Enzymatic esterification of glycerol I. Lipase-catalyzed synthesis of regioisomerically pure 1,3-sn-diacylglycerols

Regioisomerically pure 1,3-sn-diacylglycerols are conveniently prepared in high yields (>80%) and in large quantities by enzymatic esterification of glycerol in the presence of various 1,3-selective lipases(Chromobacterium viscosum, Rhizopus delemar, Rhizomucor miehei) and a variety of different acyl donors like free fatty acids, fatty acid alkyl esters and vinyl esters. All reactions are carried out in aprotic organic solvents of low water content, namelyn-hexane, diethyl ether or tBuOMe. The creation of an artificial interphase between the solvent-immiscible hydrophilic glycerol and the hydrophobic reaction media by the adsorption of glycerol onto a solid support prior to use was essential for the success of these transformations. The effects of reaction conditions and the regioselectivities of the lipases on the product yields are described in detail.     

Novel dielectrics from IPNs derived from castor oil based polyurethanes

Three series of interpenetrating polymer networks (IPNs) based on a polyurethane (castor oil + toluene diisocyanate) with polystyrene, poly(methyl methacrylate), and poly(n-butyl methacrylate) were synthesized and characterized. Dielectric relaxation studies of these IPNs were carried out from ?150 to 100°C in the 100 Hz to 100 kHz range. The effects of structural variables such as composition, type of vinyl monomer, as well as the effect of interaction of the phases on the dielectric properties were studied. A certain degree of phase mixing was observed to exist in all series as detected by the variation of the glass-transition temperatures of the IPNs. Maxwell–Wagner–Sillars polarization at the interface of the two phases was observed. © 1994 John Wiley & Sons, Inc.     

Activity coefficients of Na2O in molten NaCl,Na2SO4, and Na2CO3

Measurements of the cell

have been used to determine activity coefficients of Na₂O in molten NaCl, Na₂SO₄ and Na₂CO₃. Extreme negative deviations from Raoult's law were observed (γ < 10^?3). In NaCl and Na₂SO₄, γ is independent of concentration below 1 m/o Na₂O, but in Na₂CO₃, the activity is nearly independent of concentration, probably because the oxide reacts with dissolved O₂ to form superoxide (O^?₂).     

Polyurethane–urea anionomer dispersions. I

Polyurethane–urea anionomer dispersions with different stoichiometric DMPA/polyol and NCO/OH ratios were preapred from poly(oxypropylene)glycol, toluene diisocyanate (TDI), dimethylolpropionic acid (DMPA), and ethylenediamine (EDA). The dispersion-cast films were prepared and characterized by mechanical properties, dynamic mechanical analysis (DMA), and differential scanning calorimetry (DSC). Increasing the hard-segment content by either increasing the DMPA/polyol or the NCO/OH ratios affects the glass transition temperature (T_g) of the soft segments. © 1994 John Wiley & Sons, Inc.     

Increasing profit by improving gas handling systems

The availability of a smelter’s gas handling systems is crucial to the profitability of the plant. In new projects, the best technical and economic result is achieved if the gas handling systems are integrated into the process. This integration requires close cooperation between the smelter process designer and the gas handling designer. In modernization projects, environmentally, economically, and technically feasible solutions can be found, and smelter productivity can be increased when imagination and new technology are applied.     

Level set topology optimization of cooling and heating devices using a simplified convection model

This paper studies topology optimization of convective heat transfer problems in two and three dimensions. The convective fluxes are approximated by Newton’s Law of Cooling (NLC). The geometry is described by a Level Set Method (LSM) and the temperature field is predicted by the eXtended Finite Element Method (XFEM). A constraint on the spatial gradient of the level set field is introduced to penalize small, sub-element-size geometric features. Numerical studies show that the LSM-XFEM provides improved accuracy over previously studied density methods and LSMs using Ersatz material models. It is shown that the NLC model with an iso-thermal fluid phase may over predict the convective heat flux and thus promote the formation of very thin fluid channels, depending on the Biot number characterizing the heat transfer problem. Approximating the temperature field in the fluid phase by a diffusive model mitigates this issue but an explicit feature size control is still necessary to prevent the formation of small solid members, in particular at low Biot numbers. The proposed constraint on the gradient of the level set field is shown to suppress sub-element-size features but necessitates a continuation strategy to prevent the optimization process from stagnating as geometric features merge.     

A logarithmic complexity divide-and-conquer algorithm for multi-flexible-body dynamics including large deformations

A new algorithm is presented for the modeling and simulation of multi-flexible-body systems. This algorithm is built upon a divide-and-conquer-based multibody dynamics framework, and it is capable of handling arbitrary large rotations and deformations in articulated flexible bodies. As such, this work extends the current capabilities of the flexible divide-and-conquer algorithm (Mukherjee and Anderson in Comput. Nonlinear Dyn. 2(1):10–21, 2007), which is limited to the use of assumed modes in a floating frame of reference configuration. The present algorithm utilizes the existing finite element modeling techniques to construct the equations of motion at the element level, as well as at the body level. It is demonstrated that these equations can be assembled and solved using a divide-and-conquer type methodology. In this respect, the new algorithm is applied using the absolute nodal coordinate formulation (ANCF) (Shabana, 1996). The ANCF is selected because of its straightforward implementation and effectiveness in modeling large deformations. It is demonstrated that the present algorithm provides an efficient and robust method for modeling multi-flexible-body systems that employ highly deformable bodies. The new algorithm is tested using three example systems employing deformable bodies in two and three spatial dimensions. The current examples are limited to the ANCF line or cable elements, but the approach may be extended to higher order elements. In its basic form, the divide-and-conquer algorithm is time and processor optimal, yielding logarithmic complexity O(log(N _b )) when implemented using O(N _b ) processors, where N _b is the number of bodies in the system.