Simulations and Experiments of Hot Forging Design and Evaluation of the Aircraft Landing Gear Barrel Al Alloy Structure

In the present study, the hot forging design of a typical landing gear barrel was evolved using finite element simulations and validated with experiments. A DEFORM^3D software was used to evolve the forging steps to obtain the sound quality part free of defects with minimum press force requirements. The hot forging trial of a barrel structure was carried out in a 30 MN hydraulic press based on the simulation outputs. The tensile properties of the part were evaluated by taking samples from all three orientations (longitudinal, long transverse, short transverse). The hardness and microstructure of the part were also investigated. To study the soundness of the product, fluorescent penetrant inspection and ultrasonic testing were performed in order to identify any potential surface or internal defects in the part. From experiments, it was found that the part was formed successfully without any forging defects such as under filling, laps, or folds that validated the effectiveness of the process simulation. The tensile properties of the part were well above the specification limit (>10%) and the properties variation with respect to the orientation was less than 2.5%. The part has qualified the surface defects level of Mil Std 1907 Grade C and the internal defects level of AMS 2630 Class A (2 mm FBh). The microstructure shows mean grain length and width of 167 and 66 µm in the longitudinal direction. However, microstructure results revealed that the coarse grain structure was observed on the flat surface near the lug region due to the dead zone formation. An innovative and simple method of milling the surface layer after each pressing operation was applied to solve the problem of the surface coarse grain structure.     

Design,Synthesis and Evaluation of 2,4-Diaminoquinazoline Derivatives as Potential Tubulin Polymerization Inhibitors

Microtubules are highly dynamic polymers composed of α- and β-tubulin proteins that have been shown to be potential therapeutic targets for the development of anticancer drugs. Currently, a wide variety of chemically diverse agents that bind to β-tubulin have been reported. Nocodazole (NZ) and colchicine (COL) are well-known tubulin-depolymerizing agents that have close binding sites in the β-tubulin. In this study, we designed and synthesized a set of nine 2,4-diaminoquinazoline derivatives that could occupy both NZ and COL binding sites. The synthesized compounds were evaluated for their antiproliferative activities against five cancer cell lines (PC-3, HCT-15, MCF-7, MDA-MB-231, and SK-LU-1), a noncancerous one (COS-7), and peripheral blood mononuclear cells (PBMC). The effect of compounds 4 e and 4 i on tubulin organization and polymerization was analyzed on the SK-LU-1 cell line by indirect immunofluorescence, western blotting, and tubulin polymerization assays. Our results demonstrated that both compounds exert their antiproliferative activity by inhibiting tubulin polymerization. Finally, a possible binding pose of 4 i in the NZ/COL binding site was determined by using molecular docking and molecular dynamics (MD) approaches. To our knowledge, this is the first report of non-N-substituted 2,4-diaminoquinazoline derivatives with the ability to inhibit tubulin polymerization.     

Effect of bacterial inoculum ratio in mixed culture for decolourization and detoxification of pulp paper mill effluent

BACKGROUND: Effluent released from industry is a mixture of various pollutants. For the degradation of complex pollutants, mixed bacterial cultures can be more effective than a single culture. This study investigated the balance of bacterial populations in a mixed culture for maximum reduction of pollutants. RESULTS: This study deals with the degradation and detoxification of pulp paper mill effluent (PPME) by three bacterial strains, i.e. Serratia marcescens, Serratia liquefaciens and Bacillus cereus in different ratios, and found that two ratios, 4:1:1 and 1:4:1, were effective for the degradation of PPME. These ratios reduced the various pollution parameters. Enzyme bioassay revealed that more enzyme was produced during degradation for the ratio 4:1:1. High performance liquid chromatography (HPLC) analysis showed that the ratio 4:1:1 degraded 95% of lignin and related compounds, and chlorophenols up to 98%, whereas ratio 1:4:1 reduced lignin by 84% and chlorophenols by 58% after 7 days incubation. Degradation products were confirmed by gas chromatography–mass spectrometry (GC‐MS) analysis. A seed germination bioassay on Phaseolous mungo L. revealed that toxicity was reduced by the ratio 4:1:1. CONCLUSION: Due to variable potential of different bacteria show variation in their growth pattern at any contaminated site. This study shows that an appropriate ratio of mixed cultures is required for maximum degradation and detoxification of PPME. Copyright © 2012 Society of Chemical Industry     

Production of Methyl Oleate in Reactive‐Separation Systems

The esterification of oleic acid and methanol using sulfuric acid as a homogeneous catalyst is studied in reactive‐separation systems. The conversion of the free fatty acid was investigated in two different experiments with the molar ratio of methanol/oleic acid, amount of catalyst, temperature, and reaction time as variables. The conversion of the free fatty acid was found to depend strongly on the molar ratio of methanol/oleic acid. The reaction time had a direct effect on the conversion of the free fatty acid, and this conversion decreased with higher temperature. These results were valuable for a preliminary study on biodiesel production, using an acid homogeneous catalyst in a reactive dividing‐wall distillation column.     

Singly ionized double-donor complex in vertically coupled quantum dots

ABSTRACT: The electronic states of a singly ionized on-axis double-donor complex (D2+) confined in two identical vertically coupled, axially symmetrical quantum dots in a threading magnetic field are calculated. The solutions of the Schrodinger equation are obtained by a variational separation of variables in the adiabatic limit. Numerical results are shown for bonding and antibonding lowest-lying artificial molecule states corresponding to different quantum dot morphologies, dimensions, separation between them, thicknesses of the wetting layers, and magnetic field strength.     

Distributed resource allocation in cognitive radio networks with a game learning approach to improve aggregate system capacity

This paper presents a game theoretic solution for joint channel allocation and power control in cognitive radio networks analyzed under the physical interference model. The objective is to find a distributed solution that maximizes the network utility, defined with different criteria, with limited information. The problem is addressed through a non-cooperative game based on local information. Although the existence of a pure Nash Equilibrium cannot be assured for this game, simulation results show that it exists with high probability and with a performance similar to that of a potential game, where each player requires overall network information. The obtained results are compared with a centralized heuristic genetic algorithm to show the correctness of the proposals. From this point, utility functions for the local game are modified to restrict the transmitted power to drive the solution to a more cooperative approach. To overcome the convergence limitations of the local game, no-regret learning algorithms are used to perform the joint channel and power allocation. These algorithms provide stable mixed strategies in any scenario with even better global performance. This opens an interesting perspective to develop realistic protocols based on the modeled interactions and increases the adaptability to perform efficient opportunistic spectrum access.     

Endogenous Proteases in Pacific Whiting (Merluccius productus) Muscle as A Processing Aid in Functional Fish Protein Hydrolysate Production

A fish protein hydrolysate (FPH) from Pacific whiting (Merluccius productus) muscle was produced by autolysis of a minced homogenate (8% protein) at pH 7.0 and 60°C, where maximum endogenous proteolytic activity was detected. FPH production was controlled by the pH stat method, yielding a 4.43% degree of hydrolysis after 1 h of autolysis. Upon autolytic processing, 28.9 ± 0.7% of the total protein was found in the soluble fraction. FPH was 100% soluble at pH 7.0 and 10.0 and was less soluble at pH 4 (82.5%, P ≤ 0.05). FPH showed better emulsifying properties than sodium caseinate (SCA) at pH 4.0 (P ≤ 0.05), but had a lower foaming capacity (P ≤ 0.05) than bovine albumin (BSA) at all evaluated pHs. FPH foaming capacity was not affected by pH, however, foam stability was equal or better than that of BSA, especially at pH 4.0 (P ≤ 0.05). These results suggest the possibility of producing FPH with similar or better functional properties than those of functional ingredients, such as SCA and BSA. Furthermore, the data presented support our hypothesis that the high proteolytic activity in Pacific whiting could be used as an advantage in fish protein hydrolysate production or as a processing aid where protein hydrolysis is required.     

An overview on the cellulose based conducting composites

Biopolymer based composites have been employed in numerous applications with increasing interest not only due to renewable, eco-friendly nature, but also because of the flexibility in processing conditions and competitive cost of their end products. The conductive materials from biopolymers have been found applicable in robots, medical imaging, sensitive membranes, actuators, visual displays, electronic wiring and shielding, and components in batteries. Cellulose is one of the most abundant biopolymers in the nature, which has received special attention for development of conducting materials due to biocompatibility for protein and drug immobilization and ability to form the composites with synthetic polymers. The present review is aimed to provide concisely the current status in this field of conducting composites from cellulose, with brief discussions of associated problems and future applications.