Carbohydrate type and amount alter intravascular processing and catabolism of plasma lipoproteins in guinea pigs

To test the effects of exchanging dietary complex and simple carbohydrate for fat calories on lipoprotein metabolism, guinea pigs were fed two different fat/carbohydrate ratios: 2.5∶58% (w/w) or 25∶29% (w/w) with either sucrose or starch as the carbohydrate source. Animals fed high-fat had higher plasma low-density lipoprotein (LDL) and hepatic cholesterol concentrations than animals fed low-fat diets (P<0.01). The cholesteryl ester content per particle was higher, and the number of triacylglycerol (TAG) molecules was lower in very low density lipoprotein (VLDL) and LDL from animals fed high-fat diets. Intake of high-fat/sucrose resulted in higher plasma LDL concentrations than intake of high-fat/starch, and animals fed low-fat/starch had the highest plasma TAG concentrations associated with VLDL particles containing more TAG molecules, as well as a TAG-enriched LDL. The activity of plasma lecithin cholesteryl:acyl transferase (LCAT) was highest in animals fed high-fat/sucrose, and heart lipoprotein lipase (LPL) activity was higher in animals fed high-fat diets. Hepatic apoprotein B/E (apo B/E) receptor number (B_max) was increased 21% with low-fat diets (P<0.01). These results suggest that the hypercholesterolemia induced by high-fat and by sucrose intake are associated with a higher plasma LCAT activity which results in a cholesteryl ester-enriched VLDL which, by the action of LPL, might be more readily converted to LDL through the delipidation cascade leading to downregulation of hepatic apo B/E receptors. The hypertriglyceridemia associated with low-fat intake may result from increased production of VLDL TAG, which would explain the increased TAG content and the higher TAG/CE ratio of VLDL from animals fed the low-fat/starch diet.     

Synthesis of deuterated cyclopropene fatty esters structurally related to palmitic and myristic acids

To develop a synthesis of tritiated cyclopropene fatty acids (CPFA), compounds that should prove useful for affinity labeling of desaturases in insect pheromone biosynthetic studies, a series of novel, selectively deuterated CPFA analogues was prepared and characterized. In methyl [16-²H]12,13-methylene-12-hexadecenoate, the incorporation of deuterium was achieved by treatment of the corresponding ω-chloro derivative with sodium borodeuteride in dimethylsulfoxide at 70°C for 24 h (67% yield) following conventional procedures. Alkylation of the tetrahydropyranyl derivative of 13-tridecynol in the presence of lithium diisopropylamide in tetrahydrofuran at −20°C with 1-chloro-3-iodopropane in hexamethylphosphoramide, followed by Jones oxidation of the crude product, yielded 16-chloro-12-hexadecynoic acid (54%), which was esterified to the corresponding methyl ester by treatment with potassium carbonate and methyl iodide in dimethylformamide. Treatment of this acetylenic ester with ethyldiazoacetate in the presence of activated copper-bronze as catalyst followed by hydrolysis in KOH solution at room temperature yielded 16-chloro-12,13-(carboxymethylene)-12-hexadecenoic acid. This diacid was treated with excess oxalyl chloride to give the corresponding diacyl chloride, which was decarbonylated in a diethyl ether solution with zinc chloride, and the cyclopropenium ions thus formed were added at −40°C to a methanolic sodium hydroxide solution of sodium borohydride to give methyl 16-chloro-12,13-methylene-12-hexadecenoate. Analogous procedures were followed to prepare methyl [17-²H]10,11-methylene-10-hexadecenoate, methyl [17-²H]11,12-methylene-11-hexadecenoate and methyl [17-²H]12,13-methylene-12-hexadecenoate from the corresponding diacids using sodium borodeuteride in the reduction of the cyclopropenium ions. Alternatively, methyl [2,2,3,3-²H₄]hexadecynoate, prepared by reaction of methyl 2,11-hexadecadiynoate with magnesium in deuterated methanol at room temperature, was submitted to the above cyclopropenylation and reductive decarbonylation sequence to give methyl [2,2,3,3,17-²H₅]-11,12-methylene-11-hexadecenoate. In summary, complementary methods for the selective incorporation of one to five deuterium atoms into cyclopropene fatty acids, at different sites, in moderate to high yields have been developed. The methods should easily be applicable to the preparation of the corresponding tritiated analogues.     

New N,O-containing ligands for the biomimetic copper-catalyzed polymerization of 2,6-dimethylphenol

Poly(2,6-dimethyl-1,4-phenylene ether) (PPE), which is widely used in high-performance engineering plastics, is obtained by the copper-catalyzed oxidative coupling of 2,6-dimethylphenol. The oxidative polymerizations have been carried out in acetonitrile with structurally related [copper-(N,O-containing ligand)] complexes as the catalyst precursor compounds, which appeared to be of great interest for a better understanding of the factors influencing the catalytic activities. Steric effects (influence of a methyl group close to the metal center; ligands 4–7) or electronic effects (imino versus amino group; ligands 4, 5, 8 and 6, 7, 9, respectively) on the polymerization rates have been demonstrated. The use of mono- or dinucleating ligands has strengthened the proposed mechanism of the reaction involving dinuclear active species.     

Sulfate attack of concrete building foundations induced by sewage waters

A case history of a severe degradation of concrete foundation plinths and piers of an about-35-year-old building located in Northern Italy is described. Significant amounts of gypsum, near ettringite and/or thaumasite were detected by X-ray diffraction analyses performed on ground concrete samples. Large gypsum crystals were mainly located at the interface between the cement paste and aggregates, as observed by scanning electron microscopy coupled to energy-dispersive spectroscopy microanalysis. The degradation effects increased with decreasing the distance of concrete structures from an absorbing well located in the courtyard of the building. The well was recognized as the sulfate source due to the microorganism metabolism of sulfur compounds present in the sewage. Consequences of this attack were a very poor bond strength between cement paste and aggregates and a severe cracking of the concrete cover of the steel reinforcement.     

Preparation and characterization of trilobal activated carbon fibers

The objective of this research was to evaluate the effectiveness of several different methods for controlling the pore size and pore size distribution in activated carbon fibers. Variables studied included fiber shape, activation time, and the addition of small amounts of silver nitrate. Pure isotropic pitch and the same isotropic pitch containing 1 wt.% silver were melt spun to form fibers with round and trilobal cross sections. These fibers were then stabilized, carbonized, and activated in carbon dioxide. Field emission scanning electron microscopy (FE SEM), electron dispersive spectra (EDS), and wavelength dispersive spectra (WDS) were used to monitor the size and distribution of the silver particles in the fibers before and after activation. Each of these analyses showed that the distribution of silver particles was extremely uniform before and after activation. The fibers were also weighed before and after activation to determine the percent burn-off. The BET specific surface areas of the activated fibers were determined from N₂ adsorption isotherms measured at −196 °C. The results showed that round and trilobal fibers with equivalent cross-sectional areas yielded similar burn-off values and specific surface areas after activation. Also, activation rates were found to be independent of CO₂ flow rate. The porosity of the activated fibers depended on the total time of activation and the cross-sectional area of fibers. The N₂ adsorption measurements showed that the activated fibers had extremely high specific surface areas (greater than 3000 m²/g) and high degrees of meso- and macro-porosity. FE SEM was also used to investigate surface texture and size of pore openings on the surfaces of the activated fibers. The photos showed that silver particles generated surface macro- and mesopores, in agreement with the inferences from N₂ adsorption measurements.     

Phytotoxic properties of cnicin,a sesquiterpene lactone fromcentaurea maculosa (spotted knapweed)

Water and solvent extracts from the aerial tissues ofCentaurea maculosa, spotted knapweed, inhibited the root growth of lettuce. Column chromatography and lettuce bioassay of a chloroform extract led to the isolation of cnicin, a sesquiterpene lactone. Pure cnicin was bioassayed at 0, 1, 2, 4, 6, 8, and 10 mg/5 ml water with lettuce, created wheatgrass, bluebunch wheatgrass, rough fescue, western larch, lodgepole pine, and spotted knapweed. Germination was inhibited at one or more concentrations for all species except lodgepole pine and spotted knapweed. Growth, particularly of the roots, was retarded between 1 and 4 mg of cnicin. Lettuce, bluebunch wheatgrass, and spotted knapweed were inhibited significantly at all concentrations tested.     

Solvent free liquid phase oxidation of benzyl alcohol using Au supported catalysts prepared using a sol immobilization technique

Solvent free oxidation of benzyl alcohol was investigated in the absence of a base using Au catalysts prepared by sol immobilization on titania and carbon supports. Comparison between the Au supported catalysts revealed that activity and distribution of products was dependent on the nature of support and heat treatment. Specifically, heat pre-treatment of the Au catalysts has a beneficial effect in terms of activity, but is detrimental in terms of selectivity to the benzaldehyde. We conclude that sol immobilization is a suitable technique for preparing gold catalysts with small particle size and narrow particle size distributions and very high activity and selectivity for benzyl alcohol oxidation.     

Lithium-deficient LiYMn2O4 spinels (0.9 ≤ Y < 1): Lithium content, synthesis temperature, thermal behaviour and electrochemical properties

Lithium-deficient Li_YMn₂O₄ spinels (LD-Li_YMn₂O₄) with nominal composition (0.9 ≤ Y < 1) have been synthesized by melt impregnation from Mn₂O₃ and LiNO₃ at temperatures ranging from 700 °C to 850 °C. X-ray diffraction data show that LD-Li_YMn₂O₄ spinels are obtained as single phases in the range Y = 0.975-1 at 700 °C and 750 °C. Morphological characterization by transmission electron microscopy shows that the particle size of LD-Li_YMn₂O₄ spinels increases on decreasing the Li-content. The influence of the Li-content and the synthesis temperature on the thermal and electrochemical behaviours has been systematically studied. Thermal analysis studies indicate that the temperature of the first thermal effect in the differential thermal analysis (DTA)/thermogravimetric (TG) curves, T_C1, linearly increases on decreasing the Li-content. The electrochemical properties of LD-Li_YMn₂O₄ spinels, determined by galvanostatic cycling, notably change with the synthesis conditions. So, the first discharge capacity, Q_disch., at C rate increases on rising the Li-content and the synthesis temperature. The sample Li_0.975Mn₂O₄ synthesized at 700 °C has a Q_disch. = 123 mAh g⁻¹ and a capacity retention of 99.77% per cycle. This LD-Li_YMn₂O₄ sample had the best electrochemical characteristics of the series.     

Evaluation of the antimicrobial action of honey against Staphylococcus aureus, Staphylococcus epidermidis, Pseudomonas aeruginosa, Escherichia coli, Salmonella enteritidis, Listeria monocytogenes and Aspergillus niger. Evaluation of its microbiological charge

The evaluation of the microbiological charge present in Costa Rican samples as the evaluation of its antimicrobial activity over different microorganisms, including those associated to wound infections, will allow to emit criteria referred to its use in therapeutic treatments, specially as alternative therapy for cases involving antibiotic resistant bacteria. The microbiological charge of 25 honey samples, acquired in Costa Rican markets was evaluated through several indicators including total plate aerobic count, total plate anaerobic count, total aerobic spore count, total anaerobic spore count and molds and yeast count. Also, samples were inoculated in tubes with chopped meat media and plated in egg yolk agar in order to determine the presence of Clostridium botulinum. For the antimicrobial activity evaluation, the diffusion method in Muller Hinton agar was performed, testing different honey concentrations (100, 75, 50, 25, 12,5 and 6,25 % v/v) against Staphylococcus aureus (ATCC 25923), Staphylococcus epidermidis (UCR 2902), Pseudomonas aeruginosa (ATCC 9027), Escherichia coli (ATCC25922), Salmonella enteritidis (ATCC 13076), Listeria monocytogenes (ATCC 19116) and Aspergillus niger. The results obtained for the microbiological characterization of honey show that 91% of samples had counts equal or lower than 1,0 x 10(1) CFU/g. No positive result was obtained for the isolation of C. botulinum. 24 of the samples analyzed inhibited the growth of S. aureus even in a 25% v/v concentration, nevertheless, A. niger was no inhibited by any of the samples tested.