Flow around a cubic body immersed in a turbulent boundary layer

This paper reports the results of an experiment concerning flow in the vicinity of a cubic body immersed in a turbulent boundary layer which is fully developed along a tunnel floor. By changing the flow direction and body height, measurements were made of the pressure and drag acting on the body, and of the flow pattern and pressure distribution on the floor. The results indicate the changes taking place in the pressure distribution over the surface of a cubic body, the pressure drag acting on it, and the flow pattern and pressure distribution over the floor surface as the angle of incidence α is varied.     

Reversible crosslinking in cellulose. I. Determination of mercaptan and disulfide in modified cotton

Mercaptan and disulfide contents of modified cotton fabrics could be determined by application of Leach's polarographic method for wool, with minor modification. It was found that mercaptocellulose prepared by the reaction of tosyl cellulose and potassium thiolacetate followed by alkaline hydrolysis contained considerable amounts of disulfided in addition to mercaptain. Iodometric titration of mercaptocellulose gave a higher value of mercaptan than that obtained by the polarographic method. The mercaptan and disulfide contents and methylene blue uptake of the iodine-treated samples indicate that some of the mercaptan groups further undergo oxidation to acidic groups as a result of the iodine treatment. The spatial effect in the oxidation of mercapto groups in modified cotton is briefly discussed.     

Preparation and Properties of Bi4 − x Nd x Ti3O12 Thin Films by Chemical Solution Deposition

Neodymium-modified Bi₄Ti₃O₁₂, (Bi, Nd)₄Ti₃O₁₂ (BNT) ferroelectric thin films have been prepared on Pt/TiO_x/SiO₂/Si substrates using metal-organic precursor solutions by the chemical solution deposition method. The BNT precursor films crystallized into the Bi layered perovskite Bi₄Ti₃O₁₂ (BIT) as a single-phase above 600C. The synthesized BNT films revealed a random orientation having a strong 117 reflection, whereas non-substituted BIT thin films exhibited a random orientation with strong 00l diffractions. Among Bi_{4 – x}Nd_xTi₃O₁₂ [x = 0.0, 0.5, 0.75, 1.0] thin films, Bi_3.25Nd_0.75Ti₃O₁₂ thin films showed a well-saturated P-E hysteresis loop with the highest P_r (22 C/cm²) and a low E_c (69 kV/cm) at an applied voltage of 5 V. The Nd-substitution with the optimum amount for the Bi site in the BIT structure was effective not only for promoting the 117 preferred orientation but also for improving the microstructure and ferroelectric properties of the resultant films.     

Microstructure features of polycrystalline diamond synthesized directly from graphite under static high pressure

Recently, ultra-hard polycrystalline diamond was synthesized from graphite by direct conversion under static high pressure. This paper describes the microstructure features of thus formed polycrystalline diamond. Transmission electron microscopy and electron diffraction have revealed that the polycrystalline diamond has a mixed texture of a homogeneous fine structure and a lamellar structure. The former structure consists of fine-grained diamond particles of several tens of nanometers across, which are randomly oriented. The latter structure has bending diamond layers, which may reflect deformed shapes of locally layered graphite of starting material. The experimental results suggest that diamond particles in the homogeneous fine structure are transformed from graphite in the diffusion process, while diamond layers in the lamellar structure are formed in the martensitic process from graphite via the hexagonal diamond phase. It is also noted that significant grain growth occurred at a high temperature of 2700°C, and the lamellar structure was segmentalized to form new grain boundaries.     

Distribution and fluxes of total and methylmercury in Lake Superior

Despite the importance and size of Lake Superior, little is known regarding the biogeochemical cycling or distribution of mercury within its waters. We present the results from two research cruises on total Hg (HgT) and methylmercury (MeHg) distributions in aqueous and particulate phases, and in offshore sediments. Open waters of Lake Superior are similar in HgT content to Lakes Michigan and Ontario (sub-ng L(-1)), whereas MeHg was only 1% of HgT. Seasonality in aqueous HgT distribution was observed, most likely from tributary inputs during Spring snowmelt. Suspended particles were enriched in MeHg relative to water and surficial sediments, suggesting enhanced particle partitioning followed by demethylation in the water column and in surface sediments. Distribution coefficients for mercury in surficial sediments were lower than those in suspended material, likely due to remineralization. Preliminary estimates of mass balance indicate that air-water exchange processes such as evasion and wet deposition dominate the HgT budget, due to the basin's relatively small watershed area relative to lake area. In contrast, methylmercury cycling within Lake Superior is influenced more strongly by watershed sources, as well as by sedimentary sources and photodemethylation. The Hg cycle in Lake Superior is unique in that it is more similar in many aspects to that in marine systems than in small lakes, where management data for freshwaters typically originates.     

Discrimination of psychoactive fungi (commonly called "magic mushrooms") based on the DNA sequence of the internal transcribed spacer region

'Magic mushrooms' (MMs) are psychoactive fungi containing the hallucinogenic compounds, psilocin (1) and psilocybin (2). Since June 6, 2002, these fungi have been regulated by the Narcotics and Psychotropics Control Law in Japan. Because there are many kinds of MMs and they are sold even as dry powders in local markets, it is very difficult to identify the original species of the MMs by morphological observation. Therefore, we investigated the internal transcribed spacer (ITS) region in the ribosomal RNA gene of MMs obtained in Japanese markets to classify them by a genetic approach. Based on the size and nucleotide sequence of the ITS region amplified by PCR, tested MMs were classified into 6 groups. Furthermore, a comparison of the DNA sequences of the MMs with those of authentic samples or with those found in the databases (GenBank, EMBL and DDBJ) made it possible to identify the species of tested MMs. Analysis by LC revealed that psilocin (1) was contained at the highest level in Panaeolus cyanescens among the MMs, but was absent in the Amanita species.     

Determination of benzimidazole anthelmintics in livestock foods by HPLC

A simple and rapid liquid chromatographic method was developed for the simultaneous determination of twelve benzimidazole anthelmintics in livestock foods using reversed-phase high-performance liquid chromatography with photodiode array detection (PDA). A sample was homogenized with acetonitrile and n-hexane, and centrifuged. The acetonitrile phase was isolated and evaporated. The residue was dissolved in 0.1 mol/L carbonate buffer solution (pH = 9.1), sonicated, and then subjected to clean-up on a Bond Elut LRC-C18 cartridge. The benzimidazole compounds were separated isocratically on a Capcell Pak C18 UG 120 (5 microns, 150 x 4.6 mm i.d.) column and detected by PDA at 295 and 313 nm. Mixtures of acetonitrile and 0.05 mol/L ammonium acetate in mixing ratios of (20:80) and (40:60) were used as the mobile phase, and the flow-rate was 1.0 mL/min at 40 degrees C. The mean recoveries (n = 3) from 0.1-0.5 microgram/g added samples were 72.6-97.2% with coefficients of variation of 0.3-8.5%. The detection limits were 0.01-0.05 microgram/g.     

A novel anionic surfactant templating route for synthesizing mesoporous silica with unique structure

Anionic surfactants are used in greater volume than any other surfactants because of their highly potent detergency and low cost of manufacture. However, they have not been used as templates for synthesizing mesoporous silica. Here we show a templating route for preparing mesoporous silicas based on self-assembly of anionic surfactants and inorganic precursors. We use aminosilane or quaternized aminosilane as co-structure-directing agent (CSDA), which is different from previous pathways. The alkoxysilane site of CSDA is co-condensed with inorganic precursors; the ammonium site of CSDA, attached to silicon atoms incorporated into the wall, electrostatically interacts with the anionic surfactants to produce well-ordered anionic-surfactant-templated mesoporous silicas (AMS). These have new structures with periodic modulations as well as two-dimensional hexagonal and lamellar phases. The periodic modulations may be caused by the coexistence of micelles that differ in size or curvature, possibly owing to local chirality. These mesoporous silicas provide a new family of mesoporous materials as well as shedding light on the structural behaviour of anionic surfactants.     

Preparation and phase transition of Gd4(Al1 − xGax)2O9 solid solutions

The solid-solution compounds of Gd₄(Al_{1 – x} Ga _x )₂O₉ (x = 0.0–1.0) were prepared at 1600°C for 5 h in air. The unit cell volume of the compounds increased from 0.853 to 0.878 nm³ with x. Phase transitions having a temperature hysteresis were observed from 1100° to 1400°C by calorimetry and dilatometry. The transition temperature increased with x. The volume of the high-temperature phase was 0.5% smaller than that of the low-temperature phase at the transition temperature. The volume changes were independent of x. The hysteresis width observed by the dilatometry was about 300°C for the Gd₄Al₂O₉ ceramics (grain size: about 1 m) and decreased to 50°C for the Gd₄(Al_0.2Ga_0.8)₂O₉ ceramics (grain size: over 10 m). Gd₄Ga₂O₉ was unstable at low temperature and decomposed to Gd₃GaO₆ and Gd₃Ga₅O₁₂ during the thermal analyses.