Investigation on thermal radiation spectra of coal ash deposits

This paper deals with thermal radiation properties of ash deposits on a pulverized coal boiler of an electric power plant. Normal emittance spectra in the 2.5–25 μm interval, and total normal emittance, were measured on 4 kinds of ash layers of a mm magnitude order thickness, at 560 → 1460 → 560 K in heating and cooling. It was found that ash powder layers are opaque for infrared radiation. The emittance increases with ash radiation wavelength and temperature. Ash powder is sintered and fused above 1200 K. The emittance of the sintered layer is above that of the unsintered layer. The authors propose, and explain by an example, correlating the experimentally obtained emittance spectra of ash deposits with a continuous curve, the formula of which defines the dependence of emittance on wavelength and temperature, i.e. ε = ε(λ,Т). Use of this formula, with parameter values determined by the proposed methodology, may greatly simplify the practical application of the experimentally determined emittances in the thermal design of existing and new steam boiler furnaces.     

Effect of substrate roughness on the contact damage of thin brittle films on brittle substrates

The effect of substrate and surface roughness on the contact fracture of diamond-like carbon coatings on brittle soda-lime glass substrates has been investigated. The average surface roughness (R_a) of the examined samples ranged from 15 nm to 571 nm. Contact damage was simulated by means of spherical nanoindentation, and fracture was subsequently assessed by focused ion beam microscopy. It was found that, in the absence of sub-surface damage in the substrate, fracture occurs in the coating in the form of radial, and ring/cone cracks during loading, and lateral cracks during unloading. Increasing the surface roughness results in a decrease in the critical load for crack initiation during loading, and in the suppression of fracture modes during unloading from high loads. When sub-surface damage (lateral cracks) is present in the substrate, severe spalling takes place during loading, causing a large discontinuity in the load-displacement curve. The results have implications concerning the design of damage-tolerant coated systems consisting of a brittle film on a brittle substrate.     

剃齿工艺的现状及其与磨齿工艺的比较

分析了磨齿加工与剃齿加工各自的优势,比较了两种齿轮加工工艺的难度和成本;介绍了新一代的剃齿刀重磨机床的特点、剃齿的效果以及特殊的剃齿方法。     

Mapping the impact of papers on various status groups in excellencemapping.net: a new release of the excellence mapping tool based on citation and reader scores

Scientometrics - In over five years, Bornmann, Stefaner, de Moya Anegon, and Mutz (2014b) and Bornmann, Stefaner, de Moya Anegón, and Mutz (2014c, 2015) have published several releases of the...     

Mechanical reliability of Ce0.8Gd0.2O2−δ-FeCo2O4 dual phase membranes synthesized by one-step solid-state reaction

Ce_0.8Gd_0.2O_2−δ-FeCo₂O₄ composites are attractive candidate materials for high-purity oxygen generation providing robust chemical stability. Aiming for future industrial applications, a feasible solid-state reaction process with one thermal processing step was used to synthesize 50 wt% Ce_0.8Gd_0.2O_2−δ:50 wt% FeCo₂O₄ and 85 wt% Ce_0.8Gd_0.2O_2−δ:15 wt% FeCo₂O₄ composites. Mechanical reliabilities of the sintered membranes were assessed based on the characterized mechanical properties and subcritical crack growth behavior. In general, the fracture strengths of as-sintered membranes were reduced by tensile residual stresses and microcracks. In particular, the enhanced subcritical crack growth behavior, which leads to limited stress tolerance and high failure probability after a 10-year operation, was evaluated in more detail. Further materials and processing improvements are needed to eliminate the tensile stress and microcracks to warrant a long-term reliable operation of the composites.     

A novel canonic,bipolynomial analogue filter configuration with a minimum number of common-ground capacitors

We proposed a novel canonic, multiple-loop feedback, bipolynomial analogue filter configuration with a minimum number of common-ground capacitors which contains same-type active functional blocks. A detailed analysis of sensitivity criterion minimization is given and a comparison is made with other filter configurations.     

Pre-processing of data coming from a laser-EMAT system for non-destructive testing of steel slabs

Non destructive test systems are increasingly applied in the industrial context for their strong potentialities in improving and standardizing quality control. Especially in the intermediate manufacturing stages, early detection of defects on semi-finished products allow their direction towards later production processes according to their quality, with consequent considerable savings in time, energy, materials and work. However, the raw data coming from non destructive test systems are not always immediately suitable for sophisticated defect detection algorithms, due to noise and disturbances which are unavoidable, especially in harsh operating conditions, such as the ones which are typical of the steelmaking cycle. The paper describes some pre-processing operations which are required in order to exploit the data coming from a non destructive test system. Such a system is based on the joint exploitation of Laser and Electro-Magnetic Acoustic Transducer technologies and is applied to the detection of surface and sub-surface cracks in cold and hot steel slabs.     

WoLMIS: a labor market intelligence system for classifying web job vacancies

In the last decades, an increasing number of employers and job seekers have been relying on Web resources to get in touch and to find a job. If appropriately retrieved and analyzed, the huge number of job vacancies available today on on-line job portals can provide detailed and valuable information about the Web Labor Market dynamics and trends. In particular, this information can be useful to all actors, public and private, who play a role in the European Labor Market. This paper presents WoLMIS, a system aimed at collecting and automatically classifying multilingual Web job vacancies with respect to a standard taxonomy of occupations. The proposed system has been developed for the Cedefop European agency, which supports the development of European Vocational Education and Training (VET) policies and contributes to their implementation. In particular, WoLMIS allows analysts and Labor Market specialists to make sense of Labor Market dynamics and trends of several countries in Europe, by overcoming linguistic boundaries across national borders. A detailed experimental evaluation analysis is also provided for a set of about 2 million job vacancies, collected from a set of UK and Irish Web job sites from June to September 2015.