Supramolecular morphology of two-step melt-spun poly(dioxanone) fibers

Structure of poly(dioxanone) (PPDX) fibers produced through a two-step melt-spinning process with an additional short-period annealing above the melting temperature of PPDX was investigated and the effect of annealing on the degradation behavior was discussed. The morphological study carried out by etching the fibers using a phosphate or permanganate solution suggested that the fibers take a skin–core structure, and both the skin layer and the core region consist of a bundle of microfibrils. The micro-beam X-ray diffraction analysis revealed that the short-period annealing in the production process only slightly promotes the crystallization in the skin layer but contributes to increasing the packing of amorphous chains near the skin, which seems to be the controlling factor of the hydrolytic degradation behavior of the fibers.     

Detection of Buckminsterfullerene in Usual Soots and Commercial Charcoals

Abstract

It was confirmed that soot produced by free burning of small hydrocarbons like benzene and cyclohexane generally contains less than 0.1 ppm of C₆₀. Small, but measurable amounts of C₆₀ were found in two samples of charcoal, providing the first indication of fullerene formation in the solid state.     

Operation Assist by Vibration Suppression Control Using Impulse‐Shaped Signals for Power Assist Conveyance System

This paper presents an assist control method for a flexible parts conveyance task using a power assist conveyance system. The assist control method should be designed so as not only to suppress vibration but also to reduce the degradation of operating feel. For this purpose, multiple impulse‐shaped signals are used as feedforward signals in order to reduce the vibration of flexible parts during conveyance. In addition, the adjustment time is introduced to adjust the input timing of the impulse‐shaped signal and to suppress vibration. In order to improve the degradation of operating feel, the smaller amplitudes of the three impulse‐shaped signals are used and input repeatedly. The effectiveness of the proposed system was verified experimentally. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(2): 31–39, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22476     

Hydrogen and carbon dioxide adsorption with tetra‐n‐butyl ammonium semi‐clathrate hydrates for gas separations

Gas adsorption rates of H₂, CO₂, and H₂‐CO₂ gas mixture (H₂/CO₂ = 3.4) with tetra‐n‐butyl ammonium salt (bromide, chloride, and fluoride) semi‐clathrate hydrate particles were measured at 269 K to assess their properties for gas separation. Equilibrium gas occupancies in the S‐cages of the particles were in order of (high to low) for hexagonal structure‐I, tetragonal structure‐I, and superlattice of cubic structure‐I structures with the maximum fractional occupancy by CO₂ being about 40%. The CO₂ diffusion rate depended on the anion size of the salt, which is attributed to distortion of the S‐cage that is close to the molecular size of CO₂. Simulations of semi‐clathrate hydrate particles with theory showed that H₂/CO₂ selectivities could be as high as 36 (3.0 mol% TBAF) and that selectivities for an ideal membrane (3.3 mol% TBAF) could be >100 (269 K, 0.3–4.5 MPa). Semi‐clathrate hydrates have wide application as separation media for gas mixtures. © 2014 American Institute of Chemical Engineers AIChE J, 61: 992–1003, 2015     

Effects of Atmospheric Composition on the Molecular Structure of Synthesized Silicon Oxycarbides

The dependence of silicon oxycarbides' chemical composition and molecular structure on their reaction conditions was tested by varying the atmosphere under which pyrolysis was performed. To obtain the silicon oxycarbides, densely cross‐linked silicone resin particles with an averaged diameter of 2 μm were pyrolyzed in various atmospheres of H₂, Ar, and CO₂, in the temperature range 700°C–1100°C. The residual mass of resin after pyrolysis was almost constant at 700°C, although their apparent colors varied distinctly. The sample obtained from the H₂ atmosphere was white, whereas that obtained from the CO₂ atmosphere was dark brown. Fourier‐transform infrared (FT‐IR) spectra of the residues suggested that the Si–O–Si network evolution was accelerated in the CO₂ atmosphere. Beyond 800°C, the chemical compositions of the compounds obtained from a H₂ atmosphere increasingly approached near‐stoichiometric SiO₂–xSiC composition with increasing the pyrolysis temperature. Compounds from a CO₂ atmosphere approached a composition of SiO₂–xC with no free SiC as the pyrolysis temperature increased. In the products from an Ar atmosphere, SiO₂–xSiC–yC compositions were typically obtained. The observed effects of the pyrolysis atmosphere on the resulting chemical compositions were analyzed in terms of thermodynamic calculations. Electron spin resonance (ESR) spectra revealed broad and intense signals from products obtained from either Ar or CO₂. Estimating from the signal intensity, the residual spin concentrations were in the range 10¹⁸–10¹⁹ g^?1. Meanwhile, the spectra from the samples obtained in H₂ showed weak and sharp signals with estimated spin concentrations ranging from 10¹⁶–10¹⁷ g^?1. This signal attenuation may have been due to the hydrogen capping of dangling bond formed during pyrolysis.     

High tensile strength fiber of poly[(R)‐3‐hydroxybutyrate‐co‐(R)‐3‐hydroxyhexanoate] processed by two‐step drawing with intermediate annealing

High tensile strength fibers of poly[(R)‐3‐hydroxybutyrate‐co‐(R)‐3‐hydroxyhexanoate] [P(3HB‐co‐3HH)], a type of microbial polyesters, were processed by one‐step and two‐step cold‐drawn method with intermediate annealing. Thermal degradation behaviors were characterized by differential scanning calorimeter and gel permeation chromatography measurements. Thermal analyses were revealed that molecular weights decreased drastically within melting time at a few minute. One‐step cold‐drawn fiber with drawing ratio of 10 showed tensile strength of 281 MPa, while tensile strength of as‐spun fiber was 78 MPa. When two‐step drawing was applied for P(3HB‐co‐3HH) fibers, the tensile strength was led to 420 MPa. Furthermore, the optimization of intermediate annealing condition leads to enhance the tensile strength at 552 MPa of P(3HB‐co‐3HH) fiber. Wide‐angel X‐ray diffraction measurements of these fibers suggest that the fibers with high tensile strength include much amount of the planer‐zigzag conformation (β‐form) as molecular conformation together with 2₁ helix conformation (α‐form). © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41258.