A sampling theorem for EEG electrode configuration

An analytical tool to help in selecting the number of electrodes required for recording electroencephalogram (EEG) signals is presented. The main assumption made is that the scalp can be modeled as a hemispherical surface. The number of sensors required to sample a surface is derived by using a mean square error (MSE) measure to approximate the continuous potential functions on the hemispherical surface. An algorithm for selecting the number of electrodes for arbitrary head geometries is also proposed. A sampling theorem is then derived with conditions on the sampling points for electrode placement     

The fatigue life of contoured cobalt chrome posterior spinal fusion rods

Intraoperative contouring of posterior rods in lumbar arthrodesis constructs introduces stress concentrations that can substantially reduce fatigue life. The sensitivity of titanium (Ti) and stainless steel (SS) to intraoperative contouring has been established in the literature; however, notch sensitivity has yet to be quantified for cobalt chrome (CoCr), which is now being advocated for use in posterior arthrodesis constructs. The goal of this study is to evaluate the sensitivity of CoCr rods to intraoperative contouring for posterior lumbar screwrod arthrodesis constructs. In this paper lumbar bilateral vertebrectomy models are constructed based on ASTM F1717-01 with curved rods (26-30 degrees total curvature) and poly-axial pedicle screws. Three types of constructs are assembled: first, 5.5 mm SS rods with SS screws (6.5 x 35 mm), second, 6.0 mm Ti rods with Ti screws (7.5 x 35 mm), and third, 6.0 mm CoCr rods with Ti screws (7.5 x 35 mm). All specimens are tested at 4 Hz in dynamic axial compression-bending with a load ratio of ten and maximum load levels of 250, 400, and 700 N until run-out at 2 000 000 cycles. Results are presented that show that the fatigue life of CoCr constructs tend to be greater than Ti constructs at all levels. At the 400 N maximum loading, CoCr lasts an average of 350 000 cycles longer than the Ti constructs. The CoCr constructs are able to sustain the 250 N load until run-out at 2 000 000 cycles but they fail at high load levels (maximum 700 N). The CoCr constructs fail at the neck of the Ti screw at high loads whereas Ti screws fail at the notch induced by contouring. Since CoCr is compatible with magnetic resonance imaging and has high static strength characteristics, the results of this study suggest that it may be an appropriate substitute for Ti.     

Quantitative biology of single neurons

The building blocks of complex biological systems are single cells. Fundamental insights gained from single-cell analysis promise to provide the framework for understanding normal biological systems development as well as the limits on systems/cellular ability to respond to disease. The interplay of cells to create functional systems is not well understood. Until recently, the study of single cells has concentrated primarily on morphological and physiological characterization. With the application of new highly sensitive molecular and genomic technologies, the quantitative biochemistry of single cells is now accessible.     

Assessment of Bioaerosol Generation and Sampling Efficiency Based on Pantoea agglomerans

This study was conducted to evaluate the effect of aerosol generation, relative humidity, and method of sampling on the culturability of the vegetative bacteria Pantoea agglomerans (P. agglomerans) formerly known as Erwinia herbicola. This research has relevance both for the use of this organism as a biowarfare simulant and for bioaerosol exposure assessment and public health. The culturability of P. agglomerans was tested using a test chamber against two generating systems (Collison and Bubble nebulizers), two sampling systems (the all-glass impinger (AGI-30), and the BioSampler), three collection media (water, TSB, and PBS) and across a range of humidities. Results indicated that the Bubble nebulizer was 15% more efficient in generating viable P. agglomerans counts (p ≤ 0.05). No difference was observed in overall efficiency between sampling methods (p > 0.05). However, as a collection media, PBS was observed to yield higher (p ≤ 0.01) viable counts compared to sterile deionized water. Relative humidity was found to strongly influence airborne P. agglomerans culturability. Culturable P. agglomerans was below the limit of detection for RH < 15% and then increased in a log-linear fashion to humidities of 75%. This research will help identify optimal means for evaluation of environmentally sensitive airborne bacteria for purposes of exposure assessment and public health as well as homeland security.     

Hot-drawing of poly(methyl methacrylate) and simulation using a glass-rubber constitutive model

The large-deformation three-dimensional glass-rubber constitutive model for isotropic, amorphous, linear polymers near the glass transition, previously proposed, has been extended to include a spectrum of network relaxations. In addition, an experimental programme of uniaxial tension and compression tests was carried out on high molecular weight cast sheets of poly(methyl methacrylate) (PMMA), with varying strain-rate and temperature across the range from 114 to 190 °C, encompassing the thermoforming range of practical importance. The extended model was found to fit successfully the data for PMMA, provided a doublet network relaxation spectrum was employed. The original model, with only a single network relaxation, was found to be grossly inadequate when there was significant network relaxation by entanglement slippage. Parameters of the model for PMMA, obtained by fitting to the new data, were compared with values obtained by other routes.     

Inductively heated shape memory polymer for the magnetic actuation of medical devices

Presently, there is interest in making medical devices such as expandable stents and intravascular microactuators from shape memory polymer (SMP). One of the key challenges in realizing SMP medical devices is the implementation of a safe and effective method of thermally actuating various device geometries in vivo. A novel scheme of actuation by Curie-thermoregulated inductive heating is presented. Prototype medical devices made from SMP loaded with nickel zinc ferrite ferromagnetic particles were actuated in air by applying an alternating magnetic field to induce heating. Dynamic mechanical thermal analysis was performed on both the particle-loaded and neat SMP materials to assess the impact of the ferrite particles on the mechanical properties of the samples. Calorimetry was used to quantify the rate of heat generation as a function of particle size and volumetric loading of ferrite particles in the SMP. These tests demonstrated the feasibility of SMP actuation by inductive heating. Rapid and uniform heating was achieved in complex device geometries and particle loading up to 10% volume content did not interfere with the shape recovery of the SMP.