Effect of thermal treatment on ZnO substrate for epitaxial growth

ZnO is a highly efficient photon emitter, and has optical and piezoelectric properties that are attractive for a variety of applications in sensors and potentially optoelectronic devices such as emitters. Due to its identical stacking order and close lattice match to GaN, it is also being developed as a substrate material for GaN epitaxy. However, the surface finish of the ZnO is such that much of the damage induced by sawing and follow up mechanical polishing remains. We developed a thermal treatment method to eliminate surface damage on the 0 face of ZnO (0 0 0 1) to prepare it for epitaxial growth. Atomic force microscopy images of ZnO (0 0 0 1) annealed at 1050 °C for 3 h etc. show that residual scratches from mechanical polishing are removed and atomically flat, terrace-like surfaces are attained. In addition, low-temperature photoluminescence and high-resolution X-ray diffraction measurements have been employed to investigate the effect of annealing on ZnO substrates.     

Analytical modeling of imperfect bond between coated fibers and matrix material

The present study is intended to find the stress intensity factors (SIF) and strain energy release rates (SERR) at the tips of an interface crack in a non-homogeneous medium. The boundary-value problem governing a three-phase concentric cylinders model is used to analyze annular interfacial crack problems with Love's strain functions. The complex form of a singular integral equation of second kind is formulated using Bessel's functions in Fourier domain. Stress intensity factors (SIF) and total strain energy release rates (SERR) are calculated using Jacoby polynomials. For validity of the equations of Stress Intensity Factors, the Singular Integral Equation (SIE) of a three concentric cylinders model is reduced to the SIE for a two concentric cylinders model and results are compared with previous results of Erdogan.     

Current distribution, resistance, and inductance forsuperconducting strip transmission lines

A method for the calculation of the current distribution, resistance, and inductance matrices for a system of coupled superconducting transmission lines having finite rectangular cross-section is presented. These calculations allow accurate characterization of both high-T_c and low-T _c superconducting strip transmission lines. For a single stripline geometry with finite ground planes, the current distribution, resistance, inductance, and kinetic inductance are calculated as functions of the penetration depth for various film thicknesses. These calculations are then used to determine the penetration depth for Nb, NbN, and YBa₂Cu₃O_7-x superconducting thin films from the measured temperature dependence of the resonant frequency of a stripline resonator. The calculations are also used to convert measured temperature dependence of the quality factor to the intrinsic surface resistance as a function of temperature for an Nb stripline resonator     

Maximum power density for an endoreversible carnot heat engine

An analysis using maximum power-density criteria has been carried out for an endoreversible Carnot heat engine. The results have been compared with known results on maximum power analysis. The design parameters at maximum power density lead to smaller and more efficient endoreversible Carnot heat engines than those working at maximum power output.     

Some pharmacologic and toxicologic studies on Rhazya stricta decne in rats, mice and rabbits

1. This work examines some in vivo and in vitro pharmacologic and toxicologic effects of extracts of Rhazya stricta, a medicinal plant in the United Arab Emirates. 2. R. stricta extracts at doses of 0.1-10 mg reduced the mean arterial blood pressure (MBP) of anesthetized rats in a dose-dependent manner. The depressor effect was partially sensitive to atropine (5 microM). Although the MBP was reduced by 50% by both doses of extracts, the normal electrocardiogram pattern and the heart rate remained unaltered. 3. Acute treatment of rats with the lyophilized extract at doses of 4 g/kg produced a significant rise in insulin concentration. In streptozotocin-diabetic rats loaded orally with glucose (1 g/kg), R. stricta at doses of 8 g/kg produced significant decreases in plasma glucose concentration at 0.5 and 1 h after treatment. 4. Chronic treatment of rats and mice for 28 days with the lyophilized extract of R. stricta did not affect the plasma glucose or insulin concentration or any of the hematological or biochemical indices measured. 5. The extracts of R. stricta (0.5-4 g/kg) dose-dependently decreased the gastrointestinal transit time in mice by 4-50%. 6. The butanolic extract of R. stricta (1 and 2 g/kg) significantly reduced the carrageenan-induced increase in raw paw edema 3 and 4 h after the extract administration. 7. The rectal temperatures of normothermic and pyrexic rats were reduced significantly 0.5 and 1 h after administration of butanolic R. stricta at doses of 1 and 2 g/kg. 8. The butanolic extract of R. stricta at doses of 1 and 2 g/kg significantly increased the reaction time on the hot plate 30 and 60 min after administration to rats. 9. At concentration < 0.05 mg/ml (bath concentration), lyophilized water and butanol extracts of R. stricta potentiated the twitch responses induced by indirect electrical stimulation in the rat phrenic nerve diaphragm preparation. The responses were inhibited by concentrations > 0.05 mg/ml. Neostigmine (2 x 10(-4)M) did not alter these effects of the extracts. 10. R. stricta extracts dose-dependently decreased the force of contraction and heart rate of the isolated rabbit heart. Atropine (1 x 10(-5)M) had no effect on the inhibitory activity of these extracts. The lyophilized water extract (> 10 mg) and butanol extract (> 5 mg) produced irreversible inhibition and disturbances in the force of contraction and heart rate.     

Handover signalling for microcellular environments

A new strategy for routing handover signalling in microcellular environments is proposed. Simulation results show that time delay for handover packets travelling across the fixed network could be reduced by diverting the signalling through the air interface between the serving and the candidate base station (BS)     

Validity of dynamic electrochemical impedance spectra of some amine corrosion inhibitors in petroleum/water corrosive mixtures by Kramers-Kronig transformation

In our previous works, the corrosion inhibition properties of propylamine (PA), iso-propylamine (i-PA), butylamine (BA), tert-butylamine (t-BA), hexylamine (HA), ethylenediamine (EDA), diethanolamine (DEA), 3-amino-1-propanol (3-AP), 2-dimethylethanolamine (2-DEA), cyclohexylamine (CHA), N-methylcyclohexylamine (N-MCA) and dicyclohexylamine (DCHA) have been investigated by means of electrochemical impedance spectroscopy (EIS) with a carbon steel rotating disc electrode in some petroleum/water corrosive mixtures containing acetic acid and NaCl at 25 °C. In this work, the Kramers-Kronig transformations (KKTs) were applied to evaluate the validity of the impedance data of these amine compounds in hydrodynamic condition. The results obtained showed that experimental impedance data did not satisfy in K-K relations completely viz. indicated some errors. These errors were related to stray capacitances, external transmission line effects, pits formation and change in interface during data acquisition at high and low frequencies regions. In addition, the selection of a suitable equivalent circuit strongly emphasized to better interpret of EIS data which in turn cause better resulted KKTs spectra. With considering obtained transformations, more effective inhibitor was selected with regard to its charge transfer resistance, the corrosion capacitance and well satisfying in K-K relations.     

Synthesis and activation of Pt nanoparticles with controlled size for fuel cell electrocatalysts

Well-dispersed Pt nanoparticles with controlled size and narrow size distribution were prepared by polyalcohol reduction of platinum acetylacetonate, using oleylamine as a capping agent. The particle size was varied from 3.5 nm to 11.5 nm by decreasing the amount of oleylamine added in the synthesis. Size selection of the as-prepared particles by solvent fractionation yielded nearly monodispersed Pt particles. The as-prepared particles were loaded on a carbon support by physical deposition, but showed no electrocatalytic activity due to the oleylamine bound to the particle surface. The particles were activated for electrocatalysis after heating the particles in air at 185 °C for 5 h, conditions that gave no particle-sintering and no oxidation. Cyclic voltammetry showed that the particles after the heat treatment in air were electrocatalytically active for methanol oxidation. The smaller 3.5 nm and 4.0 nm Pt particles had a higher intrinsic activity for methanol oxidation, but a lower tolerance to CO poisoning, compared with 6.0 nm, 9.5 nm and 11.5 nm particles. CO-stripping results suggest that CO is more easily oxidized on larger Pt particles.