Modern Template Design and Biological Evaluation of Cephradine-loaded Magnesium Calcium Silicate Nanocomposites as an Inhibitor for Nosocomial Bacteria in Biomedical Applications

Silicon - Magnesium calcium silicate nanostructures (MCSNS) loaded with (0.0, 0.6, 0.9, and 1.2 wt%) of Cephradine-drug consisting of mesoporous particles were functionally prepared by sol-gel...     

X-ray Fluorescence Uptake Measurement of Functionalized Gold Nanoparticles in Tumor Cell Microsamples

Quantitative cellular in vitro nanoparticle uptake measurements are possible with a large number of different techniques, however, all have their respective restrictions. Here, we demonstrate the application of synchrotron-based X-ray fluorescence imaging (XFI) on prostate tumor cells, which have internalized differently functionalized gold nanoparticles. Total nanoparticle uptake on the order of a few hundred picograms could be conveniently observed with microsamples consisting of only a few hundreds of cells. A comparison with mass spectroscopy quantification is provided, experimental results are both supported and sensitivity limits of this XFI approach extrapolated by Monte-Carlo simulations, yielding a minimum detectable nanoparticle mass of just 5 pg. This study demonstrates the high sensitivity level of XFI, allowing non-destructive uptake measurements with very small microsamples within just seconds of irradiation time.     

Preparation,Properties and Applications of the Hybrid Organic/Inorganic Nanocomposite Based on Nanoporous Carbon Matrix

Journal of Inorganic and Organometallic Polymers and Materials - Nanoporous carbon matrix was prepared by the sol–gel process from pyrogallol-formaldehyde (PF) mixtures in water using picric...     

Influence of current density on oxygen transfer in an electroflotation cell

The objective of this work is to study the transfer of oxygen from gas to liquid phase in an electroflotation cell. The measurements were performed in a laboratory scale cell using insoluble electrodes, titanium coated with ruthenium oxide as anode and stainless steel as cathode. The volumetric mass transfer coefficient K _L a, was characterized for clean tap water as liquid phase for different values of current density (J). The global coefficient of mass transfer based on the liquid film, K _L , and the specific interfacial area, a, were characterized. A model which relates K _L a to current density was established. Different evaluation criteria of oxygen transfer in electroflotation process were determined and compared with other aeration process.     

Glass transition and the rigid amorphous phase in semicrystalline blends of bacterial polyhydroxybutyrate PHB with low molecular mass atactic R, S-PHB-diol

The glass transition and the crystallinity of blends of isotactic bacterial PHB and low molecular mass atactic R, S-PHB-diols was investigated by means of differential scanning calorimetry (DSC), temperature-modulated DSC and dielectric spectroscopy. It was found that (i) T_g of crystallized blends is much lower than T_g of quenched blends, (ii) the semi-crystalline blends can only be described with a three-phase model. From the experimental results the amount of the oligomer component in the mobile amorphous as well as in the rigid amorphous phase was determined. It could be shown that the low molecular mass atactic R, S-PHB-diol is enriched in the mobile amorphous phase of the semi-crystalline blends, but 5-15% oligomer remains, however, in the rigid amorphous phase.     

Repeated Budgeted Second Price Ad Auction

Our main goal is to abstract existing repeated sponsored search ad auction mechanisms which incorporate budgets, and study their equilibrium and dynamics. Our abstraction has multiple agents bidding repeatedly for multiple identical items (such as impressions in an ad auction). The agents are budget limited and have a value per item. We abstract this repeated interaction as a one-shot game, which we call budget auction, where agents submit a bid and a budget, and then items are sold by a sequential second price auction. Once an agent exhausts its budget it does not participate in the proceeding auctions. Our main result shows that if agents bid conservatively (never bid above their value) then there always exists a pure Nash equilibrium. We also study simple dynamics of repeated budget auctions, showing their convergence to a Nash equilibrium for two agents and for multiple agents with identical budgets.     

Evaluation of Polyester Resin as a New Compatibilizer for SBR/PVC Blends

A polyester (PE) based on the glycolyzed products of PET was prepared and added in different concentrations to a series of SBR/PVC blends. The addition of the polyester showed that all properties of SBR/PVC blends were improved by incorporation of PE. Highest mechanical strength values were obtained at a polyester concentration of 7.5 phr. Thermal analysis as well as dynamic mechanical properties of SBR/PVC blends after the addition of 7.5 and 10 phr polyester indicated one single glass transition temperature. The dielectric losses (?") were analyzed in the frequency domains in the two terms of Fröhlich related to the Maxwell Wagner effect and the orientation of the aggregates caused by the movement of the main chain. The permittivity (?') values were found to increase by increasing the polyester content. This increase was followed by a decrease in the ?" up to a 7.5 phr polyester content after which no pronounced change was noticed.     

A significant improvement of both yield and purity during SWCNT synthesis via the electric arc process

This paper deals with the optimisation of the single walled carbon nanotube (SWCNT) synthesis by the electric arc technique using so-called heterogeneous anodes filled with Ni and Y catalysts along with either graphite (large-grain or small-grain) or diamond powders. The various carbon nanophases produced were analyzed using high-resolution transmission electron microscopy. Plasma physical properties were determined by emission spectroscopy and were correlated to the variation in the carbon products formed. Using large-grain (100 μm) graphite powder corresponded to standard conditions since able to generate impurity-rich SWCNT material resembling that usually described in literature. However, replacing the large-grain graphite powder by small-grain graphite powder (∼1 μm) resulted in a dramatic increase in both the yield and purity of the SWCNTs obtained. On the other hand, a similar result was obtained by using diamond powder (grain size ∼1 μm) instead of the small-grain graphite powder. The results are explained via the erosion modes of the anodes with respect to the apparent density of the powder mixtures filling their cavities. Maintaining a steady plasma composition and a CI/NiI concentration ratio higher than 10⁸ are identified as two conditions required for optimising SWCNT synthesis.     

Hierarchical inversion‐based output tracking control for uncertain autonomous underwater vehicles using extended Kalman filter

In this study, a hierarchical inversion‐based output tracking controller (HIOTC) is developed for an autonomous underwater vehicle (AUV) subject to random uncertainties (e.g., current disturbances, unmodeled dynamics, and parameter variations) and noises (e.g., process and measurement noises). The proposed HIOTC respectively utilizes a combination of feedforward and feedback controls in a hierarchical structure based on the kinematic and dynamic models of the system. Moreover, to obtain uncontaminated or unavailable states for implementing the proposed control law, the extended Kalman filter (EKF) is employed to estimate the system states. Then, the position outputs, orientation, and velocity of the AUV are reached with guaranteed asymptotic stability. The robustness of the proposed HIOTC is verified through injection of random uncertainties into the system model. The closed‐loop stability of the proposed individual subsystems is respectively guaranteed to have uniformly ultimately bounded (UUB) performance based on the Lyapunov stability criteria. In addition, the asymptotic tracking of the overall system is demonstrated using Barbalat's lemma. Finally, the feasibility and effectiveness of the proposed control scheme are evaluated through computer simulations and it is shown that the overall system achieves good asymptotic tracking performance.     

Response surface single loop reliability-based design optimization with higher-order reliability assessment

Reliability-based design optimization (RBDO) aims at determination of the optimal design in the presence of uncertainty. The available Single-Loop approaches for RBDO are based on the First-Order Reliability Method (FORM) for the computation of the probability of failure, along with different approximations in order to avoid the expensive inner loop aiming at finding the Most Probable Point (MPP). However, the use of FORM in RBDO may not lead to sufficient accuracy depending on the degree of nonlinearity of the limit-state function. This is demonstrated for an extensively studied reliability-based design for vehicle crashworthiness problem solved in this paper, where all RBDO methods based on FORM strongly violates the probabilistic constraints. The Response Surface Single Loop (RSSL) method for RBDO is proposed based on the higher order probability computation for quadratic models previously presented by the authors. The RSSL-method bypasses the concept of an MPP and has high accuracy and efficiency. The method can solve problems with both constant and varying standard deviation of design variables and is particularly well suited for typical industrial applications where general quadratic response surface models can be used. If the quadratic response surface models of the deterministic constraints are valid in the whole region of interest, the method becomes a true single loop method with accuracy higher than traditional SORM. In other cases, quadratic response surface models are fitted to the deterministic constraints around the deterministic solution and the RBDO problem is solved using the proposed single loop method.