Narrow‐band interference suppression in wavelet packets based multicarrier multicode CDMA overlay system

The wavelet packets based multicarrier (MC) multicode (MCD) code‐division multiple‐access (CDMA) transceiver consists of the MCD part, which ensures the transmission for high speed and flexible data rate; the MC part contributing to robustness to frequency‐selective fading and flexibility for handling multiple data rates; and wavelet packets (WPs) modulation technique, which contributes to the mitigation of the interference problems. As WPs have lower sidelobes compared with sinusoidal carriers, this system is very effective in reducing the problem of inter‐carrier interference. Of course, like any CDMA system, the system can suppress a given amount of interference. This paper considers an interference suppression scheme which will enhance the performance of the system. The receiver employs suppression filters to mitigate the effect of narrow‐band jammer interference. The framework for the system and the performance evaluation are presented in terms of the bit error rate and the outage probability over a Nakagami fading channel. Also, we investigate how the performance is influenced by various parameters, such as the number of taps of the suppression filter and the ratio of narrow‐band interference bandwidth to the spread‐spectrum bandwidth. Finally, the performance of the system is compared with the performance of sinusoidal based MC/MCD‐CDMA system denoted Sin‐MC/MCD‐CDMA. Copyright © 2012 John Wiley & Sons, Ltd.     

A modified thermodynamic insight to deliquescence of a void‐containing nanocrystal confirmed by MD simulation

Existence of voids in crystalline structures can affect their physical and chemical properties considerably. When the size of the crystal reaches to nanoscale, experimental determination of its void fraction is difficult. In this work, a molecular dynamics approach is introduced to find equilibrium void fractions of a simple cubic (CsCl) and fcc (KCl) nanocrystals by determination of their deliquescence relative humidity (DRH) for different sizes and void fractions and extrapolation of the results to the bulk limit. To confirm the simulation results, the size dependency of DRH to the nanoparticle size was studied thermodynamically by inclusion of size‐dependent density of water nanodroplet which leads to a simple homographic equation. This method proposes the equilibrium void percents of CsCl and KCl nanoparticles to be 10 and 15%, respectively, which are obtained by extrapolation of the results to the bulk limit. The success of obtained Möbius function was also confirmed by fitting it to experimental data for deliquescence of NaCl nanoparticles which implies the importance of considering density of water nanodroplet as a size dependent quantity. Also, using the mentioned thermodynamic approach, void dependency of deliquescence for the nanoparticles was found to be as a quasi‐linear trend which is compatible with the simulation results. It is noticeable that the approach used this work for determination of equilibrium void fraction is only valid if the utilized force fields are accurate. © 2016 American Institute of Chemical Engineers AIChE J, 62: 4066–4077, 2016     

Processing of High‐Density Magnesia Spinel Electro‐Conducting Ceramic Composite and its Oxidation at 1400°C

Dense conductive ceramic composites of MgAl₂O₄ and MoSi₂ were processed using combustion synthesis under‐load methodology. The starting reactants were blends of MoO₃, SiO₂, MgO, and Al powders. The study revealed that to obtain dense composite with homogeneous microstructure, 30 wt. % of MoSi₂, 18.5 μm Al average particle size, and 175 MPa load are required. The produced dense composite was found to have a low apparent porosity (<1.0 vol. %), moderate density 4.61 g/cm³, and low electrical resistivity 0.3 Ωcm. The dense composite exhibited excellent thermodynamic stability between its phases at 1400°C in open atmosphere.     

Flocculation and viscoelastic behavior of industrial papermaking suspensions

The effects of the surface charge type and density C496, C492 and A130LMW polyacrylamides (PAMs) on the rheological behavior of real industrial papermaking suspensions were quantitatively related to the degree of flocculation for the same industrial papermaking suspensions. The floc sizes were larger but less dense when anionic PAM was used, and this due to the repulsive forces between the anionic PAM and colloidal particles, leading to the development of open structure flocs of less density. On the other hand, rheological measurements showed that the papermaking suspension is thixotropic with a measurable yield stress. The results showed that the magnitude of the critical stress, τ _c , complex viscosity, η*, elastic modulus, G′, and viscous modulus, G″, depend on the number of interactions between the PAM chains and particle surface and the strength of those interactions. Cationic PAM showed higher values of η*, G′, G″ and τ _c compared to anionic PAM. This behavior is in good agreement with Bingham yield stress, τ _B , adsorption and effective floc density results. Similar to oscillatory measurements, creep measurements also showed that the deformation was much lower for the cationic PAM based suspensions than for the anionic PAM based suspensions. Furthermore, the results revealed that increasing the cationic PAM surface charge decreases the floc size but increases the adsorption rate, elasticity and effective floc density proposing differences in the floc structures, which are not revealed clearly in the Bingham yield stress measurements.     

Nickel‐Catalyzed Reductive Benzylation of Aldehydes with Benzyl Halides and Pseudohalides

The reductive benzylation of aromatic and aliphatic aldehydes with benzylic halides is reported using a nickel/zinc catalyst system. In addition to benzylic halides, the first report on the addition of benzylic triflates, acetates, tosylates and tritylates to aldehydes is also presented. By this new method a range of alcohols was synthesized efficiently from aldehydes and benzylic substrates at room temperature in moderate to high yields. The mild reaction conditions and good functional group tolerance make this nickel‐catalyzed process synthetically useful for the synthesis of diverse benzylic alcohols.

     

Tea and coffee consumption in relation to vitamin D and calcium levels in Saudi adolescents

ABSTRACT: BACKGROUND: Coffee and tea consumption was hypothesized to interact with variants of vitamin D-receptor polymorphisms, but limited evidence exists. Here we determine for the first time whether increased coffee and tea consumption affects circulating levels of 25-hydroxyvitamin D in a cohort of Saudi adolescents. METHODS: A total of 330 randomly selected Saudi adolescents were included. Anthropometrics were recorded and fasting blood samples were analyzed for routine analysis of fasting glucose, lipid levels, calcium, albumin and phosphorous. Frequency of coffee and tea intake was noted. 25-hydroxyvitamin D levels were measured using enzyme-linked immunosorbent assays. RESULTS: Improved lipid profiles were observed in both boys and girls, as demonstrated by increased levels of HDL-cholesterol, even after controlling for age and BMI, among those consuming 9--12 cups of coffee/week. Vitamin D levels were significantly highest among those consuming 9--12 cups of tea/week in all subjects (p-value 0.009) independent of age, gender, BMI, physical activity and sun exposure. CONCLUSION: This study suggests a link between tea consumption and vitamin D levels in a cohort of Saudi adolescents, independent of age, BMI, gender, physical activity and sun exposure. These findings should be confirmed prospectively.     

Structure effect of some amine derivatives on corrosion inhibition efficiency for carbon steel in acidic media using electrochemical and Quantum Theory Methods

The structure effect on corrosion inhibition of two amines and their derivatives is the main object of this article. The first amine was 1,8-diaminooctane and its ethoxylated (50 e.o.) 1,8-diaminooctane and propoxylated (50 p.o.) 1,8-diaminooctane. The second amine is the tetraethylenepentamine and its ethoxylated (50 e.o.) and propoxylated (50 p.o.) derivatives. The investigations were carried out by open circuit potential, potentiodynamic polarization, electrochemical impedance, quantum calculations and SEM measurements. The data obtained for the first amine showed the minimum inhibition efficiency (65.5%), meanwhile the maximum inhibition efficiency was 78.9% for its propoxylated derivative. On the other hand the maximium inhibition efficiency was 91% for the second propoxylated amine. The electronic properties; HOMO and LUMO energy levels, energy gap, dipole moment, polarizability, log P, total energy, charge densities, area/molecule and hydration energy have been calculated. The inhibition efficiency was calculated theoretically using the electronic parameters. From the obtained results, there is a significant difference between the inhibition efficiency of the electronic and the inhibition efficiency experimentally. The results were discussed on the light of the chemical structure of the used inhibitors. In general, the inhibition efficiency is affected by the shape and structure of the molecule.     

Thermal performance of different pond cells under actual climatic conditions in Qatar

Experimental work was undertaken to study the thermal performance of three different pond cells under actual climatic conditions of Qatar. The first cell was an open pond. In the second unit, a finned radiator, painted black, was placed over the pond. In the third cell, the water was contained in a polyethylene bag. Experimental results indicated that the exposed pond cell came out best, when considered in terms of how quickly the temperature of the stored water could be reduced, and how low that temperature could be. The water in the exposed pond was cooled directly (by evaporation and radiation to sky) whereas in the case of the finned radiator cell, heat had to be transferred from the stored water to the radiator, and then from the radiator to the surrounding. In the case of water-in-bag cell, evaporation was eliminated and radiative exchange with the sky was reduced due to the partial transparency of the polyethylene bag (in the infrared region).