Landfill side slope lining system performance: A comparison of field measurements and numerical modelling analyses

Low permeability engineered landfill barriers often consist of a combination of geosynthetics and mineral layers. Even though numerical modelling software is applied during the landfill design process, a lack of data about mechanical performance of landfill barriers is available to validate and calibrate those models. Instrumentation has been installed on a landfill site to monitor multilayer landfill lining system physical performance. The lining system comprises of a compacted clay layer overlaid by high density polyethylene geomembrane, geotextile and sand. Data recorded on the site includes: geosynthetic displacements (extensometers), strains (fibre optics, Demec strain gauges, extensometers) and stresses imposed on the liner (pressure cells). In addition, temperature readings were collected by a logger installed at the surface of the geomembrane, at the clay surface using pressure cell thermistors and air temperature using a thermometer. This paper presents readings collected throughout a period of three years and compares this measured performance with the corresponding numerical modelling of the lining system for stages during construction. Numerical modelling predictions of lining system behaviour during construction are comparable with the measurements when the geosynthetics are covered soon after placement, however, where the geosynthetics are left exposed to the sun for an extended period of time, in situ behaviour of the geosynthetics cannot be replicated by the numerical analysis. This study highlights the significant influence of the effect of temperature on geosynthetics displacements. A simple thermal analysis of the exposed geosynthetics is used to support the explanation for observed behaviour.     

Morphological Factors Involved in Adhesion of Acid-Cleaned Diatom Silica

Purpose

Diatoms, unicellular microalgae with silica cell walls, have strong adhesive properties, which are dominated by chemical interactions between secreted organic material and the substrate. Possible technological applications of diatoms are likely to involve the adhesion of silica particles, or derivatives, which have been cleaned of organic material. Because the morphologies of diatom cell walls are far more complex than defined model structures, the relationship between morphology and adhesion for such materials is unknown.

Methods

In this paper we develop a new approach to monitor the adhesion of acid-cleaned diatom silica using parallel-plate flow chambers. We have evaluated factors such as settling time, extent of dryness, and substrate properties, and compared diatom species with silica features differing in size, shape, and percentage of surface contact area.

Results

Results indicated better adhesion of particles with higher surface contact area below a threshold of overall size, and a contribution by the number of possible contact surfaces to initial adhesion. We identified two stages in adhesion response to increasing shear stress. In the first stage, at low shear stress, species-dependent morphology played a major role in determining the strength of adhesion. After loosely adhered particles were removed at low shear, a second stage of persistent adhesion emerged at higher shear stresses. In the second stage, variations in morphology had a much smaller effect on adhesion.

Conclusions

These results identify conditions and fundamental morphological features for adhesion that can be utilized in future technological applications of silica particles with complex shapes.     

Sol–gel-processed silica/polydimethylsiloxane/calcium xerogels as polymeric matrices for Metronidazole delivery system

Silica, silica/polydimethylsiloxane and silica/polydimethylsiloxane/calcium xerogels were examined as polymeric carriers for the controlled release of drug—Metronidazole. Characterization assays comprised analysis of the matrix by Fourier transform infrared spectroscopy (FTIR), determining the specific surface area of solids (BET) and scanning electron microscope (SEM) techniques and further monitoring in the ultraviolet and visible light regions (UV–Vis) of the in vitro release of the drug over time. Using tetramethoxysilane (TMOS) as a precursor of silica matrix and polydimethylsiloxane (PDMS) and calcium ions as additives, xerogels with different morphology and physical properties were obtained. The applied modifications diminished the porosity and hydrophilicity of the silica matrix as well as reduced the release of drug. Based on the presented results of this study, it may be stated that applied xerogel matrices, pure silica (SiO₂) and modified silica (SiO₂–CaO, SiO₂–PDMS and SiO₂–CaO–PDMS), could be promising candidates for the formulation in local delivery systems.     

Synthesis and Structure of Novel Copper(II) Complexes with N,O- or N,N-Donors as Radical Scavengers and a Functional Model of the Active Sites in Metalloenzymes

To evaluate the antioxidant activity of potential synthetic enzyme mimetics, we prepared new five copper(II) complexes via a self-assembly method and named them [Cu(2-(HOCH₂)py)₃](ClO₄)₂ (1), [Cu(2-(HOCH₂)py)₂(H₂O)₂]SiF₆ (2), [Cu₂(2-(HOCH₂CH₂)py)₂(2-(OCH₂CH₂)py)₂](ClO₄)₂ (3), [Cu(pyBIm)₃](BF₄)₂·1.5H₂O (4) and [Cu(py₂C(OH)₂)₂](ClO₄)₂ (5). The synthetic protocol involved N,O- or N,N-donors: 2-(hydroxymethyl)pyridine (2-(HOCH₂)py), 2-(hydroxyethyl)pyridine (2-(HOCH₂CH₂)py), 2-(2-pyridyl)benzimidazole (pyBIm), di(2-pyridyl)ketone (py₂CO). The obtained Cu(II) complexes were fully characterised by elemental analysis, FTIR, EPR, UV-Vis, single-crystal X-ray diffraction and Hirshfeld surface analysis. Crystallographic and spectroscopic analyses confirmed chromophores of both monomeric ({CuN₃O₃} (1), {CuN₂O₄} (2), {CuN₆} (4), {CuN₄O₂} (5)) and dimeric complex ({CuN₂O₃} (3)). Most of the obtained species possessed a distorted octahedral environment, except dimer 3, which consisted of two copper centres with square pyramidal geometries. The water-soluble compounds (1, 3 and 5) were selected for biological testing. The results of the study revealed that complex 1 in solutions displayed better radical scavenging activity than complexes 3, 5 and free ligands. Therefore, complex 1 has been selected for further studies to test its activity as an enzyme mimetic. The chosen compound was tested on the erythrocyte lysate of two groups of patients after undergoing chemotherapy and chemoradiotherapy. The effect of the tested compound (1) on enzyme activity levels (TAS, SOD and CAT) suggests that the selected complex can be treated as a functional mimetic of the enzymes.     

Increased Beta-Hydroxybutyrate Level Is Not Sufficient for the Neuroprotective Effect of Long-Term Ketogenic Diet in an Animal Model of Early Parkinson’s Disease. Exploration of Brain and Liver Energy Metabolism Markers

The benefits of a ketogenic diet in childhood epilepsy steered up hope for neuroprotective effects of hyperketonemia in Parkinson’s disease (PD). There are multiple theoretical reasons but very little actual experimental proof or clinical trials. We examined the long-term effects of the ketogenic diet in an animal model of early PD. A progressive, selective dopaminergic medium size lesion was induced by 6-OHDA injection into the medial forebrain bundle. Animals were kept on the stringent ketogenic diet (1% carbohydrates, 8% protein, 70% fat) for 3 weeks prior and 4 weeks after the brain operation. Locomotor activity, neuron count, dopaminergic terminal density, dopamine level, and turnover were analyzed at three time-points post-lesion, up to 4 weeks after the operation. Energy metabolism parameters (glycogen, mitochondrial complex I and IV, lactate, beta-hydroxybutyrate, glucose) were analyzed in the brain and liver or plasma. Protein expression of enzymes essential for gluconeogenesis (PEPCK, G6PC) and glucose utilization (GCK) was analyzed in the liver. Despite long-term hyperketonemia pre- and post-lesion, the ketogenic diet did not protect against 6-OHDA-induced dopaminergic neuron lesions. The ketogenic diet only tended to improve locomotor activity and normalize DA turnover in the striatum. Rats fed 7 weeks in total with a restrictive ketogenic diet maintained normoglycemia, and neither gluconeogenesis nor glycogenolysis in the liver was responsible for this effect. Therefore, potentially, the ketogenic diet could be therapeutically helpful to support the late compensatory mechanisms active via glial cells but does not necessarily act against the oxidative stress-induced parkinsonian neurodegeneration itself. A word of caution is required as the stringent ketogenic diet itself also carries the risk of unwanted side effects, so it is important to study the long-term effects of such treatments. More detailed metabolic long-term studies using unified diet parameters are required, and human vs. animal differences should be taken under consideration.     

Selected Geometric and Mechanical Properties of Barley (Hordeum Vulgare L.) Grain

The properties of grain of Mauritia and Prestige barley varieties were determined for moisture content of 12.5 and 15.5% wet basis. Broad variations were observed in the relationship between the moisture content of grain, its variety, and the geometric properties of barley. Most of the geometric properties of barley were dependent on both the cultivar studied and the moisture content of grain, while selected characteristics were dependent on moisture content of grain or barley cultivar only. The values of displacement, force and energy required for kernel rapture were lower for Mauritia variety than Prestige variety and were not dependent on the moisture content of grain.     

Crystallographic orientation inhomogeneity and crystal splitting in biogenic calcite

The calcitic prismatic units forming the outer shell of the bivalve Pinctada margaritifera have been analysed using scanning electron microscopy–electron back-scatter diffraction, transmission electron microscopy and atomic force microscopy. In the initial stages of growth, the individual prismatic units are single crystals. Their crystalline orientation is not consistent but rather changes gradually during growth. The gradients in crystallographic orientation occur mainly in a direction parallel to the long axis of the prism, i.e. perpendicular to the shell surface and do not show preferential tilting along any of the calcite lattice axes. At a certain growth stage, gradients begin to spread and diverge, implying that the prismatic units split into several crystalline domains. In this way, a branched crystal, in which the ends of the branches are independent crystalline domains, is formed. At the nanometre scale, the material is composed of slightly misoriented domains, which are separated by planes approximately perpendicular to the c-axis. Orientational gradients and splitting processes are described in biocrystals for the first time and are undoubtedly related to the high content of intracrystalline organic molecules, although the way in which these act to induce the observed crystalline patterns is a matter of future research.     

Dual nonlinear correlator based on computer controlled joint transform processor: Digital analysis and optical results

Abstract

The hybrid optoelectronic processor, presented in this paper, realizes the dual nonlinear correlation (DNC) in a set-up based on a two-step nonlinear joint transform correlator architecture. In the first step three power spectrum distributions (input scene power spectrum, reference target power spectrum, and the joint power spectrum) necessary for the nonlinear processing are captured with a CCD camera. Nonlinear modification of the joint power spectrum, which does not have to be symmetrical in the input and reference channels, is introduced digitally. In the second step, the modified joint power spectrum is Fourier transformed optically. Numerical analysis of this processor shows a crucial influence of the dynamic range and the limited number of grey levels of the CCD camera during image acquisition in the first step, on the output signal parameters and the discrimination capability of the set-up. Optical results of recognition obtained for noise-free segmented input scenes show that the set-up enables the realization of various correlation operations as CMF, POF, IF, PPC, etc. without any filters and that the discrimination capability is easy to control by a proper selection of the type of nonlinear processing.     

Identification of diffusive transport properties of poly(vinyl alcohol) hydrogels from reservoir test

In this paper the identification of diffusion coefficient, retardation factor and surface distribution coefficient for selected salts in poly(vinyl alcohol) hydrogels is performed. The identification of the transport parameters is based on the previously developed inverse problem technique using experimental data from the reservoir test and the solution of the diffusive transport equation with linear equilibrium sorption. The estimated values of diffusion coefficient are: for physiological fluid (6.30 ± 0.10) × 10^? 10 m²/s, for 1 M NaCl (6.42 ± 0.39) × 10^? 10 m²/s, and for 1 M KCl (7.94 ± 0.38) × 10^? 10 m²/s. The retardation factor for all tested materials and salts is equal or close to one. The average value of the effective surface distribution coefficient is equal to 0.5.