Biodegradable hollow microfibres to produce bioactive scaffolds

Biodegradable hollow microfibres containing particles loaded with specific active agents can be potentially employed to produce a special kind of substrate for tissue engineering, able to function as a scaffold and at the same time to act as a drug‐releasing system. Biodegradable hollow microfibres based on poly(lactic acid) were produced by a dry–wet spinning procedure. Drug‐loaded microparticles were prepared by a simple oil‐in‐water emulsion and entrapped inside the fibres. The morphology of both fibres and particles was investigated by scanning electron microscopy. The mechanical and thermal properties of the fibres were investigated by tensile tests and differential scanning calorimetry. In vitro tests were performed to evaluate the release of the drug from the fibres loaded with the particles Copyright © 2004 Society of Chemical Industry     

Retaining maximum antioxidative potency of wheat germ oil refined by molecular distillation

A process of physical refining wheat germ oil using the technique of molecular distillation (MD) is presented in this work. Wheat germ oil was obtained from the germ by solvent extraction using hexane and also by cold pressing. The oil extracted with hexane was degummed and bleached before deacidification in order to modify the parameters of phosphorus and color. The goal in carrying out the stage of physical refining by MD was to preserve the maximum amount of original antioxidative potential obtained from extraction of the crude oil. The effect of evaporation temperature of one‐stage MD on the efficiency of free fatty acid elimination was studied. The antioxidant portion was followed by means of analytic determination of tocopherols by high‐performance liquid chromatography. Tocopherol retention up to 98% was achieved in the oil extracted by pressing, and yields of up to 96% were achieved in the oil extracted with hexane. Copyright © 2007 Society of Chemical Industry     

Development of catalysts for hydrogen generation from hydride compounds

Catalytic hydrolysis of NaBH₄ and NH₃BH₃ has been studied. It was shown that the nature of the support and the active component of the catalyst affect the H₂ generation rate. Despite similar sizes of rhodium particles formed on the surface of different supports (γ-Al₂O₃, TiO₂, carbon), their reactivity is different. Rh/TiO₂ with low rhodium concentration (1 wt.%) is the most active catalyst both in the hydrolysis of NaBH₄ and NH₃BH₃. The obtained results show that the rhodium chloride interaction with titania determines the reactivity of rhodium particles formed under action of NaBH₄ medium. TEM, DRS UV–vis and XPS were used to characterize the catalysts.     

Co- and Ni-exchanged ferrierite: The contribution of synchrotron X-ray diffraction data to siting of TMIs

High-silica zeolites exchanged with transition metal ions (TMIs) are the subject of great interest for their unusual catalytic activity and selectivity. Structural information like coordination and accessibility of TMIs in zeolites are important factors for understanding their catalytic activity. Siting of TMIs in zeolites is typically obtained by spectroscopic (EXAFS, EPR, UV–vis and IR) and computational methods, as in the case of Co-ferrierite. However, some controversy exists in the literature concerning the model for incorporation of bare Co ions in ferrierite. We show here that the results of our synchrotron X-ray powder diffraction studies on Co- and Ni-exchanged ferrierite (Si/Al = 8.5) are in a good agreement with the model of Co siting based on an indirect spectroscopic approach and help to validate this model. By direct structural evidences, a possible explanation for the larger catalytic activity of Co sites in the main channels of ferrierite can be inferred. A combination of data from in situ XRD continuous monitoring of the Co ion migration during calcination and crystal-chemical considerations allows to device a strategy for the design of optimised co-cations containing Co-ferrierite catalysts.     

Immunoelectron localization of mitochondrial F1 factor in cryosections of heart muscle cells

Immunocytochemistry was used to investigate the localization of F1 ATPase in mitochondria of cryosections of adult mouse heart muscle cells. The initial aldehyde fixation was the only denaturation step for antigens. The fine structure was preserved with contrast enhancement as the sections were maintained hydrated, with the advantage that the entire procedure is completed in one working day. The reaction was highly specific, and entire mitochondria were labeled with the Protein A-gold complex. A new analytical technique, electron spectroscopic imaging (ESI), contributed to a better visualization of the localization of the F1 factor.     

Structural Response of Nuclear Containment Shield Buildings with Construction Openings

Steam generator replacement at nuclear power plants requires large construction openings in nuclear containment structures. This study examines the effects of such openings placed in a 61?cm (2?ft) thick dome of a shield building. The dome is cast in two layers, and the limiting cases of the two layers acting as one and the lower layer carrying the entire load are considered. Without openings, the stresses due to dead load in the structure are very low when compared to the material strength. With openings, the loads are easily redistributed around the opening, and the maximum stresses for the conservative case are between three and four and one-half times larger than in the original structure with no openings. The extent of the affected area around the holes is relatively small. Smooth corners in the openings are necessary to avoid high local stress concentrations.     

Pervasive 2007: It's about the User

Pervasive computing is as much about the user as it is about the technology. So, the Fifth International Conference on Pervasive Computing emphasized desirability rather than just feasibility. Featured themes included user benefits, human-computer interaction, group and social interactions, context awareness, finding and positioning people and objects, and personal privacy.     

Development of New Sulphonyl Resin from Modification of Commercial Resin

Summary This article deals with the handy synthesis of sulfonyl resins, which were produced by the treatment of a commercial sulfonic resin (Lewatit VPOC1812^® based at divinylbenzene (DVB) and styrene (STY). The preliminary chemical modification was based on the reaction of the Lewatit VPOC1812^® with thionyl chloride aiming to produce the sulfonyl chloride groups. The best conditions to obtain the sulfonyl chloride groups were: SOCl₂/SO₃H (molar ratio) =13 at 79 °C during 72 h. The resin chlorinated was afterward treated with urea, thiourea or guanidine. The functionalized resins with urea, thiourea or guanidine were produced with 56, 68 and 93% yield, respectively. The commercial and modified resins were characterized by apparent density, swelling degree, elemental analysis (CHNS), FTIR, optical microscopy (OM) and scanning electron microscopy (SEM).     

Comparison between photocatalytic ozonation and other oxidation processes for the removal of phenols from water

Photocatalytic ozonation (1O₃ + VUV + TiO₂), ozonation (O₃), catalytic ozonation (O₃ + TiO₂), ozone photolysis (O₃ + VUV), photocatalysis (TiO₂ + VUV) and photolysis (VUV) have been compared in terms of formation of intermediates, extent of, mineralization (TOC, COD, chloride, nitrate) and kinetics in the aqueous treatment of three phenols (phenol, p‐chlorophenol and p‐nitrophenol). In all cases, photocatalytic ozonation led to lower degradation times for chemical oxygen demand and total organic carbon removal. Intermediates formed were similar in the different oxidation systems with some exceptions. They can be classified into three different types: polyphenols (resorcinol, catechol, hydroquinone), unsaturated carboxylic acids (maleic and fumaric acids) and saturated carboxylic acids (glyoxylic, formic and oxalic acids). First order kinetic equations have been checked for the oxidation processes studied in the case of the parent compound. Rate constants of these systems have also been calculated. Copyright © 2005 Society of Chemical Industry