Commercial process for mass production of synthetic natural gas through the adiabatic reactors: operational characteristics of a 50‐kW pilot‐plant,influence of steam,and CO2

In synthetic natural gas (SNG) reaction process, the water gas shift (WGS) reaction and methanation reaction take place simultaneously, and an insufficient supply of steam might deactivate the catalyst. In this study, the characteristics of the methanation reaction with a commercial catalyst and using a low [H₂]/[CO] mole ratio in SNG synthesis are evaluated. The reaction characteristics at various possible process parameters are evaluated varying different process parameters such as the [H₂O]/[CO] mole ratio, [H₂]/[CO] mole ratio, flow of different % CO₂, and reaction temperature. Temperature profiles on catalyst bed are monitored as a function of the [H₂O]/[CO] mole ratio, [H₂]/[CO] mole ratio, and flow of different % CO₂. Through a lab‐scale optimization process, suitable optimum conditions are selected and in the same condition a 50‐kW pilot‐scale SNG production process through adiabatic reactors is carried out. The pilot scale SNG reaction is stable through overnight and the CO conversion efficiency and CH₄ selectivity are 100% and 97.3%, respectively, while the maximum CH₄ productivity is 0.654 m³/kg_cat · h. Copyright © 2016 John Wiley & Sons, Ltd.     

Conductive adhesive with transient liquid‐phase sintering technology for high‐power device applications

A highly reliable conductive adhesive obtained by transient liquid‐phase sintering (TLPS) technologies is studied for use in high‐power device packaging. TLPS involves the low‐temperature reaction of a low‐melting metal or alloy with a high‐melting metal or alloy to form a reacted metal matrix. For a TLPS material (consisting of Ag‐coated Cu, a Sn96.5‐Ag3.0‐Cu0.5 solder, and a volatile fluxing resin) used herein, the melting temperature of the metal matrix exceeds the bonding temperature. After bonding of the TLPS material, a unique melting peak of TLPS is observed at 356 °C, consistent with the transient behavior of Ag₃Sn + Cu₆Sn₅ → liquid + Cu₃Sn reported by the National Institute of Standards and Technology. The TLPS material shows superior thermal conductivity as compared with other commercially available Ag pastes under the same specimen preparation conditions. In conclusion, the TLPS material can be a promising candidate for a highly reliable conductive adhesive in power device packaging because remelting of the SAC305 solder, which is widely used in conventional power modules, is not observed.     

Flexible Piezoelectric Acoustic Sensors and Machine Learning for Speech Processing

Flexible piezoelectric acoustic sensors have been developed to generate multiple sound signals with high sensitivity, shifting the paradigm of future voice technologies. Speech recognition based on advanced acoustic sensors and optimized machine learning software will play an innovative interface for artificial intelligence (AI) services. Collaboration and novel approaches between both smart sensors and speech algorithms should be attempted to realize a hyperconnected society, which can offer personalized services such as biometric authentication, AI secretaries, and home appliances. Here, representative developments in speech recognition are reviewed in terms of flexible piezoelectric materials, self-powered sensors, machine learning algorithms, and speaker recognition.     

Development of a noble aluminum-pigmented metallic polymer: Recommendations for visible flow and weld line mitigation

We investigated the appearance of flow and weld lines when metallic pigments are used in polymer blends and how such lines can be eliminated by improving the pigment particle shape and optimizing pigment loading. Acrylonitrile butadiene styrene copolymer and two types of aluminum flakes, lamellar and three-dimensional (3D), were blended in a twin-screw extruder with a screw diameter of 25 mm. The temperatures from the hopper to the nozzle were 140, 180, 220, 220, 220, 220, and 220°C. Weld and flow lines were observed using field-emission scanning electron microscopy and energy dispersive X-ray spectroscopy of specially manufactured injection specimens. In the flow line region, traditional lamellar flakes were randomly oriented, while 3D flakes exhibited a distinct and stable orientation. Based on these observations, flow and weld lines in a finished metal/polymer blend can be minimized by using 3D metal particles in place of lamellar flakes. We also investigated the effects of aluminum flake loading on weld and flow line visibility. At low loading, weld lines were clearly visible due to the lack of pigmentation in the front of the polymer flow. Conversely, high loading resulted in relatively high concentrations of pigment near the weld line area, reducing weld line visibility. These findings suggest that there is an optimum metal loading level where the visibility of flow and weld lines is minimized.     

Effects of Fe2O3 doping on structural and electrical properties of 8 mol% yttria-stabilized zirconia electrolyte for solid oxide fuel cells

Journal of Materials Science: Materials in Electronics - The effects of doping a trace of Fe2O3 on the structural and electrical properties of 8 mol% yttria-stabilized zirconia (8YSZ) are...     

Influence of Y2O3 addition on electrical properties of β-SiC ceramics sintered in nitrogen atmosphere

The influence of Y₂O₃ addition on electrical properties of β-SiC ceramics has been investigated. Polycrystalline SiC samples obtained by hot-pressing SiC–Y₂O₃ powder mixtures in nitrogen (N) atmosphere contain Y₂O₃ clusters segregated between SiC grains. Y₂O₃ forms a Y–Si-oxycarbonitride phase during sintering by reacting with SiO₂ and SiC and by dissolution of N from the atmosphere; this induces N doping into the SiC grains during the process of grain growth. The SiC samples exhibit an electrical resistivity of ～10^?3 Ω cm and a carrier density of ～10²⁰ cm^?3, which are ascribed to donor states derived from N impurities. The increase in defect density with increasing Y₂O₃ content is likely to be a main limiting factor of the electrical conductivity of SiC ceramics.     

Isolation and identification of an antiproliferative substance from fructose–tyrosine Maillard reaction products

We isolated a substance from fructose–tyrosine Maillard reaction products (MRPs) and investigated its antiproliferative effect on six human cancer cell lines. The ethyl acetate fraction of fructose–tyrosine MRPs showed a strong antiproliferative effect; this fraction was isolated and purified using silica gel column chromatography, semipreparative RP-HPLC, and recycling HPLC. The structure of the purified compound was determined using spectroscopic methods. The isolated compound was identified as 2,4-bis(p-hydroxyphenyl)-2-butenal (C₁₆H₁₄O₃, HPB242). HPB242 inhibited cell growth in a dose-dependent manner (10–80 μg/ml) on the six human cancer cell lines. The IC₅₀ values of HPB242 on the six human cancer cell lines were 17.34 μg/ml (MCF-7), 29.21 μg/ml (HCT-116), 34.57 μg/ml (H-460), 34.87 μg/ml (HepG2), 48.77 μg/ml (PC-3), and 55.83 μg/ml (MKN-45).     

Effects of hydrogen concentration on the emission and heat transfer of a premixed LPG-hydrogen flame

This paper describes an experimental study of the effect of hydrogen concentration on the emission and heat transfer characteristics of a laminar premixed LPG-hydrogen flame. The mole fraction of hydrogen in the fuel mixture was varied from 0% to 50%. The equivalence ratio of the fuel/air mixture was kept at stoichiometry and the mixture jet Reynolds number was fixed at Re = 1500 for most of the tests. The results show that upon varying hydrogen content in the fuel mixture, there is a corresponding change in the appearance, pollutant emissions and heat transfer characteristics of the flame.     

Determination of total arsenic content and arsenic speciation in different types of rice

Food Science and Biotechnology - The objectives of this study was to examine the amount of total arsenic and arsenic speciation in different types of rice from two areas in Korea using inductively...     

A prioritization method for replacement of water mains using rank aggregation

Pipe breaks in municipal water distribution networks may cause serious damage economically and socially. Existing methods for replacement scheduling of pipes do not provide practical indicators for replacing an individual deteriorated pipe. This work formulates the selection problem as the decision of preference ordering or ranking and proposes a bipartite ranking-based approach. The suggested approach also considers loss from broken pipes in terms of the costs associated with broken water main and its repair. We use rank aggregation method to integrate multiple ranks into replacement order of water mains. The suggested framework prioritizes current pipe sections for replacement based on the aggregated ranks. Multiple ranks given by the reliability of water pipe sections are aggregated and a cost effective policy for pipe replacement is derived.