HTP型X65管线钢的开发与生产

介绍了济钢在3200／3500mm双四辊轧机上首次大规模研制生产X65管线钢的工艺和性能。所研制的管线钢采用低C、S、P和高Nb、无V、Mo的成分设计，有低的碳当量CE（≤0．34）和PCN（≤0．17）。应用精轧机HTP和ACC快速冷却工艺获得针状铁素体组织，采用堆垛缓冷实现热扩散处理，获得优良性能。采用所开发的X65管线钢板制成的直缝埋弧焊钢管具有良好的力学性能和焊接性能。     

X-ray microfluorescence analysis of pigments in decorative paintings from the sarcophagus cartonnage of an Egyptian mummy

This work characterized the elemental composition of the pigments used in decorative paintings from the sarcophagus cartonnage fragments of an Egyptian mummy, using μXRF with Synchrotron Radiation. This female mummy (n.158) is considered one of the most important pieces of the National Museum (Rio de Janeiro, Brazil) because of its unconventional embalming with legs and arms swathed separately. The measurements were performed at the XRF beamline D09B of the Brazilian Synchrotron Light Laboratory (LNLS), using white beam and a Si(Li) detector with resolution of 165 eV at 5.9 keV. The elements found in the samples were: Si, S, Cl, K, Ca, Ti, Cr, Mn, Fe, Ni, Cu, Zn, As, Sr, Hg and Pb.     

连铸喷嘴特性测试与分析

通过测试连铸二冷喷嘴性能，对比同型号喷嘴使用前后两种状态下特性参数，分析了喷嘴参数变化的原因。提出了对使用中的喷嘴特性进行检测与校核的建议，以确保喷嘴特性满足铸坯二冷工艺条件，保证铸坯质量。     

Alpha induced reactions on Sn: An experimental study of excitation functions and possible production pathways

In the frame of a systematic study of light ion induced threshold reactions on natural tin (Sn) excitation functions for alpha particles induced reactions are presented in a 12–38 MeV energy domain. Using a stacked foil activation method the following radioisotopes were identified: ¹¹⁶Te, ¹¹⁷Te, ¹¹⁸Te, ¹¹⁹Te, ¹²¹Te, ¹²³Te, ¹¹⁷Sb, ¹¹⁸Sb, ¹²⁰Sb, ¹²²Sb, ¹²⁴Sb, ¹²⁶Sb, ¹¹⁷Sn, ¹¹¹In. The experimental cross sections for these isotopes are presented for the first time in this energy range and a direct comparison with values calculated with the ALICE-IPPE code is discussed. Possible use of these data for production of some isotopes relevant in nuclear medicine is suggested.     

An Approach to Modelling the Forming Process of Sheet Metal-Polymer Composites

Polymer Injection Forming (PIF) and Polymer Injection-Compression Forming (PICF) are new manufacturing technologies for sheet metal-polymer macro-composites, which result from the combination of injection moulding and sheet metal forming. In these processes, a metal blank is formed inside an injection mould by using the pressure of the molten polymer that, after cooling, permanently bonds to the metal sheet creating a fully finished product in only one production step. This paper presents a calibrated multi-physics numerical model of the processes that proves to be suitable to investigate the mutual metal-polymer interactions and to provide a reliable tool in designing the process as well as its control.     

4%Cr铸钢支承辊热处理工艺

以太钢1549轧机采用的4%Cr铸钢支承辊为依托,研究了该辊子从铸造成形到最终精加工之间的三次热处理工艺。最终达到其技术要求:辊身硬度65~70HS、淬硬层深≥70 mm、辊颈硬度42~48HS。     

灵江特大桥大直径水下钻孔灌注桩施工技术

灵江特大桥主墩钻孔灌注桩φ2.5m,桩长65￣99.5m,孔内漂石多,成孔因难,通过合理选用钻机和钻头,采用锯末屑止渗,等强度直螺纹连接法缩短钢筋笼井口安装时间,混凝土取样器控制灌注标高等措施,解决了成桩过程中的难题,效果显著。     

基于OpenGL和MFC的石油井管道的绘制

介绍了O penGL的知识和石油井的基本概念,利用O penGL实现石油井管道的绘制,包括石油井数据的变换和管道起始点的跟踪和角度的旋转。纹理光照效果增强图形生动性,交互操作改变图形视角。并且利用DAO数据库和L istv iew控件实现数据保存和修改。该程序能够完成石油井的管道绘制和数据保存。     

Modeling for local dynamic behaviors of phenol biodegradation in bubble columns

A coupled three-dimensional (3-D) model, combining hydrodynamics with biochemical reactions, was developed to simulate the local transient flow patterns and the dynamic behaviors of cell growth and phenol biodegradation by yeast Candida tropicalis in the bubble-column bioreactor, using the computational fluid dynamic (CFD) method. In order to validate this proposed model effectively, the validation of the local hydrodynamic characteristics of the gas-mineral salt solution (gas-liquid) two-phase system, with the phenol concentration of 1200 mg/L, and with the absence of cells, was performed in a square-sectioned bubble column bioreactor using the LDA system and conductivity probe. Furthermore, the validation of phenol biodegradation behaviors by yeast Candida tropicalis at different initial concentrations of phenol and cell was also carried out in the above bubble-column bioreactor. The results indicated that the model simulations had a satisfying agreement with the experimental data. Finally, the local instantaneous flow and phenol biodegradation features including gas holdup, gas velocity, liquid velocity, cell concentration and phenol concentration inside the bioreactor were successfully predicted in different-scale bubble columns by the proposed model. © 2006 American Institute of Chemical Engineers AIChE J, 2006     

Quantum Dots-Based Optical Fiber Temperature Sensors Fabricated by Layer-by-Layer

Two types of CdTe quantum dots of different sizes (4 and 5 nm) were successfully deposited on optical fibers using the layer-by-layer electrostatic self-assembly method. The sensors showed a linear and reversible variation of the emission wavelength for a temperature range from 30 degC to 100 degC, with a sensitivity of 0.2 nm/degC