Intercomparison of infrared cavity leak-out spectroscopy and gas chromatography-flame ionization for trace analysis of ethane

Comparison of two different methods for the measurement of ethane at the parts-per-billion (ppb) level is reported. We used cavity leak-out spectroscopy (CALOS) in the 3 microm wavelength region and gas chromatography-flame ionization detection (GC-FID) for the analysis of various gas samples containing ethane fractions in synthetic air. Intraday and interday reproducibilities were studied. Intercomparing the results of two series involving seven samples with ethane mixing ratios ranging from 0.5 to 100 ppb, we found a reasonable agreement between both methods. The scatter plot of GC-FID data versus CALOS data yields a linear regression slope of 1.07 +/- 0.03. Furthermore, some of the ethane mixtures were checked over the course of 1 year, which proved the long-term stability of the ethane mixing ratio. We conclude that CALOS shows equivalent ethane analysis precision compared to GC-FID, with the significant advantage of a much higher time resolution (<1 s) since there is no requirement for sample preconcentration. This opens new analytical possibilities, e.g., for real-time monitoring of ethane traces in exhaled human breath.     

Determination of Thermal and Mechanical Material Properties of Ultra‐High Strength Steels for Hot Stamping

Direct and indirect hot stamping presently constitutes one of the most innovative forming technologies in the automotive industry through the combination of forming and hardening in one process step or line. Thus, structural components with strength up to 1600 MPa can be accomplished with the quench hardenable ultra‐high strength steel 22MnB5. With respect to the numerical investigation of the feasibility of different parts the knowledge of various thermal and mechanical material characteristics determined under process relevant conditions are required. Within the scope of this paper different experimental methods will be introduced for the determination of material properties according to the typical time‐temperature characteristics of the hot stamping process, as well as the modelling of it as input data for the FE analysis.     

FEM-Based determination of real and complex elastic, dielectric, and piezoelectric moduli in piezoceramic materials

We propose an enhanced iterative scheme for the precise reconstruction of piezoelectric material parameters from electric impedance and mechanical displacement measurements. It is based on finite-element simulations of the full three-dimensional piezoelectric equations, combined with an inexact Newton or nonlinear Landweber iterative inversion scheme.We apply our method to two piezoelectric materials and test its performance. For the first material, the manufacturer provides a full data set; for the second one, no material data set is available. For both cases, our inverse scheme, using electric impedance measurements as input data, performs well.     

A robust protein host for anchoring chelating ligands and organocatalysts

In order to put the previously proposed concept of directed evolution of hybrid catalysts (proteins that harbor synthetic transition-metal catalysts or organocatalysts) into practice, several prerequisites must be met. The availability of a robust host protein that can be expressed in sufficiently large amounts, and that can be purified in a simple manner is crucial. The thermostable enzyme tHisF from Thermotoga maritima, which constitutes the synthase subunit of a bi-enzyme complex that is instrumental in the biosynthesis of histidine, fulfills these requirements. In the present study, fermentation has been miniaturized and parallelized, as has purification of the protein by simple heat treatment. Several mutants with strategically placed cysteines for subsequent bioconjugation have been produced. One of the tHisF mutants, Cys9Ala/Asp11Cys, was subjected to bioconjugation by the introduction of a variety of ligands for potential metal ligation, of a ligand/metal moiety, and of several organocatalytic entities that comprise a flavin or thiazolium salts. Characterization by mass spectrometry and tryptic digestion was achieved. As a result of this study, a platform for performing future directed evolution of these hybrid catalysts is now available.     

Light-driven biocatalytic oxidation and reduction reactions: scope and limitations

The quest for practical regeneration concepts for nicotinamide-dependent oxidoreductases continues. Recently we proposed the use of visible light to promote the direct reductive regeneration of a flavin-dependent monooxygenase. With this enzyme (PAMO-P3) light-driven enantioselective Baeyer-Villiger oxidations were performed. In spite of the significant reduction in the complexity achieved, catalytic performance of the novel approach did not meet the requirements for an efficient biocatalytic oxygenation system. Driven by this ultimate goal, we further investigated the limiting factors of our particular system. We discovered that oxidative uncoupling of the flavin-regeneration reaction from enzymatic O2-activation accounts for the futile consumption of approximately 95% of the reducing equivalents provided by the sacrificial electron donor, EDTA. Furthermore, it was found that the apparent turnover frequency (TOF) for PAMO-P3 in the present setup is approximately two orders of magnitude lower than in conventional setups that use NADPH as reductant. This finding was traced to sluggish electron transfer kinetics that arose from an impeded interaction between PAMO-P3-bound FAD and the reducing catalyst. The limiting factors and potential approaches for their circumvention are discussed. Furthermore, we broadened the light-driven regeneration approach to the class of flavin-dependent reductases. By using the Old Yellow Enzyme homologue YqjM as a model system, a significantly higher catalytic turnover for the enzyme catalyst was achieved, which we assign to a higher accessibility of the prosthetic group as well as to the absence of oxidative uncoupling.     

Intersubband decay of 1-D exciton resonances in carbon nanotubes

We have studied intersubband decay of E22 excitons in semiconducting carbon nanotubes experimentally and theoretically. Photoluminescence excitation line widths of semiconducting nanotubes with chiral indicess (n,m) can be mapped onto a connectivity grid with curves of constant (n - m) and (2n + m). Moreover, the global behavior of E22 line widths is best characterized by a strong increase with energy irrespective of their (n-m)mod(3) = +/-1 family affiliation. Solution of the Bethe-Salpeter equations shows that the E22 line widths are dominated by phonon assisted coupling to higher momentum states of the E11 and E12 exciton bands. The calculations also suggest that the branching ratio for decay into exciton bands vs free carrier bands, respectively is about 10:1.     

Supramolecular discrimination of carbon nanotubes according to their helicity

Adsorption of specifically designed and geometrically constrained polyaromatic amphiphiles on single-walled carbon nanotubes (SWNTs) was found to be selective of the nanotube helicity angle. Starting from the same SWNT mixture, photoluminescence and resonant Raman spectroscopies show that a pentacenic-based amphiphile leads to the solubilization of armchair SWNTs and that a quaterrylene-based amphiphile leads to the solubilization of zigzag SWNTs. The results were predicted by the design of the two amphiphiles and are consistent with a supramolecular recognition of the nanotube graphene-type atomic structure by the aromatic part of the molecules through optimized pi-pi-stacking interactions.     

Extended arrays of vertically aligned sub-10 nm diameter [100] Si nanowires by metal-assisted chemical etching

Large-area high density silicon nanowire (SiNW) arrays were fabricated by metal-assisted chemical etching of silicon, utilizing anodic aluminum oxide (AAO) as a patterning mask of a thin metallic film on a Si (100) substrate. Both the diameter of the pores in the AAO mask and the thickness of the metal film affected the diameter of SiNWs. The diameter of the SiNWs decreased with an increase of thickness of the metal film. Large-area SiNWs with average diameters of 20 nm down to 8 nm and wire densities as high as 10 (10) wires/cm (2) were accomplished. These SiNWs were single crystalline and vertically aligned to the (100) substrate. It was revealed by transmission electron microscopy that the SiNWs were of high crystalline quality and showed a smooth surface.