溶胶-凝胶生物玻璃多孔材料显微结构和生物活性的扫描电镜及红外光谱分析

本文利用溶胶．凝胶法制备了CaO-P2O5-SiO，系统生物活性玻璃，并以其为原料制备了用于骨修复及骨组织工程支架的块状生物活性材料。利用体外实验方法(invitro)结合x射线衍射(XRD)、扫描电子显微镜(SEM)和傅立叶变换红外光谱分析(FTIR)技术对不同烧结工艺制备的材料结构、晶相和生物活性的影响进行了分析研究。研究表明，经800℃和1100℃烧结5min的两种材料均有硅磷酸钙Ca5(PO4)2SjO4微晶相析出。烧结温度越高，析出微晶相的体积比例越大，材料的生物活性则越低。在模拟生理溶液中碳酸羟基磷灰石(HCA)只在烧结体中的玻璃颗粒表面形成，而在其硅磷酸钙Ca5(PO4)2SiO4微晶相表面未发现HCA形成。     

东方红浆砌石重力坝扬压力安全评价

东方红水库大坝是一座运行近40a的浆砌石重力坝，坝体裂缝、坝体渗漏及坝体碳化严重，扬压力有逐年增高的趋势。本文利用坝基扬压力测压管水位观测资料建立了测压管水位的统计模型，并结合现场渗漏实测流量资料建立了渗流反分析模型，详细分析了坝基的渗流性态和扬压力状态，并对其渗流性态做出安全评价。     

活性炭的制备及应用新进展

综述了活性炭材料研究开发的新进展。重点介绍了煤、石油焦、沥青基活性炭的制备方法及针对不同用途的活性炭改性技术，为选择合适的活化方法和制备特殊功能的改性活性炭提供了参考。     

A practical SPICE model based on the physics and characteristics of realistic single-electron transistors

A practical model for a single-electron transistor (SET) was developed based on the physical phenomena in realistic Si SETs, and implemented into a conventional circuit simulator. In the proposed model, the SET current calculated by the analytic model is combined with the parasitic MOSFET characteristics, which have been observed in many recently reported SETs formed on Si nanostructures. The SPICE simulation results were compared with the measured characteristics of the Si SETs. In terms of the bias, temperature, and size dependence of the realistic SET characteristics, an extensive comparison leads to good agreement within a reasonable level of accuracy. This result is noticeable in that a single set of model parameters was used, while considering divergent physical phenomena such as the parasitic MOSFET, the Coulomb oscillation phase shift, and the tunneling resistance modulated by the gate bias. When compared to the measured data, the accuracy of the voltage transfer characteristics of a single-electron inverter obtained from the SPICE simulation was within 15%. This new SPICE model can be applied to estimating the realistic performance of a CMOS/SET hybrid circuit or various SET logic architectures.     

Current distribution, resistance, and inductance forsuperconducting strip transmission lines

A method for the calculation of the current distribution, resistance, and inductance matrices for a system of coupled superconducting transmission lines having finite rectangular cross-section is presented. These calculations allow accurate characterization of both high-T_c and low-T _c superconducting strip transmission lines. For a single stripline geometry with finite ground planes, the current distribution, resistance, inductance, and kinetic inductance are calculated as functions of the penetration depth for various film thicknesses. These calculations are then used to determine the penetration depth for Nb, NbN, and YBa₂Cu₃O_7-x superconducting thin films from the measured temperature dependence of the resonant frequency of a stripline resonator. The calculations are also used to convert measured temperature dependence of the quality factor to the intrinsic surface resistance as a function of temperature for an Nb stripline resonator     

TiAl＋Sb合金的热稳定性的研究

研究了退火处理对Ｔｉ－３４ｗｔ．％Ａｌ－０．５ｗｔ．％Ｓｂ合金的室温抗弯性能，显微组织，相组成和断口形貌的影响。发现，低于１０００℃退火处理，ＴｉＡｌ＋Ｓｂ合金的显微组织没有变化，其力学性能仍然保持较高的值。此合金成分适应高温使用条件。     

���þ��ܰ�ȫ�Բ�������������

本文通过对在用钻机井架的现场实际测试,建立数据库、测评模型,对实测的数据用计算机技术进行分析,提出了初始弯曲应力;数据正态分布检验——x～2检验;建立回归方程;在给定置信度下测评当前承载能力的技术概念。解决了在用钻机A型井架的安全性评估问题,是一种较为合理、可靠、科学的测评技术和方法。     

溶胶－凝胶法制备Pb（Zr，Ti）O_3玻璃陶瓷过程中的结构变化

本文介绍溶胶－凝胶法制备均匀ＰｂＺｒ－Ｔｉ－Ｂ－Ｓｉ凝胶玻璃，并通过适当热处理在凝胶玻璃中原位生长Ｐｂ（Ｚｒ；Ｔｉ）Ｏ３微晶的新工艺·利用ＩＲ谱考察了凝胶玻璃中的元素键合结构随温度的变化．结合热分析和ＸＲＤ；ＳＥＭ技术，研究了Ｐｂ（Ｚｒ，Ｔｉ）Ｏ３微晶在凝胶玻璃中的生长过程及该材料的结构特点．发现Ｐｂ２（Ｚｒ，Ｔｉ）２Ｏ６＋ｘ立方焦绿石介稳过渡相的纳米微晶首先出现于该体系中，并在更高的温度下先后完全转变成三方和四方Ｐｂ（Ｚｒ，Ｔｉ）Ｏ３钙钛矿相．电子显微观察结果表明，该工艺制备的Ｐｈ（Ｚｒ；Ｔｉ）Ｏ３玻璃陶瓷具有均匀的细晶结构．     

Spatial memory deficits following stimulation of hippocampal 5-HT1B receptors in the rat

The authors review the principles of reconstructive surgery for lower limb salvage after severe lower limb trauma to determine factors that have been used as decision-making criteria for limb salvage or amputation in severe lower extremity injuries and the methods of reconstruction and their outcome. The use of scoring systems and their value in acute decision making (primary amputation or limb salvage) are described. Soft-tissue reconstructive techniques, with emphasis on the use of flaps and the importance of selecting the best technique and time for the reconstruction are reviewed. Skeletal reconstructive techniques are described, including available options and currently held views on indications and use of the best contemporary methods. It is essential for the physician to make a good initial decision on the need for primary amputation or limb salvage. A multidisciplinary approach is fundamental to successful salvage.