Polymerization via zwitterion 25. Alternating copolymerizations of cyclic acyl phosphorite and phosphite with vinyl monomers having an electron withdrawing group

Summary Spontaneous copolymerizations of cyclic acyl phosphonite (SPO) and phosphite (SPI) with an electron-deficient vinyl monomer such as methyl acrylate (MA), methyl vinyl ketone (MVK), and acrolein (AL), gave the corresponding alternating copolymers. These copolymerizations took place without added initiator and proceeded through zwitterion intermediates. Copolymer structures 1a, 1b, 2 and 3 have been established, all of which were derived in a regiospecific manner of ambident anions. The scheme of the copolymerizations is presented.     

Cationic ring-opening polymerization of 2-phenyl-1,3,6,2-trioxaphosphocane

Summary The ring-opening polymerization of 2-phenyl-1,3,-6,2-trioxaphosphocane (4), an eight-membered cyclic phosphonite, has been investigated. Cationic initiators of PhCH₂-Cl and MeOTf gave polymers, whereas anionic and radical initiators did not yield polymer. The structure of polymer was examined by IR, ¹H, ³¹P, and ³¹C NMR spectroscopy of polymers and elemental analysis as well as the alkaline hydrolysis products. The polymer consisted of two different units, i.e., the major part is the normal phosphinate structure 5 and the minor part is the isomerized unit 6 in 7% with PhCH₂Cl initiation and in 34% with MeOTf initiator. The difference in nature of propagating species from these two initiators are discussed in connection with their reactivities.On leave from the Institute of Chemistry, Academia Sinica, Beijing, China     

Cationic ring-opening polymerization of 2-phenyl-1,2-oxaphospholane (deoxophostone)

Summary The ring-opening polymerization of deoxophostone 5, a five-membered cyclic phosphinite, has been studied. Some cationic initiators gave polymer whereas anionic and radical initiators as well as metal chloride (Lewis acid) catalysts did not yield polymer. The polymer consisted of a phosphine oxide repeating unit 6. The polymerization proceeded via the Arbuzov-type reaction. The reduction of polymer 6 with a HSiCl₃/Et₃N system gave polyphosphine 7.     

A novel spin-finishing method for antistatic modification of polyester fiber. Surface reaction onto amine-containing copoly(amide-ethers) blended with polyester fiber

Copoly(amide-ethers) containing two types of tertiary amine units were made as antistatic modifiers for poly(ethylene terephthalate) (PET) fibers. The filaments of the copolymers were melt-spun and reacted with three alkylating agents in order to quaternize the tertiary amine into a sulfo-betaine, a carbobetaine, and an ammonium ion. The apparent electric resistivity of the filaments was greatly reduced by this reaction, being in the range of 10⁶ to 10⁸ Ω/cm. However, because these quaternized copolymers incurred decomposition during blend spinning with PET, a blend PET fiber containing one type of copoly(amide-ether) was melt-spun and subjected to quaternization of the amino groups as well as to surface crosslinking with various alkylating and epoxy agents. The quaternized blend fibers obtained showed improved antistatic properties compared with the original blend fiber. Particularly, the fibers crosslinked with epoxy compounds were found to have the best antistatic properties that had ever been attained with this type of modification. The antistatic properties were retained even after dyeing, because both hydrophilic and ionic groups had been effectively immobilized on the surface. Since this quaternization and crosslinking could be conducted on-line with spinning and drawing within a short reaction time, this modification technique is called “spin-finishing method”, which should be superior to the conventional methods in terms of cost performance and productivity.     

New ring-opening polymerization via a π-allylpalladium complex

Summary A binary system of a palladium complex as catalyst and zinc alkoxide as initiator conducted a novel ring-opening polymerization of cyclic carbonate, i. e., 5,5-dimethyl-4-ethenyl-1,3-dioxan-2-one. The polymerization proceeded along with releasing carbon dioxide to produce the corresponding polyether. The -allylpalladium complex generated from the monomer with the catalyst is the key intermediate for this new polymerization. The propagating end is zinc alkoxide, which nucleophilically attacks the monomer activated as the -allylpalladium complex in the propagation.     

PbTiO3–PbO–SiO2 Glass-Ceramic Thin Film by a Sol–Gel Process

PbTiO₃(PT)-PbO-SiO₂ glass-ceramic thin films were pro-duced by a sol-gel process. The crystallization of PT oc-curred at ∼700°C and was higher than that in PT-PbO-B₂ O₃ sol-gel glass-ceramics. A pinhole-free thin film was obtained by a rapid thermal annealing process when the designed glass-forming phase content in the thin film was >24 vol%. The measured dielectric constants of the films fairly agreed with the predicted values, based on a parallel mixing model. The dielectric constant was 219 and the di-electric loss was 0.04 in the 0.6PT-0.4(PbO-SiO₂) film that was fired at 700°C.     

New amphoteric surfactants containing a phosphoric acid group: I. syntheses and physicochemical properties of sodium 2-(n-2-hydroxyalkyl-n-methylamino)ethyl hydrogen phosphate

A series of new amphoteric surfactants having a phosphoric acid group, a tertiary amino group and a 2-hydroxyalkyl group, sodium 2-(N-2-hydroxyalkyl-N-methyl-amino)ethyl hydrogen phosphates (alkyl: n-tetradecyl, n-hexadecyl, n-octadecyl), were prepared by an addition reaction of 1,2-epoxyalkanes to N-methylaminoethanol, followed by the introduction of a phosphoric acid group and neutralization with sodium hydroxide. The structures of these compounds were confirmed by spectroscopy and elemental analysis. The solubility in solvents, Krafft point, surface tension, critical micelle concentration (CMC), occupation area of the molecule at the surface of aqueous solutions and foaming power were measured. It was shown that a 2-hydroxyethyl group in a long alkyl chain seemed to behave as a hydrophobic part.     

The degradation of polystyrene during extrusion

An investigation was made of the magnitude and mechanism of shear degradation of a narrow distribution, high molecular weight (M_w = 670,000) polystyrene. An Instron rheometer was used to perform the extrusion at temperatures from 164° to 250°C. The change in molecular weight distribution was studied by gel permeation chromatography. The maximum shear stress employed was 5.83 kg/cm². It was found that degradation could be induced at high stress at temperatures of 50°C lower than degradation of polystyrene would occur exclusively due to thermal forces. An activation energy for the degradation, calculated at constant shear rate, was +20.2 kcal/mole. The direction and magnitude of this value are consistent with degradation induced through a mechanical reduced activation for thermal degradation.     

Concentration of acetic acid in sulfite pulp evaporation drain by reverse osmosis

The evaporation drain of sulfite pulp spent liquor contains few volatile fatty acids, most of which is acetic acid. The main objective of this study is to recover acetic acid as the concentrated solution (about 4%), which could be used as a culture medium of the yeast. As acetic acid can easily pass through the cellulose acetate membrane, SP drains neutralized by NaOH, NH₄OH and Ca(OH)₂ were used as the feed solutions. In all cases, concentration by reverse osmosis was successfully carried out provided the appropriate pretreatment was employed. The recovery of acetic acid was 95.6, 90.5 and 98.2% for Na-, NH₄-, and Ca-drain, respectively. In addition, the recovered (permeated) water may be used as an industrial one.     

1-O-alkyl-2,3-diacylglycerols in the skin surface lipids of the hairless mouse

A neutral lipid class was isolated by thin-layer chromatography from the skin surface lipids of the hairless mouse. The fraction migrated faster than triglycerides and had a migration rate similar to that of diacyl alkanediols (diester wax). Upon deacylation, however, the long-chain diols were identified as 1-alkylglycerol ethers based on their chromatographic properties and on the mass spectra of their nicotinylidene derivatives. Thus, the skin lipid fraction was identified as 1-O-alkyl-diacylglycerol. The alkyl moieties were all saturated and even-numbered and ranged in chainlength from C₁₆ to C₂₂ with 1-O-hexadecylglycerol amounting to 34% of the total glycerol ether moieties. The fatty acids derived from this lipid fraction were mostly monoenoic with chainlengths ranging from C₁₆ to C₂₄. The major acyl component was eicosenoic acid (20∶1) representing 61% of the total fatty acids.