Use of ultrasonic energy in reactive dyeing of cellulosic fabrics

The use of ultrasonic energy in dyeing cotton fabrics with monochlorotriazine and vinylsulphone reactive dyes has been studied spectrophotometrically. The dyeings carried out conventionally and by the use of ultrasonic techniques were compared in terms of percentage exhaustion, total amount of dye transferred to the washing bath after dyeing, fastness properties and colour values of the dyed materials. Overall results have shown that the use of ultrasound in reactive dyeing of cellulosic fabrics can result in energy savings, less water consumption, increased depth of colour and better process conditions.     

Using a conductive sphere as a probe to characterize the sensitivity of soft piezoresistive films

Flexible piezoresistive films, such as, carbon black/polydimethylsiloxane (C-PDMS) composites, are often used as skin analogs and integrated into complex array sensors for tactile sensing. The uniformity of the sensor characteristics heavily depends on the homogeneity of the composite. Therefore, the ability to locally characterize a film that will be integrated into a complex force sensor could be critical. Here, a method to characterize the local sensitivity of flexible piezoresistive films is presented. Using a conductive sphere, which was chosen over a flat probe to eliminate misalignment issues, the surface of a thin film composite is indented to characterize the change in resistivity in terms of average strain. Experiments were performed with 15 and 18 wt% carbon black C-PDMS films of varying thickness. The contact radius of the probe with the piezoresistive film was estimated using the Johnson-Roberts-Kendall contact theory. Theoretical contact area estimates were found to agree with contact radius measurements carried out using optically transparent PDMS films observed through an optical microscope. Results show that C-PDMS with 15 wt% carbon black exhibit a higher rate if change of resistivity and gauge factor than films of same thickness with 18 wt% carbon black. On the other hand, thicker films exhibit higher gauge factors for the two tested carbon black contents. Tests carried out at multiple locations yielded consistent sensitivity values, making these types of composites suitable for array type force sensors.     

A Polynomial Time Solution to Minimum Forwarding Set Problem in Wireless Networks under Unit Disk Coverage Model

Network-wide broadcast (simply broadcast) is a frequently used operation in wireless ad hoc networks (WANETs). One promising practical approach for energy-efficient broadcast is to use localized algorithms to minimize the number of nodes involved in the propagation of the broadcast messages. In this context, the minimum forwarding set problem (MFSP) (also known as multipoint relay (MPR) problem) has received a considerable attention in the research community. Even though the general form of the problem is shown to be NP-complete, the complexity of the problem has not been known under the practical application context of ad hoc networks. In this paper, we present a polynomial time algorithm to solve the MFSP for wireless network under unit disk coverage model. We prove the existence of some geometrical properties for the problem and then propose a polynomial time algorithm to build an optimal solution based on these properties. To the best of our knowledge, our algorithm is the first polynomial time solution to the MFSP under the unit disk coverage model. We believe that the work presented in this paper will have an impact on the design and development of new algorithms for several wireless network applications including energy-efficient multicast, broadcast, and topology control protocols for WANETs and sensor networks.     

Free convective flow on a vertical plate with a constant heat flux in the presence of one or more steps

We carried out an experimental investigation of free convective heat transfer on a vertical plate subjected to a constant heat flux in the presence of one or several rectangular steps. Temperature fields were investigated with the help of a Mach-Zehnder interferometer. During the experiment the Rayleigh number changed from zero to Ra=2.8·10³. The flow was observed by the method of track visualization by means of a laser knife. Durectly behind a step we observed a circulating free convective flow having the shape of two oppositely rotating vortices.Academic Scientific Complex A. V. Luikov Heat and Mass Transfer Institute of the Academy of Sciences of Belarus, Minsk, Belarus. Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 67, Nos. 3–4, pp. 190–196, September–October, 1994.     

Diagnostic performance of edited 2HG MR spectroscopy of central glioma in the clinical environment

Magnetic Resonance Materials in Physics, Biology and Medicine - Oncometabolite D-2-hydroxyglutarate (2HG) is pooled in isocitrate dehydrogenase (IDH)-mutant glioma cells. Detecting 2HG by MR...     

Electrohydrodynamic‐Induced SERS Immunoassay for Extensive Multiplexed Biomarker Sensing

Cancer diagnosis and patient monitoring require sensitive and simultaneous measurement of multiple cancer biomarkers considering that single biomarker analysis present inadequate information on the underlying biological transformations. Thus, development of sensitive and selective assays for multiple biomarker detection might improve clinical diagnosis and expedite the treatment process. Herein, a microfluidic platform for the rapid, sensitive, and parallel detection of multiple cancer‐specific protein biomarkers from complex biological samples is presented. This approach utilizes alternating current electrohydrodynamic‐induced surface shear forces that provide exquisite control over fluid flow thereby enhancing target–sensor interactions and minimizing non‐specific binding. Further, the use of surface‐enhanced Raman scattering‐based spectral encoding with individual barcodes for different targets enables specific and simultaneous detection of captured protein biomarkers. Using this approach, the specific and sensitive detection of clinically relevant biomarkers including human epidermal growth factor receptor 2 (HER2); Mucin 1, cell surface associated (MUC1); epidermal growth factor receptor; and Mucin 16, cell surface associated (MUC16) at concentrations as low as 10 fg mL^?1 in patient serum is demonstrated. Successful target detection from patient samples further demonstrates the potential of this current approach for the clinical diagnosis, which envisages a clinical translation for a rapid and sensitive appraisal of clinical samples in cancer diagnostics.     

Biodegradable Microparticles for Simultaneous Detection of Counterfeit and Deteriorated Edible Products

In an era of globalized trade relations where food and pharmaceutical products cross borders effortlessly, consumers face counterfeit and deteriorated products at elevated rates. This paper presents multifunctional, biodegradable hydrogel microparticles that can provide information on the authenticity and the potential deterioration of the tagged food or pharmaceutical formulations. These microparticles integrate spatially patterned authenticity code with two sensors—the first one detects possible presence of pathogenic microbes through monitoring pH while the second one identifies products stored above optimal temperatures via optical monitoring of the microparticle degradation. Particles are synthesized from a biocompatible polymer and a photoinitiator, dextran modified with 2‐hydroxyethylmethacrylate and riboflavin, respectively, using a continuous, high throughput method stop‐flow lithography. The proposed synthesis approach also enables crosslinking with visible light bringing about additional flexibility to flow lithography. Model liquid and solid food and pharmaceutical products are successfully labeled with microparticles and the functionality of the sensors in aqueous solutions is demonstrated.     

A new perspective on data homogeneity in software cost estimation: a study in the embedded systems domain

Cost estimation and effort allocation are the key challenges for successful project planning and management in software development. Therefore, both industry and the research community have been working on various models and techniques to accurately predict the cost of projects. Recently, researchers have started debating whether the prediction performance depends on the structure of data rather than the models used. In this article, we focus on a new aspect of data homogeneity, “cross- versus within-application domain”, and investigate what kind of training data should be used for software cost estimation in the embedded systems domain. In addition, we try to find out the effect of training dataset size on the prediction performance. Based on our empirical results, we conclude that it is better to use cross-domain data for embedded software cost estimation and the optimum training data size depends on the method used.     

A comparative study for estimating software development effort intervals

Software cost/effort estimation is still an open challenge. Many researchers have proposed various methods that usually focus on point estimates. Until today, software cost estimation has been treated as a regression problem. However, in order to prevent overestimates and underestimates, it is more practical to predict the interval of estimations instead of the exact values. In this paper, we propose an approach that converts cost estimation into a classification problem and that classifies new software projects in one of the effort classes, each of which corresponds to an effort interval. Our approach integrates cluster analysis with classification methods. Cluster analysis is used to determine effort intervals while different classification algorithms are used to find corresponding effort classes. The proposed approach is applied to seven public datasets. Our experimental results show that the hit rate obtained for effort estimation are around 90–100%, which is much higher than that obtained by related studies. Furthermore, in terms of point estimation, our results are comparable to those in the literature although a simple mean/median is used for estimation. Finally, the dynamic generation of effort intervals is the most distinctive part of our study, and it results in time and effort gain for project managers through the removal of human intervention.