In vivo assessment of the corrosion of nickel–titanium orthodontic archwires by using scanning electron microscopy and atomic force microscopy

This study was undertaken to assess in vivo the corrosion in two commercial nickel–titanium (NiTi) orthodontic archwires removed from the oral cavity of patients using fluoride mouthwashes. Five volunteers took part in this study on the corrosion behavior of two brands of NiTi archwires (3M and AO (brand of archwire)) during use of two mouthwashes with neutral sodium fluoride 1.1%, one with acidulated fluoride 1.1%, and one with placebo and a control group. Each patient used one mouthwash in three different periods of time for 1 min a day for 30 days. The archwires were assessed with scanning electron microscopy and atomic force microscopy for qualitative and quantitative analysis. The values obtained with atomic force microscopy (AFM) were submitted to normality test, two‐way analysis of variance, and Tukey's test at a significance level of 5%. The AFM images showed a gradual qualitative increase in the roughness of both types of wire between the treatments: control < placebo < neutral fluoride < acidulated fluoride. The arithmetic average of the roughness and root mean square of the roughness were similar. As for 3M archwires, only the acidulated fluoride group differed statistically from the others. As for AO archwires, the control and placebo groups did not differ from each other, but differed from the other fluoride treatments. The group using neutral fluoride also differed significantly from the acidulated fluoride group. 3M archwires were not affected by daily oral challenges. AO archwires were not affected by daily oral challenges either; their association with fluoride, either neutral or acidulated, increased their roughness.     

Effect of adding fresh and freeze‐dried buckwheat sourdough on gluten‐free bread quality

This study demonstrates new possibilities in using freeze‐dried buckwheat sourdoughs in the processing of gluten‐free bread (GFB). Fresh and freeze‐dried (at temperatures of 20, 40 and 60 °C) sourdoughs were added in the amounts of 10, 20, 30 and 40% of the total flour content. Significant and beneficial changes in the quality of bread under the influence of different quantities of fresh and freeze‐dried sourdoughs additive were observed. Freeze‐dried buckwheat sourdoughs at the level of 20 and 30% gave the best baking results for GFB. pH of bread significantly changed, which had a positive effect on increasing its suitability for the storage. Buckwheat sourdough dried at 40 °C is the most highly recommended for GFB processing. Higher temperatures (60 °C) caused the least change in bread volume; however, a bitter aftertaste from burning was slightly detectable. Freeze‐dried buckwheat sourdoughs can be used directly in processing, thus eliminating the long fermentation of sourdough.     

Effect of 475°C embrittlement on the low cycle fatigue behaviour of lean duplex stainless steels

Lean duplex stainless steels (LDSSs) with lower nickel and molybdenum are less susceptible to suffer spinodal decomposition than standard duplex stainless steels. It is the purpose of this work to study the effect of thermal embrittlement on the low cycle fatigue behaviour of 2 LDSSs with different Cr_eq and Ni_eq. The correlation between the fatigue behaviour and the dislocation structure is attempted. Transmission electron microscopy was used to observe the dislocation microstructure. Additionally, STEM‐EDS technique in conjunction with Vickers microhardness measurements was used to characterize the amplitude of the spinodal decomposition. The results show that the LDSS with lower Cr_eq and Ni_eq values exhibits improved fatigue properties in the as received and aged conditions. Furthermore, it is important to emphasize that with an adequate volume fraction of phases in LDSSs, the ageing treatment leads to an increase in strength without causing a great detriment in low cycle fatigue life.     

Effect of disinfectant solutions on gutta-percha and resilon cones

The aim of this study was to evaluate the effects of the 5.25% sodium hypochlorite (NaOCl), 2% chlorhexidine (CHX), and MTAD solutions on the surface of gutta‐percha and Resilon cones by using atomic force microscopy (AFM). Accessory cones were washed and dried. The cones were randomly divided into six groups: gutta‐percha immersed in NaOCl, CHX, and MTAD, and Resilon immersed in NaOCl, CHX, and MTAD. AFM images of the same area were made in different periods of time. JPK? Image Processing Software was used to evaluate the images. The parameters used to evaluate the changes were RMS and line profiles. No statistically significant change was observed in the RMS values. The line profiles detected changes only for gutta‐percha surfaces after immersion in NaOCl and MTAD solutions. In conclusion, 5.25% NaOCl and MTAD are associated with local changes in surface roughness of gutta‐percha cones. No change was observed when 2% CHX was used. The use of all tested solutions did not produce any changes on Resilon surface. Microsc. Res. Tech. 75:791–795, 2012. © 2012 Wiley Periodicals, Inc.     

Follicular development and morphological changes in the vaginal epithelium during the estrous cycle of Galea spixii

The current study aimed to determine if characteristics observed in vaginal cytology during the estrous cycle of female SYT cavies corresponded with proliferation of the vaginal epithelium, characterized by proliferating cell nuclear antigen (PCNA) immunolocalization, and with follicular development at different phases of the estrous cycle. After determining estrous cycle phases by vaginal cytology, females were euthanized at metestrus, diestrus, proestrus, and estrus. Histological study of the vaginal epithelium and ovary were then performed. Immunohistochemistry for PCNA in vaginal tissue at each cycle phase was also performed. Superficial cornified cells and early post‐ovulatory follicles were found at estrus. Few nuclei below the enucleate superficial cells were immunoreactive to PCNA. At metestrus, the vaginal epithelium underwent desquamation and lost the superficial cornified cells; basal and intermediate cells appeared, and the post‐ovulatory follicle formed an early corpus luteum. No PCNA immunoreactivity was observed. At diestrus, the corpus luteum was developed, and the vaginal epithelium contained basal and intermediate cells. There was PCNA immunoreactivity in the cellular nucleus in the germinative stratum of the epithelium. Because of the growth and maturation of ovarian follicles, the vaginal epithelium suffered intense proliferation at proestrus. Vaginal cytology revealed large intermediate cells and nucleated and enucleated superficial cornified cells. In the ovary, mature follicles were present. More apparent immunoreactivity of PCNA in the germinative layer was found. In summary, we inferred that vaginal exfoliative findings matched the proliferation process of the vaginal epithelium. PCNA immunolocalization occurred as well as corresponding follicular development in the ovaries.     

Poly(vinyl alcohol)/Clay‐Based Nanocomposite Hydrogels: Swelling Behavior and Characterization

Polymer/clay composite hydrogels were prepared based on PVA hydrogels containing 3–10 wt.‐% MOM. Their microstructure and morphology were studied by FT‐IR, WAXS and SEM, whereas the interactions between MOM and PVA were evaluated by thermal analyses. The swelling ratios for the PVA/MOM hydrogels decrease with increasing MOM content. WAXS results indicate that MOM was intercalates, and DSC results show a strong interaction between PVA and MOM. This interaction results in a stable network, which is confirmed by the elastic modulus and the thermal decomposition behavior of the hydrogels. Therefore, MOM acts as a co‐crosslinker, improving the stability of the network.

     

Cadmium accumulation in Scenedesmus vacuolatus under freshwater conditions

Cd accumulation in cultures of Scenedesmus vacuolatus, a freshwater alga, was investigated in water samples from freshwater systems (two hard- and one softwater system) and compared to accumulation from synthetic culture medium. The Cd accumulation in S. vacuolatus was compared to total, labile, and free Cd measured by various analytical methods. In the hardwater samples, Cd accumulation was similar to accumulation from the culture medium and approximately followed the free ion activity model. In the softwater system, Cd accumulation increased with increasing free and total Cd concentrations, but was lower than expected from the free Cd2+ concentrations compared to the other freshwaters and culture media. Cd accumulation in the various freshwaters was not simply related to labile and free Cd concentrations measured by several methods. From experiments using fulvic acid as a ligand in the culture medium, no influence on Cd accumulation other than by modifying the Cd speciation was detected. Modeling of the Cd uptake revealed that besides cation and proton competition, other factors such as dissolved organic carbon composition and the presence of colloids might reduce Cd accumulation in softwater systems.