Validation of a Three-Dimensional Computational Fluid Dynamics Model of a Contact Tank

A three-dimensional (3D) computational fluid dynamics (CFD) model of a contact tank is presented in this paper. The model results are compared against 3D velocities and flow through curve (FTC) data, representing a tracer concentration profile, from a 1:8 scale physical model. The objective is to demonstrate that CFD models can simulate both the FTC and the 3D velocity field quite well. Simultaneous validation of velocities and FTC is important in ascertaining the predictive capabilities of CFD models, as physical model studies indicate that different baffle arrangements can lead to similar FTCs. Therefore, a good prediction of only FTC, as presented in previous 3D CFD model studies, does not necessarily imply a correct simulation of the flow field.     

Catalytic decomposition of biomass tars with iron oxide catalysts

Catalytic gasification of wood (Cedar) biomass was carried out using a specially designed flow-type double beds micro reactor in a two step process: temperature programmed non-catalytic steam gasification of biomass was performed in the first (top) bed at 200–850 °C followed by catalytic decomposition gasification of volatile matters (including tars) in the second (bottom) bed at a constant temperature, mainly 600 °C. Iron oxide catalysts, which transformed to Fe₃O₄ after use possessed catalytic activity in biomass tar decomposition. Above 90% of the volatile matters was gasified by the use of iron oxide catalyst (prepared from FeCl₃ and NH_3aq) at SV of 4.5 × 10³ h^?1. Tar was decomposed over the iron oxide catalysts followed by water gas shift reaction. Surface area of the iron oxide seemed to be an important factor for the catalytic tar decomposition. The activity of the iron oxide catalysts for tar decomposition seemed stable with cyclic use but the activity of the catalysts for the water gas shift reaction decreased with repeated use.     

Using Automated Negotiation for Grid Services

The popularity of grid services has widened their application to numerous domains and increased the utilization of computational resources. In order to create more incentives for the resources owners to lease their resources and prevent users from wasting the resources, the introduction of a market-oriented grid is inevitable. However, the issues for the negotiation between service provider and consumer over the supply and demand of resources can be complex, with highly interdependent issues. In this research, a simulated automated negotiation mechanism including a co-evolutionary mechanism and a modified game theory approach is proposed, to assist them in reaching an agreement over the conflicting issues. In the proposed architecture, the co-evolution process is able to reduce the multiple dimensional search space into a two-dimension search space and identify the appropriate negotiation strategies for the negotiating agents to form a payoff matrix which can be used for the game theory related stage of their interaction. The multiple stage negotiation process is introduced to improve the negotiation result. In this paper, an application which requires a large amount of computational resources to process the data generated from mobile devises is used to demonstrate that the proposed system is able to resolve the conflicts and obtain a valid solution.     

A study of neutron and gamma radiation effects on transmission of various types of glasses, optical coatings, cemented optics and fiber

A study of radiation effects on various types of glasses, dielectric optical coatings, cemented optics and fiber was undertaken with a view to select them for extreme radiation environments. Samples were exposed to different radiation doses in the Pakistan Research Reactor-I (PARR-I) for neutron and Cobalt 60 source for gamma irradiation. Transmissions were measured before and after irradiation. The dielectric coatings were subjected to additional tests (adhesion, abrasion and humidity, etc.) as per MIL-M-13508C and MIL-C-675C. All 15 glasses studied showed varying amounts of transmission loss as expected, with negligible degradation for three types. Recovery of transmissions with time/ageing was also studied, with more or less complete recovery with temperature annealing. A faster bleaching of darkened/brown glasses was achieved by using UV lamps or UV laser. The dielectric coatings (HR, AR) and one of the two commercial optical cements showed excellent resistance to neutrons and gamma radiations, and could be good candidates for the fabrication and utilization of optical components in extreme radiation environments. The data allowed several Chinese glasses to be studied for the first time.     

Energy management for battery-powered reconfigurable computing platforms

We define portable reconfigurable computing platforms as those which have some form of configurable logic coupled with other on-chip or off-chip processing units such as soft processors, embedded processors, and voltage-scalable processors. In the first part of this paper, we present and test a unique methodology where we dynamically change the active area of a field programmable gate array (FPGA) to vary the battery usage and lifetime of the system, by running it on several different taskgraph structures and report an average of 14% and as high as 21%, less battery capacity used, as compared to nonoptimal execution. In the second part of this paper, we integrate the above methodology with more traditional voltage and frequency scaling techniques for portable systems and present a heuristic iterative algorithm for single and multiple processing units. The iterative heuristic algorithm finds a sequence of tasks along with an appropriate design point (implementation option) for each task, such that a deadline is met and the amount of battery energy used is as small as possible. We have used several real-world benchmarks to test the effectiveness of this methodology and we will present the results.     

Capacitor coupled converter (C3) for high power DCconversion

The bang-bang controlled capacitor coupled converter (C³) is described in this paper. Due to the converter's inherent commutating property, the C³ can accommodate thyristors as well as high-power gate turn-off switches, due to zero-current switching transitions. The zero-current switching is achieved at no current stress increase, therefore, the topology is considered appropriate for high-power processing. DC and small signal AC models are derived for the bang-bang controlled C³, a design procedure is proposed, and simulation results are discussed. Finally, oscillograms from a proof of principle prototype circuit are presented     

Rheumatic heart disease in India

A cross-sectional study was carried out in rural areas of Jawan Block, District Aligarh, Uttar Pradesh, India, covering a total population of 3760 drawn from 11 villages. The total number of confirmed cases of rheumatic heart disease was 24 with a prevalence rate of 6.4 per 1000 of the general rural population. The prevalence of rheumatic heart disease increased with age until the age of 25 years. Females were more prone to rheumatic heart disease compared to males. Socio-economic class had a direct impact on the occurrence of rheumatic heart disease.     

Diurnal and environmental characterization of solar photovoltaic panels using a PC-AT add on plug in card

This article describes the development of an instrumentation system for characterizing photovoltaic panels. It uses an add on card (which contains DAC, ADC and digital input/output ports) in conjunction with a PC-AT. The panels in a field are selected in succession through a set of relays actuated by the digital output port. The selected panel is loaded in discreet steps by a transistor loading circuit which is activated by the digital to analog convertor to trace the most significant portion of the I-V curve. The data shows that the power output is invariably lower than that specified by the manufacturer. The reasons for drop in output have been analyzed. It is shown that these effects can be represented by the curvature of I-V characteristic at the maximum power point (OP). The loss of power due to accumulation of dust and the increase in temperature of the panels can be significant.     

Differential cellular response within the rabbit tendon unit following tendon injury

Since 1975, 340 patients were treated by tracheal sleeve resection for tracheal or subglottic laryngeal iatrogenic stenoses in our unit. Preoperative iterative Nd YAG laser sessions have usually been performed, without success. The length of the sleeve specimen was an average of 3 1/4 cm. Twelve patients died on the post operative course (3.5%), 3 more patients died later after failure of the procedure (0.9%) and nineteen had recurrent stenoses treated with use of a tracheostomy tube, a permanent Montgomery tube, or an endotracheal stent (5.6%). Three hundred and six patients are definitely cured (90%), at the first attempt for 265 patients, after a laser session for granulomas for 20 patients, after a second tracheal resection for 6 patients and after a temporary Montgomery tube for 15 patients. Providing there is a good selection of the patients, tracheal sleeve resection is the best treatment for iatrogenic stenosis.