.08 +/-1.03 to 13.43+/-3.19 microg/mg cytosolic protein (P<0. 001). There was a significant inverse relationship between the percent reduction of local blood flow and HSP70 (r=-0.56, P<0.001). From these results it is concluded that: (1) low flow samples under control physiological conditions are unlikely to be in a state of hibernation or stunning since their HSP70 concentration is normal and (2) the increase in the local HSP70 concentration during myocardial ischaemia reflects the degree of impairment of O2 delivery.     

An experimental study on air window collector having a vertical blind for active solar heating

In this study, an air window collector having vertical black blinds was investigated experimentally under actual outdoor conditions. The vertical blind was installed between two 120 × 80 cm glass panes. It can rotate about the vertical axis. The fully open position makes a 90° angle with the vertical plane. A commercially available blind made of cloth and coated with black paint was tested. The air circulation in the system is provided by a fan parallel to blinds. Various parameters were measured and recorded using a data acquisition system. The effect of these parameters on the thermal performance of the system were determined experimentally.     

Corrosion morphologies on magnesium alloy AZ 91

Initiation and early propagation of pitting and filiform corrosion on bare alloy AZ91 (9% Al, 1% Zn) are investigated by natural immersion corrosion tests, electrochemical measurements and microanalytical studies. Initiation sites are few. Corrosion spreads from these sites first in the form of filiform corrosion for a limited period of time and pitting which later develops into a cellular type of etching. The important factors affecting filiform corrosion are temperature, material structure and degree of polarization at the anodic sites. Filiform attack on AZ91, unlike the classical mechanisms of filiform corrosion on coated metals, is driven by hydrogen evolution reaction on the cathodic sites of the surface, occurs under significant anodic control, propagates at a high, constant speed independent of degree of polarization along preferential paths determined by compositional and crystallographic factors, and is a temporary phenomenon under open circuit conditions. Pitting corrosion is more predominant with decreasing anodic polarization.     

Forecasting based on sectoral energy consumption of GHGs in Turkey and mitigation policies

Recently, global warming and its effects have become one of the most important themes in the world. Under the Kyoto Protocol, the EU has agreed to an 8% reduction in its greenhouse gas (GHG) emissions by 2008–2012. The GHG emissions (total GHG, CO₂, CO, SO₂, NO₂, E (emissions of non-methane volatile organic compounds)) covered by the Protocol are weighted by their global warming potentials (GWPs) and aggregated to give total emissions in CO₂ equivalents. The main subject in this study is to obtain equations by the artificial neural network (ANN) approach to predict the GHGs of Turkey using sectoral energy consumption. The equations obtained are used to determine the future level of the GHG and to take measures to control the share of sectors in total emission. According to ANN results, the maximum mean absolute percentage error (MAPE) was found as 0.147151, 0.066716, 0.181901, 0.105146, 0.124684, and 0.158157 for GHG, SO₂, NO₂, CO, E, and CO₂, respectively, for the training data with Levenberg–Marquardt (LM) algorithm by 8 neurons. R² values are obtained very close to 1. Also, this study proposes mitigation policies for GHGs.     

Lipid peroxides, glutathione, gamma-glutamylcysteine synthetase and gamma-glutamyltranspeptidase activities in several tissues of rats following water-immersion stress

The effects of water-immersion restraint (WIR) stress on lipid peroxide, glutathione (GSH), glutathione peroxidase (GSH-Px), gamma-glutamylcysteine synthetase (gamma-GCS) and gamma-glutamyltranspeptidase (gamma-GT) activities in several tissues of rats were investigated. Hepatic and intestinal lipid peroxide levels were increased significantly in the WIR stress group. In both tissues, GSH levels were significantly decreased and gamma-GCS activity was significantly increased. In addition, gamma-GT activities remained unchanged in both tissues following WIR stress. However, lipid peroxide and GSH levels did not change in the stomach and brain in the WIR stress group compared to the control group. These results suggest that lipid peroxidation, but not the depression of GSH synthesis and/or the increase of GSH breakdown may be a factor in hepatic and intestinal GSH reduction following WIR stress.     

An experimental and three-dimensional numerical study of natural convection heat transfer between two horizontal parallel plates

In this study, experimental and three-dimensional numerical studies were performed to investigate the effects of plate spacing and temperature difference on natural convection between isothermally heated upward-facing lower horizontal plate and externally insulated horizontal upper plate. Air is used as the heat transfer medium. Rayleigh number varied in the 1108–2.339 × 10⁵ range. Several numerical simulations for three-dimensional steady laminar and turbulent flows heat transfer were carried out using a commercial CFD code Fluent 6.2. Results have shown that there is a good agreement between the numerical and present experimental results as well as with available data in literature.