Joining of multiwall carbon nanotubes for the end-contact configuration by applying electric current

Multiwall carbon nanotubes (MWNTs) were manipulated in a transmission electron microscope, and the joining of two capped MWNT tips was performed by applying an electric current to the tips. The inosculation process was observed in situ while simultaneous current and bias voltage measurements were performed. Under application of a current of 95.9 μA across the contact region between the two MWNT tips, the formation of a tubular structure occurred only at the outermost wall layers of the MWNTs. At a higher current of 126.9 μA, the tubular structure collapsed without forming bonds between the inner wall layers of the two MWNTs. These results suggest that it is difficult to join the inner wall layers at the tips of MWNTs by only the control of the electric current.     

Liquefaction and dechlorination of hydrothermally treated waste mixture containing plastics with glass powder

Additive effects of glass powder upon the product yields and chlorine distribution after liquefaction of hydrothermally pretreated mixed waste (HMW) are compared with liquefaction of HMW with any one of water, quartz sand, or glass powder plus water. As a result, addition of either water or quartz sand did not affect liquefaction and dechlorination of HMW. Further, water (5 g) addition did not enhance liquefaction and dechlorination of HMW with glass powder. On the other hand, after liquefaction of HMW with glass powder, the yields of chlorine in the gas and water insoluble constituents decreased and the chlorine yield in the water-soluble constituent increased significantly. Because sodium in glass powder dissolved in a small amount (0.5 g) of water resulted from dehydration of HMW during liquefaction. Further, hydrogen chloride derived from polyvinylchloride in HMW was neutralized by ion exchange between H(+) and Na(+) dissolved in a small amount of water forming NaCl in the Residue (water-soluble) constituent. Therefore, most of chlorine in HMW was removed easily by water extraction of the Residue constituent after liquefaction of HMW with glass powder. Further, upgrading of HMW into the oil constituent was enhanced due to inhibition of production of chlorine containing organic compounds. Accordingly, it was clarified that glass powder was the most effective additive for liquefaction and dechlorination of HMW.     

Relation of crack-induced current shunting to transport current and n-value in DyBCO-coated superconductor

Transport current and n-value of DyBCO-coated conductor pulled in tension were measured experimentally and their relation to crack-induced current shunting was analyzed with the partial crack-current shunting model. The following features were revealed. The shunting current increases with increasing transport current and with increasing crack size. At low voltage where shunting current is low, the transport current of cracked sample normalized with respect to the transport current in non-cracked state is described with the modified ratio of non-cracked area to overall cross-sectional area of superconducting layer. At high voltage where the shunting current is high, the normalized transport current becomes higher than the modified ratio of non-cracked area. The increase in shunting current with transport current (and voltage) leads to a decrease in n-value at high current (voltage). This phenomenon is enhanced by crack extension.     

Effect of dietary fats and sesamin on the lipid metabolism and immune function of Sprague-Dawley rats

We examined the effect of three dietary fats, safflower oil (SAF) rich in linoleic acid, borage oil (BOR) rich in gamma-linolenic acid, and perilla oil (PER) rich in alpha-linolenic acid, on the lipid metabolism, and chemical mediator and immunoglobulin levels in Sprague-Dawley rats, as well as the dietary effect of sesame-derived antioxidative sesamin. The serum cholesterol, phospholipid, triglyceride, prostaglandin E2 level and splenic leukotriene B4 level were lower in the rats fed on BOR or PER than in those fed on SAF. SES feeding suppressed the expression of the lipid-decreasing effect of BOR, but not in the rats fed on PER. In respect of the fatty acid composition of the liver and spleen, PER feeding gave a lower arachidonic acid level, and higher eicosapentaenoic and docosahexaenoic acid levels than SAF feeding did, while the effect of BOR feeding was marginal. The effect of SES feeding on fatty acid composition was much smaller than that of dietary fats. In respect of immunoglobulin production, PER + SES feeding gave the lowest IgE productivity in the mesenteric lymph node lymphocytes. These results suggest that PER feeding regulated lipid metabolism and exerted an anti-allergic effect by a different mechanism from that with BOR feeding.     

Local damage to reinforced concrete structures caused by impact of aircraft engine missiles Part 1. Test program, method and results

Structural damage induced by an aircraft crashing into a reinforced concrete structure includes local damage caused by the deformable engines, and global damage caused by the entire aircraft. Local damage to the target may consist of spalling of concrete from its front face together with missile penetration into it, scabbing of concrete from its rear face, and perforation of missile through it. Until now, local damage to concrete structures has been mainly evaluated by rigid missile impact tests. Past research work regarding local damage caused by impact of deformable missiles has been limited. This paper presents the results of a series of impact tests of small-, intermediate-, and full-scale engine models into reinforced concrete panels. The purpose of the tests was to determine the local damage to a reinforced concrete structure caused by the impact of a deformable aircraft engine.     

Hepatitis C infection risk analysis: who should be screened? Comparison of multiple screening strategies based on the National Hepatitis Surveillance Program

Children with cerebral palsy (CP) display postural problems, largely interfering with daily life activities. Clarification of neural mechanisms controlling posture in these children could serve as a base for more successful intervention. Studies on postural adjustments following horizontal forward and backward displacements of a movable platform in ten school-age children with spastic diplegia and non-disabled controls revealed that sitting CP children, like standing CP children, show direction specific postural adjustments, indicating that the basic pattern of muscle coordination in these conditions is conserved. Dysfunctions are especially present in the modulation of the response pattern of ventral muscles during forward translations. They consist of: (1) a stereotyped and non-variable activation of all ventral muscles; (2) an abnormal top-down muscle recruitment; and (3) an excessive degree of antagonistic co-activation. The altered patterns of muscle coordination could be the result of two interacting mechanisms, the primary deficit due to the early brain damage and a compensation due to the postural instability. Especially the latter dysfunction furnishes opportunities for therapeutic help.     

An approach for quantum mechanical modeling and simulation for MOS devices, covering the whole operation region

A quantum mechanical (QM) approach for modeling and simulation of MOS devices, covering the whole operation region, was proposed. This formulation is applicable continuously from the subthreshold to the saturation regions, since it exactly treats the QM effects on the in-depth distribution of the gate induced carriers in the channel by solving one dimensional Poisson equation and Schrödinger equation self-consistently and it treats the lateral drift–diffusion transport using quasi-Fermi potential. A QM simulator was implemented using this QM approach. This QM simulator was verified by classical three-dimensional device simulator, CADDETH, in the whole range of operation of bulk MOSFET with low dopant density where QM effect is negligible. The QM simulation elucidated that the threshold voltage shift in thin SOI MOSFETs in saturation region as well as in linear region results from energy shift of the lowest conduction electron level and effective increase of gate oxide thickness.     

Prediction method of unburnt carbon for coal fired utility boilerusing image processing technique of combustion flame

A method for predicting unburnt carbon in a coal-fired utility boiler has been developed using an image processing technique. The method consists of an image processing unit and a furnace model unit. The temperature distribution of combustion flames can be obtained through the former unit. The latter calculates dynamics of the carbon reduction from the burner stages to the furnace outlet using coal feed rate, air flow rate, and the chemical and ash content of the coal. An experimental study in the Sendai Power Station of Tohoku Electric Company Inc. shows that the prediction error of the unburnt carbon can be reduced to 10%. The results show that the unburnt carbon prediction algorithm could be widely used for evaluation, optimization and diagnosis of combustion systems for various boiler and coal types