Matrix Transformation in Boron Containing High-Temperature Co–Re–Cr Alloys

An addition of boron largely increases the ductility in polycrystalline high-temperature Co–Re alloys. Therefore, the effect of boron on the alloy structural characteristics is of high importance for the stability of the matrix at operational temperatures. Volume fractions of ε (hexagonal close-packed—hcp), γ (face-centered cubic—fcc) and σ (Cr₂Re₃ type) phases were measured at ambient and high temperatures (up to 1500 °C) for a boron-containing Co–17Re–23Cr alloy using neutron diffraction. The matrix phase undergoes an allotropic transformation from ε to γ structure at high temperatures, similar to pure cobalt and to the previously investigated, more complex Co–17Re–23Cr–1.2Ta–2.6C alloy. It was determined in this study that the transformation temperature depends on the boron content (0–1000 wt. ppm). Nevertheless, the transformation temperature did not change monotonically with the increase in the boron content but reached a minimum at approximately 200 ppm of boron. A probable reason is the interplay between the amount of boron in the matrix and the amount of σ phase, which binds hcp-stabilizing elements (Cr and Re). Moreover, borides were identified in alloys with high boron content.     

Development of a Continuous Segmented Flow Tubular Reactor and the “Scale‐out” Concept – In Search of Perfect Powders

The synthesis of powders with controlled shape and narrow particle size distributions is still a major challenge for many industries. A continuous Segmented Flow Tubular Reactor (SFTR) has been developed to overcome homogeneity and scale‐up problems encountered when using batch reactors. Supersaturation is created by mixing the co‐reactants in a micromixer inducing precipitation; the suspension is then segmented into identical micro‐volumes by a non‐miscible fluid and sent through a tube. These micro‐volumes are more homogeneous when compared to large batch reactors leading to narrower size distributions, better particle morphology, polymorph selectivity and stoichiometry. All these features have been demonstrated on single tube SFTR for different chemical systems. To increase productivity for commercial application the SFTR is being “scaled‐out” by multiplying the number of tubes running in parallel instead of scaling‐up by increasing their size. The versatility of the multi‐tube unit will allow changes in type of precipitate with a minimum of new investment as new chemistry can be researched, developed and optimised in a single tube SFTR and then transferred to the multi‐tube unit for powder production.     

Context-Processing Deficits in Schizotypal Personality Disorder.

Research suggests that schizotypal personality disorder (SPD) is a part of the spectrum of schizophrenia-related illnesses. This article hypothesizes that a deficit in the representation and maintenance of context is a core cognitive disturbance in schizophrenia and that SPD individuals should demonstrate context-processing deficits. To test this hypothesis, the authors administered 3 versions of their AX-CPT task, designed to assess context processing, to 35 healthy controls and 26 individuals with DSM-IV SPD. They also administered working memory and selective attention tasks. SPD individuals displayed context representation deficits similar to those found in schizophrenia but did not show the same additional deficits in context maintenance. Context processing was strongly associated with working memory and selective attention performance in the SPD individuals. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Calorimetric investigations on As-Te-Se and Ge-As-Se glasses

Results of calorimetric investigations performed on two groups of glasses, viz. As-Te-Se and Ge-As-Se, are described. The glass transition temperatureT _g and specific heat at constant pressureC _p of these two families of glasses have been determined using a differential scanning calorimeter. The composition dependence of glass transition temperature and variation of heat capacity during transition are discussed.     

REENGINEERING DONE RIGHT Intermediate Solutions That Are Cost-Effective

Effective systems development techniques attract a lot of attention, but little has been done to effectively address systems maintenance. This article describes an effective, proven approach to resurrecting existing systems and Increasing their useful life, using a system that employs both software tools and a rigorous methodology.     

Opsin/all-trans-retinal complex activates transducin by different mechanisms than photolyzed rhodopsin

In rhodopsin, the 11-cis-retinal chromophore forms a complex with Lys296 of opsin via a protonated Schiff base. Absorption of light initiates the activation of rhodopsin by cis/trans photoisomerization of retinal. Thermal relaxation through different intermediates leads into the metarhodopsin states which bind and activate transducin (Gt) and rhodopsin kinase (RK). all-trans-Retinal also recombines with opsin independent of light, forming activating species of the receptor. In this study, we examined the mechanism by which all-trans-retinal activates opsin. To exclude other amines except active site Lys296 from formation of Schiff bases, we reductively methylated rhodopsin (PM-rhodopsin), which we then bleached to generate PM-opsin. Using spectroscopic methods and a Gt activation assay, we found that all-trans-retinal interacted with PM-opsin, producing a noncovalent complex that activated Gt. The residual nucleotide exchange in Gt catalyzed by opsin was approximately 1/250 lower relative to that of photoactivated rhodopsin (pH 8.0, 23 degrees C). Addition of equimolar all-trans-retinal led to an occupancy of one-tenth of the putative retinal binding site(s) of opsin and enhanced the Gt activation rate 2-fold. When the concentration of all-trans-retinal was increased to saturation, the Gt activation rate of the opsin/all-trans-retinal complex was approximately 1/33 lower compared to that of photoactivated rhodopsin. We conclude that all-trans-retinal can form a noncovalent complex with opsin that activates Gt by different mechanisms than photolyzed rhodopsin.     

The effects of pressure on the isothermal fluid behavior of bituminous coals

An investigation into the effects of pressure (helium gas) on the isothermal fluid behavior includes: (1) the effect of pressure on the rate of melting and coking as evidenced by the rate constants k(melt) and k(coke); (2) the effect of pressure on the energies of activation of melting and coking; (3) the effects of pressure on the characteristic times; (4) the effects of pressure on the maximum isothermal fluidity. Results from the effects of pressure on k(melt) revealed that it was generally the high total sulfur, low nitrogen, low reactives/mineral matter ratio, medium rank coals which show the greatest increase in k(melt), whereas the highest rank coals show the least decrease in k(coke). The energies of activation of melting and coking were not significantly affected by pressure. The investigation also reveals increases or decreases in the respective times of softening, maximum fluidity, resolidification and total time of fluid behavior under isothermal pressurized conditions. There appears the possibility that these shifts may be rank dependent. Additionally, the lower rank coals show the largest relative increase in their fluidities when subjected to pressure. Empirical relationships were derived in order to quantitatively predict the maximum isothermal fluidity for most (fluid) coals at a given pressure.     

Business climate attitudes and company relocation decisions.

A total of 438 manufacturing firms reported their business relocation activity, their overall attitude toward the business climate in Michigan, and their assessment of 34 business climate dimensions. Using a lens model paradigm, we explored reasons for a lack of relation between actual relocation decisions and overall business climate attitudes. Location decisions were most highly correlated with distance and labor considerations, whereas overall business climate was most highly correlated with tax considerations, and secondarily correlated with labor problems. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Short contact time dissolution of vitrinite and inertinite concentrates

The short contact time dissolution of vitrinite and inertinite concentrates of an Australian bituminous coal was studied under isothermal conditions with tetralin as solvent. The reactivity of the two maceral types and the yields and nature of the products were determined for a range of reaction temperatures (400, 420 and 440 °C) and reaction times (2–20 min). The dissolution of vitrinite proceeded at a significantly greater rate than for inertinite and was associated with greater selectivity to soluble non-gaseous products. At very short reaction times (2 min), the vitrinite underwent solubilizing reactions to yield products of higher molecular weight and greater oxygen functionality than was the case for inertinite, for which changes in the chemical nature of the products were negligible over the range of conditions studied. At longer reaction times (5 min), the composition of the vitrinite-derived products was similar to that of the inertinite-derived products.