Preparation and properties of novel polyurethane insulating coatings based on glycerin‐terminated urethane prepolymers and blocked isocyanate

Novel polyurethane insulating coatings were prepared from the reaction of glycerin‐terminated polyurethane prepolymers (GPUPs) and a blocked isocyanate curing agent (BIC). The GPUPs were prepared from the reaction of one equivalent of polycaprolactone polyol (CAPA 210) with an excess amount of 4,4′‐methylene bis(phenyl isocyanate) (MDI) and subsequent reaction of the NCO‐terminated polyurethane with glycerin. The BIC was prepared from the reaction of trimethylol propane (TMP), toluene diisocyanate (TDI) and N‐methylaniline (NMA). The polyols and curing agent were characterized by conventional methods while the curing condition was optimized via gel content measurements. The curing kinetics of the polyurethane coating were investigated and the kinetic parameters derived. The crosslink densities of the samples were determined via the equilibrium swelling method, using the Flory–Rehner equation. The relationships between the crosslink density and the electrical, physical, mechanical and dynamic mechanical properties of the coatings were also studied. Copyright © 2005 Society of Chemical Industry     

Rotation-invariant multiresolution texture analysis using radon and wavelet transforms.

A new rotation-invariant texture-analysis technique using Radon and wavelet transforms is proposed. This technique utilizes the Radon transform to convert the rotation to translation and then applies a translation-invariant wavelet transform to the result to extract texture features. A kappa-nearest neighbors classifier is employed to classify texture patterns. A method to find the optimal number of projections for the Radon transform is proposed. It is shown that the extracted features generate an efficient orthogonal feature space. It is also shown that the proposed features extract both of the local and directional information of the texture patterns. The proposed method is robust to additive white noise as a result of summing pixel values to generate projections in the Radon transform step. To test and evaluate the method, we employed several sets of textures along with different wavelet bases. Experimental results show the superiority of the proposed method and its robustness to additive white noise in comparison with some recent texture-analysis methods.     

An automated coding and classification system with supporting database for effective design of manufacturing systems

The philosophy of group technology (GT) is an important concept in the design of flexible manufacturing systems and manufacturing cells. Group technology is a manufacturing philosophy that identifies similar parts and groups them into families. Beside assigning unique codes to these parts, group technology developers intend to take advantage of part similarities during design and manufacturing processes. GT is not the answer to all manufacturing problems, but it is a good management technique with which to standardize efforts and eliminate duplication. Group technology classifies parts by assigning them to different families based on their similarities in: (1) design attributes (physical shape and size), and/or (2) manufacturing attributes (processing sequence). The manufacturing industry today is process focused; departments and sub units are no longer independent but are interdependent. If the product development process is to be optimized, engineering and manufacturing cannot remain independent any more: they must be coordinated. Each sub-system is a critical component within an integrated manufacturing framework. The coding and classification system is the basis of CAPP and the functioning and reliability of CAPP depends on the robustness of the coding system. The proposed coding system is considered superior to the previously proposed coding systems, in that it has the capability to migrate into multiple manufacturing environments. This article presents the design of a coding and classification system and the supporting database for manufacturing processes based on both design and manufacturing attributes of parts. An interface with the spreadsheet will calculate the machine operation costs for various processes. This menu-driven interactive package is implemented using dBASE-IV. Part Family formation is achieved using a KAMCELL package developed in TURBO Pascal.     

Influence of joint detail on the flexural/torsional interaction of thin-walled structures

For a structure formed from two thin-walled open members connected at 90°, torsion applied to one member can result in torsion as well as flexure in the second member, with the magnitude and direction of this torsion as well as flexure in the second member being determined by the type of joint used. Conventional structural analysis would normally assume the presence of only flexure in the second member. The results from a finite element study of structures formed from thin-walled channel sections connected by box, mitre and stiffened mitre joints is presented and an explanation for the behaviour of the different joint types is given. It is shown that for the box joint the warping deformation of the loaded member is the dominant factor in determining the magnitude and direction of the twisting of the second member, whilst this is determined for the stiffened mitre joint primarily by the St Venant rotation deformation of the loaded member. For the unstiffened joint it is shown that the warping and St Venant rotation deformation effects tend to cancel each other out.     

Variation in phosphoric acid concentration and treatment time and HEMA diffusion through dentin

IGF-1 and its receptors have been identified in many tissues including the central nervous system (CNS). We have previously demonstrated that injection of insulin directly into the cerebral ventricles (ICV) is followed by a drop in mean arterial pressure (MAP) associated with an increase in skeletal muscle blood flow. Given the similarities between the IGF-1 and insulin molecules and their respective receptors, we have investigated the effect of ICV administration of IGF-1 on systemic blood pressure and blood flow in selected vascular beds. ICV cannulas were implanted into normal rats and the animals were allowed to recover for 3 to 4 days. The femoral artery and vein were cannulated for blood pressure monitoring and blood sampling and blood flow probes placed around the iliac, the renal and the superior mesenteric artery were used to assess regional blood flow. ICV injection of IGF-1 resulted in a significant decrease in MAP with a nadir at 15 minutes and a gradual return to baseline by 60 minutes; heart rate increased 40 minutes after the injection. IGF-1 significantly enhanced vascular flow and conductance in the iliac, but not in the renal and superior mesenteric arteries. The effects of IGF-1 were much smaller than those observed previously with equimolar amounts of insulin. We conclude that IGF-1 can decrease MAP by selectively increasing blood flow to skeletal muscle through a direct action on the central nervous system.     

Evaluation and enhancement of COBRA-TF efficiency for LWR calculations

Detailed representations of the reactor core generate computational meshes with a high number of cells where the fluid dynamics equations must be solved. An exhaustive analysis of the CPU times needed by the thermal-hydraulic subchannel code COBRA-TF for different stages in the solution process has revealed that the solution of the linear system of pressure equations is the most time consuming process. To improve code efficiency two optimized matrix solvers, Super LU library and Krylov non-stationary iterative methods have been implemented in the code and their performance has been tested using a suite of five test cases. The results of performed comparative analyses have demonstrated that for large cases, the implementation of the Bi-Conjugate Gradient Stabilized (Bi-CGSTAB) Krylov method combined with the incomplete LU factorization with dual truncation strategy (ILUT) pre-conditioner reduced the time used by the code for the solution of the pressure matrix by a factor of 20. Both new solvers converge smoothly regardless of the nature of simulated cases and the mesh structures and improve the stability and accuracy of results compared to the classic Gauss–Seidel iterative method. The obtained results indicate that the direct inversion method is the best option for small cases.     

Application of outranking methods to economic and financial justificaton of CIM systems

Traditional economic evaluation methods concentrate on maximizing or minimizing a single objective such as net present value and pay back period. In the last decade, there has been an increased awareness of the need to consider multiple attributes in the evaluation of advanced manufacturing systems. Various methods have recently been developed for the evaluation of CIM systems. This paper discusses multiattribute methods for justification of CIM systems and outranking methods including ELECTRE, ORESTE, and PROMETHEE.     

Application of a Three-dimensional Wind Driven Circulation Model to Assess the Locations of New Drinking Water Intakes in Lake Ontario

A 3D transport model is used to perform a comparative analysis of several potential drinking water intakes located along the northwest shore of Lake Ontario between Toronto and Oshawa. The model is specifically used to assess each intake under both long- and short-term transport of a potential pollutant release from the Pickering Nuclear Generating Station and potential and actual pollutant releases from local land sources respectively. A model based on a 500 m grid resolution is calibrated using data collected in the aftermath of the 1992 tritium spill at the Pickering Nuclear Generation Station and subsequently used to simulate long-term transport. A model based on a 100 m grid resolution is verified using drogue studies and used to simulate short-term transport events. Both models are used to assess pollutant levels at each of nine potential intake locations under different wind scenarios and pollutant releases. Field data for the study included water quality and flow measurements from local sewers and rivers, and estimates of pollutant levels from the local waste water treatment plants. This paper describes the model setup for both the long-term and short-term transport models, calibration using field data, long-term transport modeling, short-term transport modeling, and the comprehensive analysis approach used to evaluate the nine potential intake locations proposed. Results indicated that four intakes in particular outperformed other intake locations by maintaining bottom pollutant levels within governmental standards and warning times that exceeded 20 hours.     

Nicotinic cholinergic system involvement in eyeblink classical conditioning in rabbits.

A nicotinic cholinergic antagonist, mecamylamine (MEC), was administered to rabbits tested on eyeblink classical conditioning (EBCC) in the 750-msec delay paradigm for 10 90-trial sessions. Nicotinic receptors were measured in 3 brain regions in S treatment groups: paired conditioned stimulus–unconditioned stimulus (CS–UCS) presentations with (1) vehicle, young; (2) vehicle, older; (3) 0.5 mg/kg MEC, young; unpaired CS–UCS with (4) 0.5 mg/kg MEC, young; and (5) vehicle, young. Daily MEC injections disrupted acquisition in young rabbits (769 trials to learning criterion vs 323 trials for vehicle-treated young rabbits). MEC-treated young rabbits learned similarly to older rabbits. Brain nicotinic receptors were not affected by 10 daily MEC injections. To our knowledge, this experimental protocol, using a low MEC dose to selectively inhibit nicotinic cholinergic receptors, is the first to demonstrate a role for nicotinic cholinergic receptors in EBCC. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The relationship between the extent of reciprocity with social supporters and measures of depressive symptomatology, impairment, disability, and handicap in persons with spinal cord injury.

140 adults (aged 19–77 yrs) were randomly selected from a sampling frame of 661 persons with spinal cord injury. They completed a questionnaire assessing amount of social support, degree of reciprocity with supporters, and satisfaction with relationships with supporters; the Center for Epidemiologic Studies Depression Scale; a self-report version of the Functional Independence Measure; and the Craig Handicap Assessment and Reporting Technique. A physician assessed the degree of paralytic impairment by means of the ASIA Total Motor Index Score. Relationships in which the supporter gave more than the participant were associated with more satisfaction with the relationship and more social support. The number of reciprocal relationships was positively associated with more desirable outcomes in the handicap dimensions of mobility, occupation, social integration, and economic self-sufficiency. (PsycINFO Database Record (c) 2010 APA, all rights reserved)